Hello, On one of my computer I get at the end of the boot: cd0 at ata1 bus 0 target 0 lun 0 cd0: <LITE-ON DVDRW SHM-165P6S MS0F> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present flowtable clean(cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error cd1 at ata1 bus 0 target 1 lun 0 cd1: <HP CD-Writer+ 8200 1.0f> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present er started GEOM: new disk cd0 GEOM: new disk cd1 (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x20:0xc057ecb1 stack pointer = 0x28:0xc2e918fc frame pointer = 0x28:0xc2e91930 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 1 (kernel) [thread pid 1 tid 100002 ] Stopped at devfs_populate_loop+0x201: movl %edi,0(%eax) db> bt Tracing pid 1 tid 100002 td 0xc3150d80 devfs_populate_loop(0,c2e91a10,c0582d57,c347da40,c2e919a8,...) at devfs_populate_loop+0x201 devfs_populate(c347da40,c2e919a8,61,c148a08c,c2e91978,...) at devfs_populate+0x1b devfs_lookup(c2e91a84,c3351d9c,80400,c08e779c,1ec,...) at devfs_lookup+0x2c7 VOP_LOOKUP_APV(c0923980,c2e91a84,c2e91be0,1ec,c3350060,...) at VOP_LOOKUP_APV+0x53 lookup(c2e91bb4,c3486000,400,c2e91bd4,0,...) at lookup+0x3fe namei(c2e91bb4,c3351e10,0,0,0,...) at namei+0x642 kern_symlinkat(c3150d80,c08d9d99,ffffff9c,c08e7ab4,1,...) at kern_symlinkat+0xe6 kern_symlink(c3150d80,c08d9d99,c08e7ab4,1,c068ef10,...) at kern_symlink+0x2e vfs_mountroot(c098c510,c3150d80,0,0,0,...) at vfs_mountroot+0x5dd start_init(0,c2e91d38,0,0,0,...) at start_init+0x3c fork_exit(c05b6340,0,c2e91d38) at fork_exit+0x88 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip = 0, esp = 0xc2e91d70, ebp = 0 --- db> Is it a hardware problem ? I boot it with a 6.1 CD without problem. HenriReceived on Thu Jul 16 2009 - 06:39:47 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC