On Tuesday 21 July 2009 5:46:10 am Paul B. Mahol wrote: > On 7/20/09, Gonzalo Nemmi <gnemmi_at_gmail.com> wrote: > > On Sunday 19 July 2009 7:53:52 pm Paul B. Mahol wrote: > >> On 7/20/09, Gonzalo Nemmi <gnemmi_at_gmail.com> wrote: > >> > On Sat, Jul 18, 2009 at 12:09 AM, Paul B. Mahol > >> > <onemda_at_gmail.com> > > > > wrote: > >> >> On 7/17/09, Gonzalo Nemmi <gnemmi_at_gmail.com> wrote: > >> >> > On Wednesday 15 July 2009 8:13:47 am Adam K Kirchhoff wrote: > >> >> >> On Wednesday 15 July 2009 03:20:45 Paul B. Mahol wrote: > >> >> >> > On 7/15/09, Adam K Kirchhoff <adamk_at_voicenet.com> wrote: > >> >> >> > > Hello all, > >> >> >> > > > >> >> >> > > I have a Dell Latitude D610 laptop with 8.0-BETA1 > >> >> >> > > installed. I hadn't tried suspend/resume for a while > >> >> >> > > and decided to give it a shot. I was pleasantly > >> >> >> > > surprised to see that I could suspend to ram, resume, > >> >> >> > > and have a (relatively) working system (previously the > >> >> >> > > display would never come back up and the serial console > >> >> >> > > I had hooked up remained dead). Great job to everyone > >> >> >> > > who helped make that possible. > >> >> >> > > > >> >> >> > > The only real issue that I seem to have now is that bge > >> >> >> > > is completely unusable after resume. Another individual > >> >> >> > > seems to have reported similar problems with bge and > >> >> >> > > resume, but he also had other issues that apparently > >> >> >> > > trumped his networking issues: > >> >> >> > > > >> >> >> > > http://lists.freebsd.org/pipermail/freebsd-current/2009- > >> >> >> > >Jul y/0090 23.html > >> >> >> > > > >> >> >> > > Like him, resuming from suspend gives me: > >> >> >> > > > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 0, val 32768) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY read timed out > >> >> >> > > (phy 1, reg 0, val 0xffffffff) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 24, val 3072) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 23, val 10) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 21, val 12555) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 23, val 8223) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 21, val 38150) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 23, val 16415) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 21, val 5346) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 24, val 1024) > >> >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> >> > > (phy 1, reg 24, val 7) > >> >> >> > > > >> >> >> > > And so on and so forth. > >> >> >> > > > >> >> >> > > I thought that compiling if_bge as a module, unloading > >> >> >> > > it before suspend, and reloading it after resume, might > >> >> >> > > get this working. However, doing a "kldload if_bge" > >> >> >> > > after the resume does nothing. Well, the module gets > >> >> >> > > loaded, but the device doesn't show up. No errors from > >> >> >> > > kldload, and there is nothing new in dmesg. > >> >> >> > > > >> >> >> > > Before the suspend, the device shows up as: > >> >> >> > > > >> >> >> > > bge0_at_pci0:2:0:0: class=0x020000 card=0x01821028 > >> >> >> > > chip=0x167714e4 rev=0x01 hdr=0x00 > >> >> >> > > vendor = 'Broadcom Corporation' > >> >> >> > > device = 'NetXtreme Gigabit Ethernet PCI Express > >> >> >> > > (BCM5750A1)' class = network > >> >> >> > > subclass = ethernet > >> >> >> > > > >> >> >> > > After resuming, and reloading the module, it's: > >> >> >> > > > >> >> >> > > none1_at_pci0:2:0:0: class=0x020000 card=0x01821028 > >> >> >> > > chip=0x167714e4 rev=0x01 hdr=0x00 > >> >> >> > > vendor = 'Broadcom Corporation' > >> >> >> > > device = 'NetXtreme Gigabit Ethernet PCI Express > >> >> >> > > (BCM5750A1)' class = network > >> >> >> > > subclass = ethernet > >> >> >> > > > >> >> >> > > If there are no ideas, I'll go ahead and open up a pr. > >> >> >> > > I assume this is just one bug, since both problems (the > >> >> >> > > PHY issues and the inability to reload the driver) are > >> >> >> > > both related to the network device. > >> >> >> > > >> >> >> > Put this lines into loader.conf and reboot. > >> >> >> > > >> >> >> > hw.pci.do_power_nodriver="3" > >> >> >> > hw.pci.do_power_resume="1" > >> >> >> > > >> >> >> > Now, before suspend, unload if_bge and some another driver > >> >> >> > (sound drivers are best candidate) and load sound driver > >> >> >> > again, suspend and resume. > >> >> >> > Now loading if_bge should make it succesfully attach. > >> >> >> > >> >> >> Unfortunately, after doing this, reloading the if_bge driver > >> >> >> causes the laptop to completely lock up... It gets as far > >> >> >> as: > >> >> >> > >> >> >> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, > >> >> >> unknown ASIC rev. 0xffff> > >> >> >> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci2 > >> >> >> > >> >> >> And then the entire machine hangs. I'm on ttyv0, so I'd see > >> >> >> any kernel panic, but nothing like that happens. The screen > >> >> >> stays on, but nothing else happens till I force a reboot. > >> >> >> > >> >> >> Adam > >> >> > > >> >> > Hi Adam, Paul ... > >> >> > I'm the "another individual" from you OP. > >> >> > I have the same problems you have regarding bge, but they > >> >> > weren't trumped .. I just had an order of priorities ;) > >> >> > > >> >> > Anyways, I tried the solution Paul posted and, just as in > >> >> > your case, I got a hard lock too ... > >> >> > > >> >> > I tried loading if_bge through /boot/loader.conf > >> >> > Then issued a: > >> >> > > >> >> > kldunload if_bge coretemp > >> >> > >> >> coretemp is wrong module, it must be one of modules that attach > >> >> to pci. > >> > > >> > Sorry Paul! > >> > I gave it a go with snd_hda and I got the same result except > >> > that this time I also got the following message: > >> > >> After unloading snd_hda you loaded it again before suspending? > > > > Doing so yielded a Fatal trap 12 on BETA2. Yesterday I install > > BETA2 and here are the results: > > > > > > kldstat > > > > Id Refs Address Size Name > > 1 28 0xc0400000 cf6c70 kernel > > 2 1 0xc10f7000 11bc0 if_bge.ko > > 3 1 0xc1109000 1ac4c snd_hda.ko > > 4 2 0xc1124000 61f78 sound.ko > > 5 1 0xc1186000 2af4 coretemp.ko > > 6 1 0xc1189000 a6d8 i915.ko > > 7 2 0xc1194000 177d4 drm.ko > > > > > > kldunload if_bge snd_hda > > > > Jul 20 17:50:49 gargoyle login: ROOT LOGIN (root) ON ttyv0 > > Jul 20 17:51:06 gargoyle kernel: brgphy0: detached > > Jul 20 17:51:06 gargoyle kernel: lock order reversal: > > Jul 20 17:51:06 gargoyle kernel: 1st 0xc0dba45c kernel linker > > (kernel linker) _at_ /usr/src/sys/kern/kern_linker.c:1079 > > Jul 20 17:51:06 gargoyle kernel: 2nd 0xc0dbbc64 sysctl lock (sysctl > > lock) _at_ /usr/src/sys/kern/kern_sysctl.c:257 > > Jul 20 17:51:06 gargoyle kernel: KDB: stack backtrace: > > Jul 20 17:51:06 gargoyle kernel: > > db_trace_self_wrapper(c0c6baf4,e6daba34,c08bc995,c08ad6db,c0c6e989, > >...) at db_trace_self_wrapper+0x26 > > Jul 20 17:51:06 gargoyle kernel: > > kdb_backtrace(c08ad6db,c0c6e989,c452bc88,c4529e10,e6daba90,...) at > > kdb_backtrace+0x29 > > Jul 20 17:51:06 gargoyle kernel: > > _witness_debugger(c0c6e989,c0dbbc64,c0c69667,c4529e10,c0c6956e,...) > > at _witness_debugger+0x25 > > Jul 20 17:51:06 gargoyle kernel: > > witness_checkorder(c0dbbc64,9,c0c6956e,101,0,...) at > > witness_checkorder+0x839 > > Jul 20 17:51:06 gargoyle kernel: > > _sx_xlock(c0dbbc64,0,c0c6956e,101,c4722c00,...) at _sx_xlock+0x85 > > Jul 20 17:51:06 gargoyle kernel: > > sysctl_ctx_free(c4722c4c,c4722c00,e6dabb18,c08a3c85,c4722c00,...) > > at sysctl_ctx_free+0x30 > > Jul 20 17:51:06 gargoyle kernel: > > device_sysctl_fini(c4722c00,0,c0d4c848,c472a810,c4ab3400,...) at > > device_sysctl_fini+0x1a > > Jul 20 17:51:06 gargoyle kernel: > > device_detach(c4722c00,c4722b80,e6dabb38,c06bc622,c4722b80,...) at > > device_detach+0x1f5 > > Jul 20 17:51:06 gargoyle kernel: > > bus_generic_detach(c4722b80,c4722b80,e6dabb64,c08a3b1c,c4722b80,... > >) at bus_generic_detach+0x29 > > Jul 20 17:51:06 gargoyle kernel: > > miibus_detach(c4722b80,c45d6060,c0d4ca68,a3c,c0c76f47,...) at > > miibus_detach+0x12 > > Jul 20 17:51:06 gargoyle kernel: > > device_detach(c4722b80,c472b008,e6dabb98,c10ff7ff,c4722300,...) at > > device_detach+0x8c > > Jul 20 17:51:06 gargoyle kernel: > > bus_generic_detach(c4722300,1,c1104b66,aec,c4722300,...) at > > bus_generic_detach+0x29 > > Jul 20 17:51:06 gargoyle kernel: > > bge_detach(c4722300,c4677060,c0d4ca68,a3c,c4526300,...) at > > bge_detach+0xbf > > Jul 20 17:51:06 gargoyle kernel: > > device_detach(c4722300,c086c843,c0dbb570,c1106c20,c456fb80,...) at > > device_detach+0x8c > > Jul 20 17:51:06 gargoyle kernel: > > driver_module_handler(c4526300,1,c1106c20,109,0,...) at > > driver_module_handler+0x29c > > Jul 20 17:51:06 gargoyle kernel: > > module_unload(c4526300,c0c652ef,273,270,c08604b6,...) at > > module_unload+0x43 > > Jul 20 17:51:06 gargoyle kernel: > > linker_file_unload(c4544200,0,c0c652ef,437,c10f7000,...) at > > linker_file_unload+0x15e > > Jul 20 17:51:06 gargoyle kernel: > > kern_kldunload(c4b346c0,2,0,e6dabd2c,c0ba8dd3,...) at > > kern_kldunload+0xd5 > > Jul 20 17:51:06 gargoyle kernel: > > kldunloadf(c4b346c0,e6dabcf8,8,c0c6fa4b,c0d50450,...) at > > kldunloadf+0x2b > > Jul 20 17:51:06 gargoyle kernel: syscall(e6dabd38) at syscall+0x2a3 > > Jul 20 17:51:06 gargoyle kernel: Xint0x80_syscall() at > > Xint0x80_syscall+0x20 > > Jul 20 17:51:06 gargoyle kernel: --- syscall (444, FreeBSD ELF32, > > kldunloadf), eip = 0x280d516b, esp = 0xbfbfe47c, ebp = 0xbfbfecc8 > > --- Jul 20 17:51:06 gargoyle kernel: miibus0: detached > > Jul 20 17:51:06 gargoyle kernel: bge0: detached > > Jul 20 17:51:06 gargoyle kernel: sysctl_unregister_oid: failed to > > unregister sysctl > > if_bge driver looks very problematic to me. Probably it can not > detach at all. > > > Jul 20 17:51:06 gargoyle kernel: pcm0: detached > > Jul 20 17:51:06 gargoyle kernel: hdac0: detached > > > > > > kld snd_hda > > ^^^ > You mean kldload. > > > Jul 20 17:52:16 gargoyle kernel: hdac0: <Intel 82801H High > > Definition Audio Controller> mem 0xf6dfc000-0xf6dfffff irq 21 at > > device 27.0 on pci0 > > Jul 20 17:52:16 gargoyle kernel: hdac0: HDA Driver Revision: > > 20090624_0136 > > Jul 20 17:52:16 gargoyle kernel: hdac0: [ITHREAD] > > Jul 20 17:52:16 gargoyle kernel: hdac0: HDA Codec #0: Sigmatel > > STAC9228X Jul 20 17:52:16 gargoyle kernel: bge0: <Broadcom BCM5906 > > A2, ASIC rev. 0xc002> mem 0xf69f0000-0xf69fffff irq 17 at device > > 0.0 on pci9 Jul 20 17:52:16 gargoyle kernel: miibus0: <MII bus> on > > bge0 Jul 20 17:52:16 gargoyle kernel: brgphy0: <BCM5906 > > 10/100baseTX PHY> PHY 1 on miibus0 > > Jul 20 17:52:16 gargoyle kernel: brgphy0: 10baseT, 10baseT-FDX, > > 100baseTX, 100baseTX-FDX, auto > > Jul 20 17:52:16 gargoyle kernel: bge0: Ethernet address: > > 00:23:ae:04:ba:ca > > Jul 20 17:52:16 gargoyle kernel: bge0: [ITHREAD] > > Jul 20 17:52:16 gargoyle kernel: pcm0: <HDA Sigmatel STAC9228X PCM > > #0 Analog> at cad 0 nid 1 on hdac0 > > Jul 20 17:52:16 gargoyle kernel: bge0: link state changed to DOWN > > Jul 20 17:52:18 gargoyle kernel: bge0: link state changed to UP > > Why bge0 appeared again? > > > acpiconf -s 3 > > After this command bge0 should not appear at all because it should > not be attached to > device. > > > Jul 20 17:53:51 gargoyle acpi: suspend at 20090720 17:53:51 > > Jul 20 17:53:56 gargoyle kernel: fwohci0: fwohci_pci_suspend > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, > > reg 0, val 32768) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, > > reg 0, val 0xffffffff) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, > > reg 24, val 0xffffffff) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, > > reg 16, val 0xffffffff) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, > > reg 16, val 0) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, > > reg 16, val 0xffffffff) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, > > reg 16, val 0) > > Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, > > reg 23, val 18) > > Jul 20 17:54:25 gargoyle kernel: bge0: flow-through queue init > > failed Jul 20 17:54:25 gargoyle kernel: bge0: initialization > > failure Jul 20 17:54:25 gargoyle kernel: fwohci0: Phy 1394a > > available S400, 1 ports. > > Jul 20 17:54:25 gargoyle kernel: fwohci0: Link S400, max_rec 2048 > > bytes. Jul 20 17:54:25 gargoyle kernel: fwohci0: Initiate bus reset > > Jul 20 17:54:25 gargoyle kernel: fwohci0: fwohci_intr_core: BUS > > reset Jul 20 17:54:25 gargoyle kernel: fwohci0: fwohci_intr_core: > > node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode > > Jul 20 17:54:25 gargoyle kernel: firewire0: 1 nodes, maxhop <= 0 > > cable IRM irm(0) (me) > > Jul 20 17:54:25 gargoyle kernel: firewire0: bus manager 0 > > Jul 20 17:54:25 gargoyle kernel: fwohci0: unrecoverable error > > Jul 20 17:54:25 gargoyle kernel: wakeup from sleeping state (slept > > 00:00:29) > > Jul 20 17:54:25 gargoyle acpi: resumed at 20090720 17:54:25 > > > > Should a PR on fwohci and firewire also be filed?? > > Try with custom kernel with smaller number of drivers as possible. > (use modules instead) > From your mail I dont see where is problem with firewire. Done. Commented if_bge out of GENERIC, recompiled, loaded if_bge via loader.conf, kldunloaded if_bge snd_hda, kloaded snd_hda (if_bge did not show up on dmesg this time), went to sleep (acpiconf -s 3), resumed, no bge timeouts (only fwohci and firewire messages), then kldloaded if_bge and got a solid freeze :( Best Regards Gonzalo NemmiReceived on Tue Jul 21 2009 - 21:34:08 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC