> I have 7.2-RELEASE/i386 running perfectly using the same motherboard that is > causing me nfe problems in 8.0-BETA2/amd64. I then decided to see if > perhaps it was something with i386 vs amd64, so I downloaded a > 7.2-RELEASE/amd64 iso, and the nics worked perfectly there as well. > > Seeing that nfe apparently worked on June 1st, I headed to the FTP to see > which snapshots were available. The earliest -CURRENT June snapshot was > dated the 8th, so I grabbed that one. The nics didn't work at all. > > So, there's a small window where something changed which broke nfe. Looking > at the SVN commit logs for if_nfe.c, nothing really fits in that window. To > me, this looks like something about general network device handling changed > which nfe nics can't cope with. I have no idea what that could be though, > so I'm hoping that someone on this list would be able to point me in the > right direction. > > Ryan Yes I can confirm that FreeBSD 7.x works, because PC-BSD 7.1.1 works the only thing I can add is I have a motherboard with MCP73 based nfe nic and that nic works fine with FreeBSD8 BETA2/amd64 What I find odd, is that on MCP55 boards the 2nd nic will work, I am writing this Email on a FreeBSD 8 Beta2/i386 machine. using nfe1. Does anyone have any Ideas? I have 4 of these MCP55 based boards, and public internet ip's I would be willing to set someone up with root ssh access and a firewire connection to another box. here is a dmesg Sam Fourman Jr. dmesg Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA2 #1: Thu Jul 16 17:03:33 CDT 2009 sfourman_at_:/usr/obj/usr/src/sys/Ziggy Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q8400 _at_ 2.66GHz (2666.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3132448768 (2987 MB) ACPI APIC Table: <022609 APIC1009> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <022609 XSDT1009> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 1.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1 nvidia0: <GeForce GTX 275> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf7ffb000-0xf7ffbfff irq 22 at device 11.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7ffac00-0xf7ffacff irq 23 at device 11.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xf7ff9000-0xf7ff9fff irq 21 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xf7ff8000-0xf7ff8fff irq 22 at device 14.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xf7ff7000-0xf7ff7fff irq 23 at device 14.2 on pci0 atapci3: [ITHREAD] ata6: <ATA channel 0> on atapci3 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci3 ata7: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci3: <ACPI PCI bus> on pcib3 hdac0: <NVidia MCP55 High Definition Audio Controller> mem 0xf7ff0000-0xf7ff3fff irq 21 at device 15.1 on pci0 hdac0: HDA Driver Revision: 20090624_0136 hdac0: [ITHREAD] nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb080-0xb087 mem 0xf7ff6000-0xf7ff6fff,0xf7ffa800-0xf7ffa8ff,0xf7ffa400-0xf7ffa40f irq 20 at device 17.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: Ethernet address: 00:23:54:96:dd:8d nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xf7ff5000-0xf7ff5fff,0xf7ffa000-0xf7ffa0ff,0xf7ff4c00-0xf7ff4c0f irq 20 at device 18.0 on pci0 miibus1: <MII bus> on nfe1 e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 2 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe1: Ethernet address: 00:23:54:96:de:2f nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 24.0 on pci0 pci7: <ACPI PCI bus> on pcib7 acpi_button0: <Power Button> on acpi0 ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found Package, expected Buffer 20090521 nspredef-1051 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] atrtc1: <AT realtime clock> port 0x70-0x71 on acpi0 cpu0: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616082506000825 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616082506000825 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616082506000825 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616082506000825 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: Warning: Couldn't map Interrupt. ppc0: parallel port not found. Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad4: 152627MB <Seagate ST3160815AS 3.AAC> at ata2-master SATA300 ugen0.1: <nVidia> at usbus0 uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <nVidia> at usbus1 uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ad6: 152627MB <Seagate ST3160815AS 3.AAC> at ata3-master SATA300 GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). ad10: 238475MB <Seagate ST3250820AS 3.AAD> at ata5-master SATA300 acd0: DVDR <SONY DVD RW AW-G170S/1.72> at ata6-master SATA150 acd1: DVDR <SONY DVD RW AW-G170S/1.72> at ata7-master SATA150 hdac0: HDA Codec #0: Analog Devices AD1988B pcm0: <HDA Analog Devices AD1988B PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Analog Devices AD1988B PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Analog Devices AD1988B PCM #2 Digital> at cad 0 nid 1 on hdac0 GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s). uhub0: 10 ports with 10 removable, self powered (probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata3:0:0:0): CAM Status: SCSI Status Error (probe0:ata3:0:0:0): SCSI Status: Check Condition (probe0:ata3:0:0:0): NOT READY asc:3a,0 (probe0:ata3:0:0:0): Medium not present sks:0x80,0xffff (probe0:ata3:0:0:0): Unretryable error cd1 at ata4 bus 0 target 0 lun 0 cd1: <SONY DVD RW AW-G170S 1.72> Removable CD-ROM SCSI-0 device cd1: 3.300MB/s transfers cd1: cd present [1 x 2048 byte records] cd0 at ata3 bus 0 target 0 lun 0 cd0: <SONY DVD RW AW-G170S 1.72> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! acd1: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd1: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Root mount waiting for: usbus1 Root mount waiting for: usbus1 uhub1: 10 ports with 10 removable, self powered Root mount waiting for: usbus1 ugen0.2: <vendor 0x046d> at usbus0 uhub2: <vendor 0x046d product 0xc223, class 9/0, rev 1.10/1.03, addr 2> on usbus0 ugen1.2: <Ralink> at usbus1 Trying to mount root from ufs:/dev/ad6s1a uhub2: 4 ports with 2 removable, bus powered ugen0.3: <Logitech> at usbus0 ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> on usbus0 kbd2 at ukbd0 uhid0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> on usbus0 ugen0.4: <Logitech> at usbus0 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 4> on usbus0 ums0: 8 buttons and [XYZ] coordinates ID=0 ugen0.5: <vendor 0x046d> at usbus0 hid_get_item:304: Number of items truncated to 255 hid_get_item:304: Number of items truncated to 255 uhid1: <vendor 0x046d product 0xc222, class 0/0, rev 2.00/1.03, addr 5> on usbus0 hid_get_item:304: Number of items truncated to 255 hid_get_item:304: Number of items truncated to 255 hid_get_item:304: Number of items truncated to 255 acd1: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 nfe1: link state changed to DOWN nfe1: link state changed to UP pid 98341 (vlc), uid 1001: exited on signal 11 (core dumped) WARNING: R/W mount of / denied. Filesystem is not clean - run fsck WARNING: R/W mount of / denied. Filesystem is not clean - run fsck pid 1642 (npviewer.bin), uid 1001: exited on signal 11 (core dumped) nfe0: link state changed to DOWN nfe0: link state changed to UP Sam Fourman Jr.Received on Tue Jul 21 2009 - 22:14:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC