On Wed, July 22, 2009 15:41, Freddie Cash wrote: > On Wed, Jul 22, 2009 at 6:12 AM, Nenhum_de_Nos > <matheus_at_eternamente.info>wrote: > >> >> On Wed, July 15, 2009 13:22, Freddie Cash wrote: >> > On Tue, Jul 14, 2009 at 8:44 PM, Randy Bush <randy_at_psg.com> wrote: >> > >> >> > # glabel label disk01 /dev/ad4 >> >> > # glabel label disk02 /dev/ad6 >> >> > # glabel label disk03 /dev/ad8 >> >> > # zpool create pool raidz1 label/disk01 label/disk02 label/disk03 >> >> > >> >> > After that, you can shuffle the drives around in the system, and >> the >> >> pool >> >> > will continue to work correctly. >> >> >> >> ooooooo! i wish i had understood that when i built a large set of >> >> mirrored raid. >> >> >> >> any way to hack it ex post facto? >> >> >> > >> > Yep. It's as simple as: >> > >> > * label all the drives using glabel, while they're still attached to >> the >> > pool >> > * use "zpool replace pool ad4 label/disk01" to replace 1 drive >> > * wait for it to resilver >> > * use "zpool replace pool ad6 label/disk02" to replace the next >> drive >> > * repeat the resilver and replace until all the devices are replaced >> > >> > This is what I did to one of our servers. Works quite nicely. >> > >> > There's no need to detach anything. >> >> was all this supposed to work with raidz ? >> >> here it doesn't. >> >> harry# zpool status >> pool: zdados >> state: ONLINE >> scrub: none requested >> config: >> >> NAME STATE READ WRITE CKSUM >> zdados ONLINE 0 0 0 >> raidz1 ONLINE 0 0 0 >> ad8 ONLINE 0 0 0 >> ad10 ONLINE 0 0 0 >> ad12 ONLINE 0 0 0 >> >> errors: No known data errors >> harry# zpool detach zdados ad8 >> cannot detach ad8: only applicable to mirror and replacing vdevs >> > > Reread what you quoted. :) Note how there's no "detach" step. :) Just > label and replace. ok, my bad :) I used the wrong mail to quote and get into the thread. bellow this message, I think I saw someone saying not to do this. use the detach. I'll try anyway. not much sensitive data here... thanks, matheus -- We will call you cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_styleReceived on Wed Jul 22 2009 - 22:08:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC