Re: mixed VLAN problems on msk(4)

From: Pyun YongHyeon <pyunyh_at_gmail.com>
Date: Wed, 10 Jun 2009 18:22:36 +0900
On Wed, Jun 10, 2009 at 05:22:55PM +0900, Pyun YongHyeon wrote:
> On Tue, Jun 09, 2009 at 03:27:40PM +0200, Ian FREISLICH wrote:
> > Pyun YongHyeon wrote:
> > > On Tue, Jun 09, 2009 at 12:58:23PM +0200, Ian Freislich wrote:
> > > > Hi
> > > > 
> > > > Debugging some network problems last night, I noticed that I'd get
> > > > packet loss on a mixed tagged/untagged network every time a tagged
> > > > VLAN packet arrived, so long as hardware VLAN support was enabled
> > > > on my NIC.  The moment hardware tagging was disabled (manually, or
> > > > by tcpdump) the packet loss disappeared.
> > > > 
> > > > My msk(4) hardware:
> > > > 
> > > > mskc0_at_pci0:2:0:0:       class=0x020000 card=0x532111ab chip=0x436211ab rev=
> > 0x22 hdr=0x00
> > > >     vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
> > > >     device     = 'Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller (
> > 88E8053)'
> > > >     class      = network
> > > >     subclass   = ethernet
> > > >     cap 01[48] = powerspec 2  supports D0 D1 D2 D3  current D0
> > > >     cap 03[50] = VPD
> > > >     cap 05[5c] = MSI supports 2 messages, 64 bit enabled with 2 messages
> > > >     cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1
> > )
> > > > 
> > > > The switch was configured as follows:
> > > > 
> > > > Port is member in: 
> > > >  
> > > > Vlan               Name               Egress rule Port Membership Type 
> > > > ---- -------------------------------- ----------- -------------------- 
> > > >  14                 14                 Untagged          Static        
> > > >  26                 26                  Tagged           Static        
> > > > 1000               1000                 Tagged           Static        
> > > > 
> > > > It appears not to matter whether the vlans are configured with the
> > > > msk(4) interface as the parent or not.  For example, whenever one
> > > > of these broadcasts is recieved:
> > > > 
> > > > 12:49:36.093250 IP 41.154.87.2 > 224.0.0.18: VRRPv2, Advertisement, vrid 19
> > , prio 0, authtype none, intvl 1s, length 36
> > > > 12:49:37.097514 IP 41.154.87.2 > 224.0.0.18: VRRPv2, Advertisement, vrid 19
> > , prio 0, authtype none, intvl 1s, length 36
> > > > 12:49:38.099525 IP 41.154.87.2 > 224.0.0.18: VRRPv2, Advertisement, vrid 19
> > , prio 0, authtype none, intvl 1s, length 36
> > > > 
> > > > traffic to the untagged address on vlan14 (basically the address
> > > > on msk0) is dropped.  If I disable vlanhwtag on msk0, the interface
> > > > suffers no packet loss on reciept of tagged frames.
> > > > 
> 
> Does that mean msk(4) cannot see untagged frame if VLAN hardware
> tag stripping is enabled on msk(4)? I don't see suspicious part in
> code at this moment. Does hardware MAC statistics report something?
> (sysctl dev.msk.0.stats) Or netstat(1) says Ierrs/Drop on vlan/msk0?
> 
> I have small patch which corrects bus_dma related bugs but I'm not
> sure it can fix the VLAN issue.
> 

Patch attached.


Received on Wed Jun 10 2009 - 07:20:17 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:49 UTC