problem with digicam

hi everybody,

i'm having problems getting my digicam attached. i've emailed hans petter
about this problem, but he's rather busy atm.

this is what i get without any quirks:

Jun  6 22:00:06 moshnroll kernel: ugen1.2: <ROLLEI> at usbus1
Jun  6 22:00:06 moshnroll kernel: umass0: <ROLLEI RCP-7330X, class 0/0, rev
2.00/0.00, addr 2> on usbus1
Jun  6 22:00:06 moshnroll kernel: umass0:  8070i (ATAPI) over Bulk-Only;
quirks = 0x0000
Jun  6 22:00:06 moshnroll root: Unknown USB device: vendor 0x0784 product
0x1692 bus uhub1
Jun  6 22:00:07 moshnroll kernel: umass0:2:0:-1: Attached to scbus2
Jun  6 22:00:07 moshnroll kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Jun  6 22:00:07 moshnroll kernel: da0: <ROLLEI RCP-7330X 1.10> Removable
Direct Access SCSI-0 device
Jun  6 22:00:07 moshnroll kernel: da0: 1.000MB/s transfers
Jun  6 22:00:07 moshnroll kernel: da0: 999MB (2047815 512 byte sectors: 64H
32S/T 999C)
Jun  6 22:00:07 moshnroll kernel: GEOM: da0: partition 1 does not start on a
track boundary.
Jun  6 22:00:07 moshnroll kernel: GEOM: da0: partition 1 does not end on a
track boundary.
Jun  6 22:00:07 moshnroll kernel: (da0:umass-sim0:0:0:0): Synchronize cache
failed, status == 0x4, scsi status == 0x0
Jun  6 22:00:23 moshnroll kernel: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0
0 1f 3f 46 0 0 1 0
Jun  6 22:00:23 moshnroll kernel: (da0:umass-sim0:0:0:0): CAM Status: SCSI
Status Error
Jun  6 22:00:23 moshnroll kernel: (da0:umass-sim0:0:0:0): SCSI Status: Check
Condition
Jun  6 22:00:23 moshnroll kernel: (da0:umass-sim0:0:0:0): MEDIUM ERROR
asc:11,0
Jun  6 22:00:23 moshnroll kernel: (da0:umass-sim0:0:0:0): Unrecovered read
error
...

after adding NO_SYNCHRONIZE_CACHE and RS_NO_CLEAR_UA this is the result:

Jun 11 15:10:23 moshnroll root: Unknown USB device: vendor 0x0784 product
0x1692 bus uhub1
Jun 11 15:10:23 moshnroll kernel: ugen1.2: <ROLLEI> at usbus1
Jun 11 15:10:23 moshnroll kernel: umass0: <ROLLEI RCP-7330X, class 0/0, rev
2.00/0.00, addr 2> on usbus1
Jun 11 15:10:23 moshnroll kernel: umass0:  8070i (ATAPI) over Bulk-Only;
quirks = 0x4100
Jun 11 15:10:24 moshnroll kernel: umass0:2:0:-1: Attached to scbus2
Jun 11 15:10:24 moshnroll kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Jun 11 15:10:24 moshnroll kernel: da0: <ROLLEI RCP-7330X 1.10> Removable
Direct Access SCSI-0 device
Jun 11 15:10:24 moshnroll kernel: da0: 1.000MB/s transfers
Jun 11 15:10:24 moshnroll kernel: da0: 999MB (2047815 512 byte sectors: 64H
32S/T 999C)
Jun 11 15:10:24 moshnroll kernel: GEOM: da0: partition 1 does not start on a
track boundary.
Jun 11 15:10:24 moshnroll kernel: GEOM: da0: partition 1 does not end on a
track boundary.
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0
0 1f 3f 46 0 0 1 0
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): CAM Status: SCSI
Status Error
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): SCSI Status: Check
Condition
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): MEDIUM ERROR
asc:11,0
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): Unrecovered read
error
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): Retrying Command
(per Sense Data)
Jun 11 15:10:40 moshnroll kernel: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0
0 1f 3f 46 0 0 1 0
...

i've tried various combinations of quirks, but i'm no expert and there're just
are too many combinations.

could anybody tell me which quirks my digicam needs?

i'm running r193846M and this is the device which is causing problems:

ugen1.2: <RCP-7330X ROLLEI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0784
  idProduct = 0x1692
  bcdDevice = 0x0000
  iManufacturer = 0x0001  <ROLLEI>
  iProduct = 0x0002  <RCP-7330X>
  iSerialNumber = 0x0003  <0000000000000000>
  bNumConfigurations = 0x0001

cheers.