[looks like my first post didn't went thru so here goes again...] I wanted to try a head snapshot iso a few days ago and it failed to boot: http://people.freebsd.org/~nox/20090623-JPSNAP-amd64-bootpanic1.jpg http://people.freebsd.org/~nox/20090623-JPSNAP-amd64-bootpanic2.jpg (I tried to get a serial console but couldn't get this box' serial port working for some reason... ): As you can see in the jpegs it panic'd at pmap_extract+0x106, which I _think_ is in line 963: (unfortunately there's no kernel.symbols on the iso) pdep = pmap_pde(pmap, va); (see http://fxr.watson.org/fxr/source/amd64/amd64/pmap.c#L963 ), and that got invoked from isa_dmarangecheck+0x98: http://fxr.watson.org/fxr/source/amd64/isa/isa_dma.c#L374 So, anyone have an idea what's up with this? This box is running 7-stable/amd64 without major issues: FreeBSD triton.kn-bremen.de 7.2-STABLE FreeBSD 7.2-STABLE #0: Sun May 10 19:06:01 CEST 2009 (there are some usb problems which made me curious to try out the new usb stack, and also k3b hangs on startup causing an irq storm on one cpu until reboot, but this pmap_extract panic certainly is new.) Also interestingly the i386 snapshot from the same date, http://pub.allbsd.org/FreeBSD-snapshots/i386/8.0-HEAD-20090623-JPSNAP/cdrom/8.0-HEAD-20090623-JPSNAP-i386-dvd1.iso boots without issues and I got out a verbose dmesg from it to compare, but since this box has 8 GB RAM i386 is kinda out of the question... :) [I since realized that ppc_isa_attach in the backtrace belongs to the parallel port driver which is unused on this box so I was able to work around this issue by disabling the parallel port in the bios. But still I think this bug should be fixed...] Here comes the dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-HEAD-20090623-JPSNAP #0: Tue Jun 23 02:04:14 UTC 2009 root_at_build-i386-fbsd-2.allbsd.org:/usr/obj/i386/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1522000. Preloaded mfs_root "/boot/mfsroot" at 0xc152219c. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2812829239 Hz CPU: AMD Phenom(tm) II X4 920 Processor (2812.83-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x100f42 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> TSC: P-state invariant Data TLB: 48 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001825000 - 0x00000000cc741fff, 3404845056 bytes (831261 pages) avail memory = 3403403264 (3245 MB) Table 'FACP' at 0xcfee3040 Table 'SSDT' at 0xcfee8fc0 Table 'HPET' at 0xcfee9880 Table 'MCFG' at 0xcfee98c0 Table 'TAMG' at 0xcfee9900 Table 'APIC' at 0xcfee8f00 MADT: Found table at 0xcfee8f00 MP Configuration Table version 1.4 found at 0xc00f0f00 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 3: enabled SMP: Added CPU 3 (AP) ACPI APIC Table: <GBT GBTUACPI> INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 3 bios32: Found BIOS32 Service Directory header at 0xc00fb2d0 bios32: Entry = 0xfba20 (c00fba20) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xba50 pnpbios: Found PnP BIOS data at 0xc00fc2e0 pnpbios: Entry = f0000:c310 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xf6fe0 00014 (v0 GBT ) ACPI: RSDT 0xcfee3000 0003C (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 0xcfee3040 00074 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 0xcfee30c0 05E2B (v1 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 0xcfee0000 00040 ACPI: SSDT 0xcfee8fc0 0088C (v1 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 0xcfee9880 00038 (v1 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 0xcfee98c0 0003C (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 0xcfee9900 00302 (v1 GBT GBT B0 5455312E BG\^A\^A 53450101) ACPI: APIC 0xcfee8f00 00084 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: edge lapic3: LINT1 polarity: high ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jun 23 2009 02:02:44) npx0: INT 16 interface acpi0: <GBT GBTUACPI> on motherboard PCIe: Memory Mapped configuration base _at_ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6c0a000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfde0000 (3) failed ACPI timer: 1/2 1/2 1/1 1/1 1/1 1/2 1/2 1/2 1/2 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1002, dev=0x5957, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[1c]: type Memory, range 64, base 0xe0000000, size 29, enabled found-> vendor=0x1002, dev=0x5978, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x597d, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x597f, revid=0x00 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4390, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02c000, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe029000, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4385, revid=0x3a domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 2 messages map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfde00000-0xfdefffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x9498, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base 0xfdee0000, size 16, enabled pcib1: requested memory range 0xfdee0000-0xfdeeffff: good map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled pcib1: requested I/O range 0xee00-0xeeff: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0xaa38, revid=0x00 domain=0, bus=1, slot=0, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdefc000, size 14, enabled pcib1: requested memory range 0xfdefc000-0xfdefffff: good pcib1: matched entry for 1.0.INTB pcib1: slot 0 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1 pci1: <multimedia, HDA> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfdc00000-0xfdcfffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x10b9, revid=0x06 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfdde0000, size 17, enabled pcib2: requested memory range 0xfdde0000-0xfddfffff: good map[14]: type Memory, range 32, base 0xfddc0000, size 17, enabled pcib2: requested memory range 0xfddc0000-0xfdddffff: good map[18]: type I/O Port, range 32, base 0xdf00, size 5, enabled pcib2: requested I/O range 0xdf00-0xdf1f: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 19 em0: <Intel(R) PRO/1000 Network Connection 6.9.9> port 0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 19 at device 0.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000 em0: attempting to allocate 1 MSI vectors (1 supported) em0: using IRQ 256 for MSI em0: Using MSI interrupt msi: Assigning MSI IRQ 256 to local APIC 0 vector 49 em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:1b:21:34:ef:46 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfda00000-0xfdafffff pcib3: prefetched decode 0xfdf00000-0xfdffffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xce00, size 8, enabled pcib3: requested I/O range 0xce00-0xceff: in range map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled pcib3: requested memory range 0xfdfff000-0xfdffffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled pcib3: requested memory range 0xfdfe0000-0xfdfeffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000 re0: MSI count : 2 re0: attempting to allocate 1 MSI vectors (2 supported) re0: using IRQ 257 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:1f:d0:d7:4c:1b msi: Assigning MSI IRQ 257 to local APIC 0 vector 50 re0: [MPSAFE] re0: [FILTER] atapci0: <ATI IXP700/800 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 4ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=24ms ata2: software reset port 15... ata2: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata2: port is not ready (timeout 0ms) tfd = 000001d0 ata2: software reset clear timeout ata2: software reset port 0... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=183ms ata3: software reset port 15... ata3: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata3: port is not ready (timeout 0ms) tfd = 00000180 ata3: software reset clear timeout ata3: software reset port 0... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect time=0ms status=00000123 ata4: ready wait time=16ms ata4: software reset port 15... ata4: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata4: port is not ready (timeout 0ms) tfd = 000001d0 ata4: software reset clear timeout ata4: software reset port 0... ata4: ready wait time=0ms ata4: SIGNATURE: 00000101 ata4: AHCI reset done: devices=00000001 ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci3 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0xf8000000-0xfcffffff pcib4: prefetched decode 0xfdb00000-0xfdbfffff pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x14f1, dev=0x8800, revid=0x05 domain=0, bus=4, slot=6, func=0 class=04-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x37 (13750 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf9000000, size 24, enabled pcib4: requested memory range 0xf9000000-0xf9ffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8811, revid=0x05 domain=0, bus=4, slot=6, func=1 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8000000, size 24, enabled pcib4: requested memory range 0xf8000000-0xf8ffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8802, revid=0x05 domain=0, bus=4, slot=6, func=2 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x58 (22000 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfb000000, size 24, enabled pcib4: requested memory range 0xfb000000-0xfbffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8804, revid=0x05 domain=0, bus=4, slot=6, func=4 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib4: requested memory range 0xfa000000-0xfaffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x104c, dev=0x8024, revid=0x00 domain=0, bus=4, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcfff000, size 11, enabled pcib4: requested memory range 0xfcfff000-0xfcfff7ff: good map[14]: type Memory, range 32, base 0xfcff8000, size 14, enabled pcib4: requested memory range 0xfcff8000-0xfcffbfff: good pcib4: matched entry for 4.14.INTA pcib4: slot 14 INTA hardwired to IRQ 22 pci4: <multimedia, video> at device 6.0 (no driver attached) pci4: <multimedia> at device 6.1 (no driver attached) pci4: <multimedia> at device 6.2 (no driver attached) pci4: <multimedia> at device 6.4 (no driver attached) fwohci0: <Texas Instruments TSB43AB23> mem 0xfcfff000-0xfcfff7ff,0xfcff8000-0xfcffbfff irq 22 at device 14.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfcfff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:ef:de:f8:00:00:1f:d0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1ac4000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:ef:de:00:1f:d0 fwe0: bpf attached fwe0: Ethernet address: 02:ef:de:00:1f:d0 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:ef:de:f8:00:00:1f:d0 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6: <OHCI (generic) USB controller> on ohci4 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 uart0: [FILTER] uart0: fast interrupt ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 60 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 62 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 atrtc1: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc1: registered as a time-of-day clock (resolution 1000000us) cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: Warning: Couldn't map Interrupt. atrtc1: removed as time-of-day clock: clock atrtc has higher resolution atrtc0: registered as a time-of-day clock (resolution 1000000us) uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 214210 -> 100000 procfs registered lapic: Divisor 2, Frequency 100458198 hz Timecounter "TSC" frequency 2812829239 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata5: CONNECT requested firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 hptrr: no controller detected. ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus6: 12Mbps Full Speed USB v1.0 md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc10e87a0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ugen6.1: <ATI> at usbus6 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen0.1: <ATI> at usbus0 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 uhub0: 2 ports with 2 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: DISCONNECT requested ata5: reinit done .. ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 953868MB <Hitachi HDT721010SLA360 ST6OA31B> at ata2-master SATA300 ad4: 1953523055 sectors [1938018C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire ata3: device_reset timeout=120us uhub3: 6 ports with 6 removable, self powered uhub6: 6 ports with 6 removable, self powered acd0: <PIONEER DVD-RW DVR-216D/1.09> DVDR drive at ata3 as master acd0: read 17583KB/s (17583KB/s) write 5410KB/s (5410KB/s), 2000KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: DVD 120mm data disc ata4: Identifying devices: 00000001 ata4: New devices: 00000001 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: 953869MB <Hitachi HDT721010SLA360 ST6OA31B> at ata4-master SATA300 ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Silicon Image check3 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5: Identifying devices: 00000000 ata5: New devices: 00000000 GEOM: new disk ad4 GEOM: new disk ad8 ugen1.2: <HP> at usbus1 ata5: CONNECT requested ulpt0: <HP Officejet 7300 series, class 0/0, rev 2.00/1.00, addr 2> on usbus1 ulpt0: using bi-directional mode umass0: <HP Officejet 7300 series, class 0/0, rev 2.00/1.00, addr 2> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... GEOM: ad8: partition 1 does not start on a track boundary. GEOM: ad8: partition 1 does not end on a track boundary. GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s). umass0:1:0:-1: Attached to scbus1 ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: DISCONNECT requested ata5: reinit done .. (probe0:umass-sim0:0:0:0): error 22 (probe0:umass-sim0:0:0:0): Unretryable Error (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present Unretryable error (probe0:umass-sim0:0:0:0): error 6 (probe0:umass-sim0:0:0:0): Unretryable Error ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. GEOM: new disk da0 ATA PseudoRAID loaded (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <HP Officejet 7310 1.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <HP Officejet 7310 1.00> Removable Direct Access SCSI-2 device pass0: 1.000MB/s transfers SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48(da0: umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6ioapic0: routing intpin 6 ( ISA IRQ 6) to lapic 2 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 3 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 2 vector 49 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 3 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 3 vector 50 msi: Assigning MSI IRQ 256 to local APIC 1 vector 51 msi: Assigning MSI IRQ 257 to local APIC 2 vector 51 WARNING: WITNESS option enabled, expect reduced performance. (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 Trying to mount root from ufs:/dev/md0 ct_to_ts([2009-06-25 19:46:54]) = 1245959214.000000000 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done ..Received on Sun Jun 28 2009 - 08:25:08 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:50 UTC
