pmap_extract panic _at_boot (20090623-JPSNAP-amd64-dvd1.iso)

From: Juergen Lock <nox_at_jelal.kn-bremen.de>
Date: Thu, 25 Jun 2009 22:25:36 +0200
I wanted to try a head snapshot iso today and it failed to boot:
	http://people.freebsd.org/~nox/20090623-JPSNAP-amd64-bootpanic1.jpg
	http://people.freebsd.org/~nox/20090623-JPSNAP-amd64-bootpanic2.jpg
(I tried to get a serial console but couldn't get this box' serial
port working for some reason... ):

 As you can see in the jpegs it panic'd at pmap_extract+0x106, which
I _think_ is in line 963: (unfortunately there's no kernel.symbols on
the iso)
	pdep = pmap_pde(pmap, va);
(see
	http://fxr.watson.org/fxr/source/amd64/amd64/pmap.c#L963
), and that got invoked from isa_dmarangecheck+0x98:
	http://fxr.watson.org/fxr/source/amd64/isa/isa_dma.c#L374

 So, anyone have an idea what's up with this?  This box is running
7-stable/amd64 without major issues:
	FreeBSD triton.kn-bremen.de 7.2-STABLE FreeBSD 7.2-STABLE #0: Sun May 10 19:06:01 CEST 2009
(there are some usb problems which made me curious to try out the new usb
stack, and also k3b hangs on startup causing an irq storm on one cpu until
reboot, but this pmap_extract panic certainly is new.)  Also interestingly
the i386 snapshot from the same date,
	http://pub.allbsd.org/FreeBSD-snapshots/i386/8.0-HEAD-20090623-JPSNAP/cdrom/8.0-HEAD-20090623-JPSNAP-i386-dvd1.iso
boots without issues and I got out a verbose dmesg from it to compare, but
since this box has 8 GB RAM i386 is kinda out of the question... :)

 Here comes the dmesg:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-HEAD-20090623-JPSNAP #0: Tue Jun 23 02:04:14 UTC 2009
    root_at_build-i386-fbsd-2.allbsd.org:/usr/obj/i386/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1522000.
Preloaded mfs_root "/boot/mfsroot" at 0xc152219c.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2812829239 Hz
CPU: AMD Phenom(tm) II X4 920 Processor (2812.83-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f42  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  TSC: P-state invariant
Data TLB: 48 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001825000 - 0x00000000cc741fff, 3404845056 bytes (831261 pages)
avail memory = 3403403264 (3245 MB)
Table 'FACP' at 0xcfee3040
Table 'SSDT' at 0xcfee8fc0
Table 'HPET' at 0xcfee9880
Table 'MCFG' at 0xcfee98c0
Table 'TAMG' at 0xcfee9900
Table 'APIC' at 0xcfee8f00
MADT: Found table at 0xcfee8f00
MP Configuration Table version 1.4 found at 0xc00f0f00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
ACPI APIC Table: <GBT    GBTUACPI>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
bios32: Found BIOS32 Service Directory header at 0xc00fb2d0
bios32: Entry = 0xfba20 (c00fba20)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xba50
pnpbios: Found PnP BIOS data at 0xc00fc2e0
pnpbios: Entry = f0000:c310  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xf6fe0 00014 (v0 GBT   )
ACPI: RSDT 0xcfee3000 0003C (v1 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0xcfee3040 00074 (v1 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0xcfee30c0 05E2B (v1 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0xcfee0000 00040
ACPI: SSDT 0xcfee8fc0 0088C (v1 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 0xcfee9880 00038 (v1 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0xcfee98c0 0003C (v1 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 0xcfee9900 00302 (v1 GBT    GBT   B0 5455312E BG\^A\^A 53450101)
ACPI: APIC 0xcfee8f00 00084 (v1 GBT    GBTUACPI 42302E31 GBTU 01010101)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jun 23 2009 02:02:44)
npx0: INT 16 interface
acpi0: <GBT GBTUACPI> on motherboard
PCIe: Memory Mapped configuration base _at_ 0xe0000000
pcibios: BIOS version 3.00
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc6c0a000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfde0000 (3) failed
ACPI timer: 1/2 1/2 1/1 1/1 1/1 1/2 1/2 1/2 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11
  Validation          0  255   N     0  3 4 5 6 7 10 11
  After Disable       0  255   N     0  3 4 5 6 7 10 11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1002, dev=0x5957, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[1c]: type Memory, range 64, base 0xe0000000, size 29, enabled
found->	vendor=0x1002, dev=0x5978, revid=0x00
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x597d, revid=0x00
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x597f, revid=0x00
	domain=0, bus=0, slot=10, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x4390, revid=0x00
	domain=0, bus=0, slot=17, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xff00, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xfe00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xfd00, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xfc00, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xfb00, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=18, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4398, revid=0x00
	domain=0, bus=0, slot=18, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=18, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe02c000, size  8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x4398, revid=0x00
	domain=0, bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=19, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe029000, size  8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4385, revid=0x3a
	domain=0, bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x439c, revid=0x00
	domain=0, bus=0, slot=20, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	MSI supports 2 messages
	map[20]: type I/O Port, range 32, base 0xfa00, size  4, enabled
found->	vendor=0x1002, dev=0x4383, revid=0x00
	domain=0, bus=0, slot=20, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0410, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x439d, revid=0x00
	domain=0, bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4384, revid=0x00
	domain=0, bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4399, revid=0x00
	domain=0, bus=0, slot=20, func=5
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=24, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xfde00000-0xfdefffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x9498, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[18]: type Memory, range 64, base 0xfdee0000, size 16, enabled
pcib1: requested memory range 0xfdee0000-0xfdeeffff: good
	map[20]: type I/O Port, range 32, base 0xee00, size  8, enabled
pcib1: requested I/O range 0xee00-0xeeff: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0xaa38, revid=0x00
	domain=0, bus=1, slot=0, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfdefc000, size 14, enabled
pcib1: requested memory range 0xfdefc000-0xfdefffff: good
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xfdd00000-0xfddfffff
pcib2:   prefetched decode 0xfdc00000-0xfdcfffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x10b9, revid=0x06
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfdde0000, size 17, enabled
pcib2: requested memory range 0xfdde0000-0xfddfffff: good
	map[14]: type Memory, range 32, base 0xfddc0000, size 17, enabled
pcib2: requested memory range 0xfddc0000-0xfdddffff: good
	map[18]: type I/O Port, range 32, base 0xdf00, size  5, enabled
pcib2: requested I/O range 0xdf00-0xdf1f: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
em0: <Intel(R) PRO/1000 Network Connection 6.9.9> port 0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 19 at device 0.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
msi: Assigning MSI IRQ 256 to local APIC 0 vector 49
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1b:21:34:ef:46
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xfda00000-0xfdafffff
pcib3:   prefetched decode 0xfdf00000-0xfdffffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xce00, size  8, enabled
pcib3: requested I/O range 0xce00-0xceff: in range
	map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled
pcib3: requested memory range 0xfdfff000-0xfdffffff: good
	map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled
pcib3: requested memory range 0xfdfe0000-0xfdfeffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci3
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000
re0: MSI count : 2
re0: attempting to allocate 1 MSI vectors (2 supported)
re0: using IRQ 257 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:1f:d0:d7:4c:1b
msi: Assigning MSI IRQ 257 to local APIC 0 vector 50
re0: [MPSAFE]
re0: [FILTER]
atapci0: <ATI IXP700/800 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported
atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 4ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=0ms status=00000123
ata2: ready wait time=24ms
ata2: software reset port 15...
ata2: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001
ata2: port is not ready (timeout 0ms) tfd = 000001d0
ata2: software reset clear timeout
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: ready wait time=183ms
ata3: software reset port 15...
ata3: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001
ata3: port is not ready (timeout 0ms) tfd = 00000180
ata3: software reset clear timeout
ata3: software reset port 0...
ata3: ready wait time=0ms
ata3: SIGNATURE: eb140101
ata3: AHCI reset done: devices=00010000
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect time=0ms status=00000123
ata4: ready wait time=16ms
ata4: software reset port 15...
ata4: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001
ata4: port is not ready (timeout 0ms) tfd = 000001d0
ata4: software reset clear timeout
ata4: software reset port 0...
ata4: ready wait time=0ms
ata4: SIGNATURE: 00000101
ata4: AHCI reset done: devices=00000001
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
ohci2: [MPSAFE]
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
ohci3: [MPSAFE]
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xb000-0xbfff
pcib4:   memory decode     0xf8000000-0xfcffffff
pcib4:   prefetched decode 0xfdb00000-0xfdbfffff
pcib4:   Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x14f1, dev=0x8800, revid=0x05
	domain=0, bus=4, slot=6, func=0
	class=04-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x37 (13750 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf9000000, size 24, enabled
pcib4: requested memory range 0xf9000000-0xf9ffffff: good
pcib4: matched entry for 4.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x14f1, dev=0x8811, revid=0x05
	domain=0, bus=4, slot=6, func=1
	class=04-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf8000000, size 24, enabled
pcib4: requested memory range 0xf8000000-0xf8ffffff: good
pcib4: matched entry for 4.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x14f1, dev=0x8802, revid=0x05
	domain=0, bus=4, slot=6, func=2
	class=04-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x58 (22000 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfb000000, size 24, enabled
pcib4: requested memory range 0xfb000000-0xfbffffff: good
pcib4: matched entry for 4.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x14f1, dev=0x8804, revid=0x05
	domain=0, bus=4, slot=6, func=4
	class=04-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled
pcib4: requested memory range 0xfa000000-0xfaffffff: good
pcib4: matched entry for 4.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x104c, dev=0x8024, revid=0x00
	domain=0, bus=4, slot=14, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0210, cachelnsz=1 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfcfff000, size 11, enabled
pcib4: requested memory range 0xfcfff000-0xfcfff7ff: good
	map[14]: type Memory, range 32, base 0xfcff8000, size 14, enabled
pcib4: requested memory range 0xfcff8000-0xfcffbfff: good
pcib4: matched entry for 4.14.INTA
pcib4: slot 14 INTA hardwired to IRQ 22
pci4: <multimedia, video> at device 6.0 (no driver attached)
pci4: <multimedia> at device 6.1 (no driver attached)
pci4: <multimedia> at device 6.2 (no driver attached)
pci4: <multimedia> at device 6.4 (no driver attached)
fwohci0: <Texas Instruments TSB43AB23> mem 0xfcfff000-0xfcfff7ff,0xfcff8000-0xfcffbfff irq 22 at device 14.0 on pci4
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfcfff000
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:ef:de:f8:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1ac4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:ef:de:00:1f:d0
fwe0: bpf attached
fwe0: Ethernet address: 02:ef:de:00:1f:d0
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:ef:de:f8:00:00:1f:d0 _at_ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000
ohci4: [MPSAFE]
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59
uart0: [FILTER]
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP ECP  ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 60
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 62
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
atrtc1: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc1: registered as a time-of-day clock (resolution 1000000us)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: Warning: Couldn't map Interrupt.
atrtc1: removed as time-of-day clock: clock atrtc has higher resolution
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 214210 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100458198 hz
Timecounter "TSC" frequency 2812829239 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata5: CONNECT requested
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
hptrr: no controller detected.
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus6: 12Mbps Full Speed USB v1.0
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc10e87a0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ugen6.1: <ATI> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen0.1: <ATI> at usbus0
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: DISCONNECT requested
ata5: reinit done ..
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 953868MB <Hitachi HDT721010SLA360 ST6OA31B> at ata2-master SATA300
ad4: 1953523055 sectors [1938018C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00010000
ata3: New devices: 00010000
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
ata3: device_reset timeout=120us
uhub3: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
acd0: <PIONEER DVD-RW DVR-216D/1.09> DVDR drive at ata3 as master
acd0: read 17583KB/s (17583KB/s) write 5410KB/s (5410KB/s), 2000KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: DVD 120mm data disc
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 953869MB <Hitachi HDT721010SLA360 ST6OA31B> at ata4-master SATA300
ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad8: Silicon Image check3 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
GEOM: new disk ad4
GEOM: new disk ad8
ugen1.2: <HP> at usbus1
ata5: CONNECT requested
ulpt0: <HP Officejet 7300 series, class 0/0, rev 2.00/1.00, addr 2> on usbus1
ulpt0: using bi-directional mode
umass0: <HP Officejet 7300 series, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
GEOM: ad8: partition 1 does not start on a track boundary.
GEOM: ad8: partition 1 does not end on a track boundary.
GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s).
umass0:1:0:-1: Attached to scbus1
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: DISCONNECT requested
ata5: reinit done ..
(probe0:umass-sim0:0:0:0): error 22
(probe0:umass-sim0:0:0:0): Unretryable Error
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
Unretryable error
(probe0:umass-sim0:0:0:0): error 6
(probe0:umass-sim0:0:0:0): Unretryable Error
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
GEOM: new disk da0
ATA PseudoRAID loaded
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HP Officejet 7310 1.00> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <HP Officejet 7310 1.00> Removable Direct Access SCSI-2 device 
pass0: 1.000MB/s transfers
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48(da0:
umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6ioapic0: routing intpin 6 (
ISA IRQ 6) to lapic 2 vector 48
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 3 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 2 vector 49
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 3 vector 49
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 50
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 3 vector 50
msi: Assigning MSI IRQ 256 to local APIC 1 vector 51
msi: Assigning MSI IRQ 257 to local APIC 2 vector 51
WARNING: WITNESS option enabled, expect reduced performance.
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/md0
ct_to_ts([2009-06-25 19:46:54]) = 1245959214.000000000
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000001
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: CONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
ata5: DISCONNECT requested
ata5: reiniting channel ..
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: reinit done ..
Received on Thu Jun 25 2009 - 18:29:51 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:50 UTC