ata cable on CURRENT

From: barbara <barbara.xxx1975_at_libero.it>
Date: Mon, 29 Jun 2009 19:06:23 +0200
Hi,
sorry for asking again but nothing changed in the meanwhile.

# uname -a
FreeBSD satanasso.local.net 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Feb 21 05:58:23 CEST 2009 root at satanasso.local.net:/usr/obj/usr/src/sys/SATANASSO i386


In my dmesg I have:
atapci2: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
...
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 152627MB <MAXTOR STM3160212A 3.AAJ> at ata0-master UDMA33
...
ad1: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata0-slave UDMA133

# atacontrol info ata0
Master: ad0 <MAXTOR STM3160212A/3.AAJ> ATA/ATAPI revision 7
Slave: ad1 <Maxtor 6Y120L0/YAR41BW0> ATA/ATAPI revision 7

So, if ad0 and ad1 are both attached with the same cable, why ad0 should be limited while ad1 is not?

On 7-STABLE, I have:
ad0: 152627MB <MAXTOR STM3160212A 3.AAJ> at ata0-master UDMA100
which seems correct.

I've also replaced the cable with a brand new one, with the same results.
So, what's wrong?
Anyone knows what could be the problem?

I wonder if I should be worried about my HW.

Thanks
Barbara
Received on Mon Jun 29 2009 - 15:06:25 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:50 UTC