On Sat, 28 Feb 2009, Alexander Motin wrote: > Sam Leffler wrote: >> Sam Leffler wrote: >>> Sam Leffler wrote: >>>> HEAD _at_ r189170 fails to boot on a T41. Two cd/dvd drivers are recognized >>>> (only 1 exists) and I get complaints of the form (and transcribed): >>>> >>>> acd1: WARNING - ATAPI_IDENTIFY taskqueue timeout - completing request >>>> directory >>>> >>>> (similarly for acd0) until there's a panic: >>>> >>>> panic: mtx_lock() of destroy mutex _at_ .../../../kern_sema.c:79 >>>> >>>> (stack trace uninteresting). >>>> >>> >>> boot -v shows: >>> >>> acd0: setting PIO4 on CH4 chip >>> acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - ... >>> acd0: setting UDMA32 on ICH4 chip >>> ata1: Identifying devices: 00030000 >>> ata: New devices: 00000000 >>> ata1: reinit done .. >>> panic ... >> reverting r189166 gets me a bootable kernel. > > Looks like while fixing small problems I have found bigger ones. Try please > this patch against HEAD, it reverts r189166, r189091 and partially r188903: > > http://people.freebsd.org/~mav/ata.rollback.patch > > If it works, I will stop for some time to cool down and search for better > solution. With the 189195 version from csup, I get all sorts of timeouts from my ATA drives in ahci mode. Kernel from: FreeBSD borg.lerctr.org 8.0-CURRENT FreeBSD 8.0-CURRENT #3: Mon Feb 9 10:21:36 CST 2009 root_at_borg.lerctr.org:/usr/obj/usr/src/sys/BORG amd64 works, the current (as of this writing) sources do NOT. Ideas on what to get? dmesg from the running kernel: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #3: Mon Feb 9 10:21:36 CST 2009 root_at_borg.lerctr.org:/usr/obj/usr/src/sys/BORG Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5120 _at_ 1.86GHz (1862.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant Cores per package: 2 usable memory = 4283305984 (4084 MB) avail memory = 4120276992 (3929 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 smbios0: <System Management BIOS> at iomem 0xf60c0-0xf60de on motherboard smbios0: Version: 2.5 cryptosoft0: <software crypto> on motherboard acpi0: <SMCI SMCISLP2> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f mem 0xd8000000-0xd801ffff irq 18 at device 0.0 on pci6 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:30:48:8e:9f:f3 em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f mem 0xd8020000-0xd803ffff irq 19 at device 0.1 on pci6 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:30:48:8e:9f:f2 pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pci0: <base peripheral> at device 8.0 (no driver attached) pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci10: <ACPI PCI bus> on pcib10 uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 17 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8500400-0xd85007ff irq 17 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered ums0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on uhub3 ums0: 3 buttons and Z dir. ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on uhub3 kbd2 at ukbd0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel AHCI controller> port 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem 0xd8500800-0xd8500bff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 6 ports PM supported ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci1 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci1 ata7: [ITHREAD] ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port 0x1100-0x111f irq 19 at device 31.3 on pci0 ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 ipmi0: <IPMI System Interface> on isa0 ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec ZFS filesystem version 13 ZFS storage pool version 13 acd0: DMA limited to UDMA33, controller found non-ATA66 cable acd0: DVDR <Memorex DVD+-RAM 510L v1/MWS7> at ata0-master UDMA33 ad4: 381554MB <Seagate ST3400620AS 3.AAJ> at ata2-master SATA300 ad6: 381554MB <Seagate ST3400620AS 3.AAJ> at ata3-master SATA300 ad8: 476940MB <Seagate ST3500630AS 3.AAE> at ata4-master SATA300 ad10: 381554MB <Seagate ST3400620AS 3.AAJ> at ata5-master SATA300 ad12: 381554MB <Seagate ST3400620AS 3.AAJ> at ata6-master SATA300 ad14: 381554MB <Seagate ST3400620AS 3.AAJ> at ata7-master SATA300 ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0 ipmi0: Number of channels 8 ipmi0: Attached watchdog SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). Trying to mount root from ufs:/dev/ad4s1a acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): CAM Status: SCSI Status Error (probe0:ata0:0:0:0): SCSI Status: Check Condition (probe0:ata0:0:0:0): NOT READY asc:3a,0 (probe0:ata0:0:0:0): Medium not present (probe0:ata0:0:0:0): Unretryable error cd0 at ata0 bus 0 target 0 lun 0 cd0: <Memorex DVD+-RAM 510L v1 MWS7> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present em0: link state changed to UP > -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683 E-Mail: ler_at_lerctr.org US Mail: 430 Valona Loop, Round Rock, TX 78681-3893Received on Sun Mar 01 2009 - 07:52:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:42 UTC