Try report: Sony VAIO Type P

From: Yoshifumi SASAKI <sasaki_at_ongs.co.jp>
Date: Tue, 10 Mar 2009 17:33:02 +0900
Hi current folks, I have tried Sony VAIO Type P.
Reporting TypeP situation JFYI.

uname -a:

FreeBSD usb.ongs.co.jp 8.0-HEAD-20090223-JPSNAP FreeBSD
8.0-HEAD-20090223-JPSNAP #3: Thu Mar  5 10:02:43 JST 2009
root_at_usb.ongs.co.jp:/usr/obj/usr/src/sys/VAIOTYPEP  i386

dmesg:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-HEAD-20090223-JPSNAP #3: Thu Mar  5 10:02:43 JST 2009
     root_at_usb.ongs.co.jp:/usr/obj/usr/src/sys/VAIOTYPEP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU Z520   _at_ 1.33GHz (1419.94-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x106c2  Stepping = 2

Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x40c3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,xTPR,PDCM,<b22>>
   AMD Features=0x100000<NX>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
   Logical CPUs per core: 2
real memory  = 2137317376 (2038 MB)
avail memory = 2083287040 (1986 MB)
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
kbd1 at kbdmux0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x6070-0x6077 mem
0x94200000-0x9427ffff,0x80000000-0x8fffffff,0x94280000-0x942bffff irq 11
at device 2.0 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> irq 10 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x6040-0x605f irq 11 at
device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0000
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x6020-0x603f irq 10 at
device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0000
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x6000-0x601f irq 7 at
device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0000
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x942c4000-0x942c43ff irq
5 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: waiting for BIOS to give up control
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6060-0x606f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6080a1f06000a1f
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: parallel port not found.
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 1419941530 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad0: 57231MB <TOSHIBA MK6028GAL BN101A> at ata0-master UDMA33
ugen0.1: <Intel> at usbus0
ushub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
ushub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
GEOM: ad0: partition 2 does not start on a track boundary.
GEOM: ad0: partition 2 does not end on a track boundary.
GEOM: ad0: partition 1 does not start on a track boundary.
GEOM: ad0: partition 1 does not end on a track boundary.
GEOM_LABEL: Label for provider ad0s1 is ntfs/Recovery.
GEOM: ad0s2: geometry does not match label (255h,63s != 16h,63s).

WORK:
   X.Org 7.4 work.

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
         ### Available Driver options are:-
         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
         ### [arg]: arg optional
         #Option     "ShadowFB"           	# [<bool>]
         #Option     "DefaultRefresh"     	# [<bool>]
         #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card0"
	Driver      "vesa"
	VendorName  "Intel Corporation"
	BoardName   "System Controller Hub (SCH Poulsbo) Graphics Controller"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
  		Viewport   0 0
		Depth     24
	EndSubSection
EndSection


NOT WORK:
   Wireless LAN...atheros 928x not work.
   I have tried NDIS.I succeed NDIS driver.

no match for ZwOpenKey
no match for ZwDeleteKye
no match for IoOpenDeviceRegistryKey
no match for ZwCreateKey
ndis0: <Atheros AR928X Wireless Network Adapter>mem0x92000000-0x9200ffff
irq 11 at device 0.0 on pci2
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
NDIS: open file /compat/ndis/AW1012d.ini failed: 2
NDIS: open file /compat/ndis/regAdd.txt failed: 2

    I receive many messages.And not work.

interrupt storm detected on "irq10:"; throttling interrupt source
interrupt storm detected on "irq10:"; throttling interrupt source
interrupt storm detected on "irq10:"; throttling interrupt source
interrupt storm detected on "irq10:"; throttling interrupt source
...
...
...

ifconfig:

ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:23:4d:df:bf:5a
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
	status: associated
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet6 ::1 prefixlen 128
	inet 127.0.0.1 netmask 0xff000000
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 00:23:4d:df:bf:5a
	inet 192.168.1.25 netmask 0xffffff00 broadcast 192.168.1.255
	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
	status: no carrier
	ssid "" channel 1 (2412 Mhz 11g)
	country US authmode OPEN privacy OFF txpower 0 bmiss 7 mcastrate 6
	mgmtrate 6 scanvalid 60 protmode CTS bintval 0

   Sound... succeed to load snd_hda.ko

hdac0: <Intel SCH High Definition Audio Controller> mem
0x942c0000-0x942c3fff irq 11 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090215_0128
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Realtek ALC262
pcm0: <HDA Realtek ALC262 PCM #0 Analog> at cad 0 nid 1 on hdac0

   I receive many messages.And I try to play MP3 data,But not sound.

interrupt storm detected on "irq5:"; throttling interrupt source
interrupt storm detected on "irq5:"; throttling interrupt source
interrupt storm detected on "irq5:"; throttling interrupt source
interrupt storm detected on "irq5:"; throttling interrupt source
...
...
...

# madplay MP3data
pcm0:virtual:dsp0.vp0: play interrupt timeout, channel dead


   USB memory....default is not work.

usb2_alloc_device:1401: set address 2 failed (ignored)
usb2_alloc_device:1437: getting device descriptor at addr 2 failed!
usb2_req_re_enumerate:1409: addr=2, set address failed! (ignored)
usb2_req_re_enumerate:1422: getting device descriptor at addr 2 failed!
usb2_req_re_enumerate:1409: addr=2, set address failed! (ignored)
usb2_req_re_enumerate:1422: getting device descriptor at addr 2 failed!
ugen3.2: <> at usbus3 (disconnected)
uhub_reattach_port:414: could not allocate new device!

    But it work, when I load snd_hda.ko.

ugen3.4: <JetFlash> at usbus3
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 4>
on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash TS1GJFV20 8.07> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 969MB (1986558 512 byte sectors: 64H 32S/T 969C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
GEOM: da0s1: geometry does not match label (255h,63s != 64h,32s)


Anyone has any ideas?
Thanks

--
   Yoshifumi SASAKI, ONGS Inc.
Received on Tue Mar 10 2009 - 07:52:38 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:43 UTC