At 05:50 AM 3/21/2009, Alexander Motin wrote: >Mike Tancsa wrote: >>Has anyone been able to get this port working ? The BIOS sees the >>disk, but the driver does not > >I would recommend you to start from switching SATA from legacy >emulation into native AHCI mode in BIOS. > >If it does not succeed, try verbose dmesg, it will give some more >info about drive detection process on AHCI. Hi, I turned it on, but still no luck. Attached is the verbose dmesg.boot. I wonder if the extra controller is being mis-identified as being PATA ? As far as I can tell, there are no legacy PATA connectors on the board Yet atapci0: <Marvell 88SX6121 UDMA133 controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0xe1100000-0xe11003ff irq 16 at device 0.0 on pci6 implies its a PATA device ? ---Mike
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:44 UTC