On Sun, 2009-03-22 at 22:03 +0300, Alex Keda wrote: > Robert Noland пишет: > > On Sun, 2009-03-22 at 21:06 +0300, Alex Keda wrote: > >> Robert Noland пишет: > >>> On Sun, 2009-03-22 at 17:26 +0300, Alex Keda wrote: > >>>> (II) RADEON(0): XAA Render acceleration unsupported on Radeon > >>>> 9500/9700 and newer. Please use EXA instead. > >>> Everything looks like it's ok, except that you should be using EXA. > >>> > >>> Option "AccelMethod" "EXA" > >> I'm not using Xorg.conf - I always start without it - all work OK. > >> X-system by oneself configure all parameters. > >> > >>> What was the last working kernel? > >> FreeBSD HP.lissyara.su 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Mar 14 > >> 19:08:30 MSK 2009 > >> lissyara_at_HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC amd64 > >> > >> >Actually, It looks like maybe it is waiting on hald? Did you just > >> switch to usb2? > >> Yes, I use GENERIC. But, old kernel with new USB stack and work correct. > > > > Please make sure that hald is running and that lshal shows you mouse and > > keyboard before we go digging any further. > it show my mouse, my keyboard and my touchpad > > > The rs690 is picky about how the gart is allocated, but I had the flags > > to bus_dmamem applied incorrectly. It should not have caused an issue > > and all of the allocations look to be correct. > > > > You should probably not be running configless on this chip, as the > > defaults are not optimum for it. > I remove drm.ko and radeon.ko from /boot/kernel and copy it from > /boot/kernel.old > With new kernel and old modules - all work excellent. Ok, after a little discussion and looking at the bus_dma code... The documentation is incorrect. I'll fix this up shortly... robert. -- Robert Noland <rnoland_at_FreeBSD.org> FreeBSD
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:44 UTC