On Wed, 2009-03-25 at 08:46 +0800, wsk wrote: > Robert Noland wrote: > > On Tue, 2009-03-24 at 12:19 +0800, wsk wrote: > > > >> Robert Noland wrote: > >> > >>> On Mon, 2009-03-23 at 09:28 +0800, wsk wrote: > >>> > >>> > >>>>> Ok, this patch should work on NV50 chips also. > >>>>> > >>>>> What you get is EXA and Xv. > >>>>> > >>>>> You still need: > >>>>> > >>>>> A recent -CURRENT or -STABLE. > >>>>> > >>>>> git master of libdrm and xf86-video-nouveau. > >>>>> > >>>>> This patch. > >>>>> > >>>>> Things I've figured out since the last patch... > >>>>> > >>>>> On NV50 class hardware you need to have a compositing manager running > >>>>> for Xv to work. That means xcompmgr, metacity with composite enabled, > >>>>> xfce (rumored to work as well, haven't tried). If your running Gnome > >>>>> with metacity, open gconf-editor and go to apps->metacity->general and > >>>>> check the composite box. > >>>>> > >>>>> On NV40 class hardware, you don't need the composite manager. In fact > >>>>> (at least with Xserver 1.6 which I'm running now), if a composite > >>>>> manager is enabled, I'm seeing high cpu utilization from Xorg under some > >>>>> circumstances. I don't think this is a drm issue, but still an issue. > >>>>> For me, if I start a video using mplayer in an xterm, cpu is fine as > >>>>> long as that xterm is the foreground window. If it is not the > >>>>> foreground window, even if it isn't obscured I see the cpu utilization. > >>>>> Disabling the composite manager makes everything fine. > >>>>> > >>>>> http://people.freebsd.org/~rnoland/drm-nouveau-032109.patch <http://people.freebsd.org/%7Ernoland/drm-nouveau-032109.patch> > >>>>> > >>>>> robert. > >>>>> > >>>>> > >>>> get the following errors and exitThis is a pre-release version of the X server from The X.Org Foundation. > >>>> It is not supported in any way. > >>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. > >>>> Select the "xorg" product for bugs you find in this release. > >>>> Before reporting bugs in pre-release versions please check the > >>>> latest version in the X.Org Foundation git repository. > >>>> See http://wiki.x.org/wiki/GitPage for git access instructions. > >>>> > >>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2) > >>>> Release Date: 2009-1-30 > >>>> X Protocol Version 11, Revision 0 > >>>> Build Operating System: FreeBSD 7.1-STABLE amd64 > >>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRE > >>>> RELEASE #2: Sun Mar 22 19:44:23 CST 2009 wsk_at_lp.gddsn.org.cn:/usr/obj/usr/sr > >>>> c/sys/WSK amd64 > >>>> Build Date: 06 February 2009 04:22:44PM > >>>> > >>>> Before reporting problems, check http://wiki.x.org > >>>> to make sure that you have the latest version. > >>>> Markers: (--) probed, (**) from config file, (==) default setting, > >>>> (++) from command line, (!!) notice, (II) informational, > >>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > >>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009 > >>>> ing config file: "xorg.conf1" > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 > >>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >>>> drm0: [ITHREAD] > >>>> info: [drm] Allocating FIFO number 1 > >>>> info: [drm] nouveau_fifo_alloc: initialised FIFO 1 > >>>> info: [drm] PFIFO_DMA_PUSHER - Ch 1 > >>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space > >>>> (EE) Screen(s) found, but none have a usable configuration. > >>>> > >>>> Fatal server error: > >>>> no screens found > >>>> > >>>> Please consult the The X.Org Foundation support > >>>> at http://wiki.x.org > >>>> for help. > >>>> Please also check the log file at "/var/log/Xorg.0.log" for additional informati > >>>> on. > >>>> > >>>> info: [drm] nouveau_fifo_free: freeing fifo 1 > >>>> error: [drm:pid30722:nouveau_fifo_free] *ERROR* Failed to idle channel 1 before > >>>> destroy.Prepare for strangeness.. > >>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >>>> > >>>> what can i do ? > >>>> > >>>> > >>>> > >>>> > >>>> plain text document attachment (Xorg.0.log) > >>>> This is a pre-release version of the X server from The X.Org Foundation. > >>>> It is not supported in any way. > >>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. > >>>> Select the "xorg" product for bugs you find in this release. > >>>> Before reporting bugs in pre-release versions please check the > >>>> latest version in the X.Org Foundation git repository. > >>>> See http://wiki.x.org/wiki/GitPage for git access instructions. > >>>> > >>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2) > >>>> Release Date: 2009-1-30 > >>>> X Protocol Version 11, Revision 0 > >>>> Build Operating System: FreeBSD 7.1-STABLE amd64 > >>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #2: Sun Mar 22 19:44:23 CST 2009 wsk_at_lp.gddsn.org.cn:/usr/obj/usr/src/sys/WSK amd64 > >>>> Build Date: 06 February 2009 04:22:44PM > >>>> > >>>> Before reporting problems, check http://wiki.x.org > >>>> to make sure that you have the latest version. > >>>> Markers: (--) probed, (**) from config file, (==) default setting, > >>>> (++) from command line, (!!) notice, (II) informational, > >>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > >>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009 > >>>> (++) Using config file: "xorg.conf1" > >>>> (==) No Layout section. Using the first Screen section. > >>>> (==) No screen section available. Using defaults. > >>>> (**) |-->Screen "Default Screen Section" (0) > >>>> (**) | |-->Monitor "<default monitor>" > >>>> (==) No device specified for screen "Default Screen Section". > >>>> Using the first device section listed. > >>>> (**) | |-->Device "Card0" > >>>> (==) No monitor specified for screen "Default Screen Section". > >>>> Using a default monitor configuration. > >>>> (==) Automatically adding devices > >>>> (==) Automatically enabling devices > >>>> (==) No FontPath specified. Using compiled-in default. > >>>> (==) FontPath set to: > >>>> built-ins > >>>> (==) ModulePath set to "/usr/local/lib/xorg/modules" > >>>> (II) Cannot locate a core pointer device. > >>>> (II) Cannot locate a core keyboard device. > >>>> (II) The server relies on HAL to provide the list of input devices. > >>>> If no devices become available, reconfigure HAL or disable AllowEmptyInput. > >>>> (II) Loader magic: 0xb20 > >>>> (II) Module ABI versions: > >>>> X.Org ANSI C Emulation: 0.4 > >>>> X.Org Video Driver: 5.0 > >>>> X.Org XInput driver : 4.0 > >>>> X.Org Server Extension : 2.0 > >>>> (II) Loader running on freebsd > >>>> (--) Using syscons driver with X support (version 2.0) > >>>> (--) using VT number 9 > >>>> > >>>> (--) PCI:*(0_at_1:0:0) nVidia Corporation Quadro NVS 140M rev 161, Mem _at_ 0xfd000000/16777216, 0x00000000/268435456, 0xfa000000/33554432, I/O _at_ 0x0000df00/128, BIOS _at_ 0x????????/65536 > >>>> > >>>> > >>> Ok, thats a new one... > >>> > >>> > >>> > >>>> (II) System resource ranges: > >>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > >>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > >>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > >>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > >>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > >>>> (II) LoadModule: "extmod" > >>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > >>>> (II) Module extmod: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.0.0 > >>>> Module class: X.Org Server Extension > >>>> ABI class: X.Org Server Extension, version 2.0 > >>>> (II) Loading extension MIT-SCREEN-SAVER > >>>> (II) Loading extension XFree86-VidModeExtension > >>>> (II) Loading extension XFree86-DGA > >>>> (II) Loading extension DPMS > >>>> (II) Loading extension XVideo > >>>> (II) Loading extension XVideo-MotionCompensation > >>>> (II) Loading extension X-Resource > >>>> (II) LoadModule: "dbe" > >>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > >>>> (II) Module dbe: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.0.0 > >>>> Module class: X.Org Server Extension > >>>> ABI class: X.Org Server Extension, version 2.0 > >>>> (II) Loading extension DOUBLE-BUFFER > >>>> (II) LoadModule: "glx" > >>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > >>>> (II) Module glx: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.0.0 > >>>> ABI class: X.Org Server Extension, version 2.0 > >>>> (==) AIGLX disabled > >>>> (==) Exporting typical set of GLX visuals > >>>> (II) Loading extension GLX > >>>> (II) LoadModule: "record" > >>>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > >>>> (II) Module record: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.13.0 > >>>> Module class: X.Org Server Extension > >>>> ABI class: X.Org Server Extension, version 2.0 > >>>> (II) Loading extension RECORD > >>>> (II) LoadModule: "dri" > >>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > >>>> (II) Module dri: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.0.0 > >>>> ABI class: X.Org Server Extension, version 2.0 > >>>> (II) Loading extension XFree86-DRI > >>>> (II) LoadModule: "nouveau" > >>>> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so > >>>> (II) Module nouveau: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 0.0.10 > >>>> Module class: X.Org Video Driver > >>>> ABI class: X.Org Video Driver, version 5.0 > >>>> (II) NOUVEAU driver Date: Wed Mar 18 09:36:33 2009 +1000 > >>>> (II) NOUVEAU driver for NVIDIA chipset families : > >>>> RIVA TNT (NV04) > >>>> RIVA TNT2 (NV05) > >>>> GeForce 256 (NV10) > >>>> GeForce 2 (NV11, NV15) > >>>> GeForce 4MX (NV17, NV18) > >>>> GeForce 3 (NV20) > >>>> GeForce 4Ti (NV25, NV28) > >>>> GeForce FX (NV3x) > >>>> GeForce 6 (NV4x) > >>>> GeForce 7 (G7x) > >>>> GeForce 8 (G8x) > >>>> (II) Primary Device is: PCI 01_at_00:00:0 > >>>> (II) resource ranges after probing: > >>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > >>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > >>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > >>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > >>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > >>>> (--) NOUVEAU(0): Chipset: "NVIDIA NV86" > >>>> > >>>> > >>> Hrm, NV86... I'll have to ask around about that. Meanwhile can you send > >>> me a pciconf -lvb which should at least show us the BAR configuration. > >>> > >>> Ok, my sources are telling me that this should work and that it is an > >>> NV50, or at least should work the same... > >>> > >>> Also, just to be safe, please rebuild/reinstall devel/libpciaccess. I'm > >>> not sure if it may be trashing the BARs somehow. > >>> > >>> robert. > >>> > >>> > >> bar [24] = type I/O Port, range 32, base 0xeff0, size 16, enabled > >> ichsmb0_at_pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 > >> rev=0x02 hdr=0x00 > >> vendor = 'Intel Corporation' > >> device = '82801H (ICH8 Family) SMBus Controller' > >> class = serial bus > >> subclass = SMBus > >> bar [10] = type Memory, range 32, base 0xfebfbf00, size 256, enabled > >> bar [20] = type I/O Port, range 32, base 0x10c0, size 32, enabled > >> vgapci0_at_pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de > >> rev=0xa1 hdr=0x00 > >> vendor = 'Nvidia Corp' > >> device = 'Unknown nVidia Quadro FX 570M' > >> class = display > >> subclass = VGA > >> bar [10] = type Memory, range 32, base 0xfd000000, size 16777216, enabled > >> > > > > Ok, this is BAR 0, BARs 1 and 2 are indeed are not showing up. BAR 1 > > should be your framebuffer and should be where most of your memory is. > > (This is the memory the tell you about when you buy the card, 256M, > > 512M, etc.) It should probably be a 64bit BAR, which is why BAR 2 isn't > > there. We are going to need more details on your card... > > > indeed,my DELL D830 laptop video card is Quadro NVS 140M with 256M memory. > but it recognized Quadro FX 570M with pciconfig. So, the nouveau folks want me to get you to either boot linux and see what lspci shows for this card, or at least install the lspci port and see what it says. I don't think it is going to reveal anything, but who knows... This is not a driver issue at this point, the BARs just don't appear to be present. robert. > > > >> bar [1c] = type Memory, range 64, base 0xfa000000, size 33554432, enabled > >> > > > > This one is BAR 3, which is used when it doesn't find BAR 1. > > > > robert. > > > > > >> bar [24] = type I/O Port, range 32, base 0xdf00, size 128, enabled > >> ndis0_at_pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4 > >> rev=0x03 hdr=0x00 > >> vendor = 'Broadcom Corporation' > >> device = 'BCM94321KFBG Broadcom 4321AGN 802.11a/b/g/draft-n Wi-Fi Solution' > >> class = network > >> bar [10] = type Memory, range 64, base 0xf9ffc000, size 16384, enabled > >> bar [18] = type Prefetchable Memory, range 64, base 0xf0000000, size > >> 1048576, enabled > >> bge0_at_pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 > >> hdr=0x00 > >> vendor = 'Broadcom Corporation' > >> device = 'B57xx Broadcom NetXtreme Gigabit Ethernet' > >> class = network > >> subclass = ethernet > >> bar [10] = type Memory, range 64, base 0xf9bf0000, size 65536, enabled > >> cbb0_at_pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 > >> hdr=0x02 > >> vendor = 'O2 Micro Inc' > >> device = 'OZ711EZ1 MemoryCardBus Controller' > >> class = bridge > >> subclass = PCI-CardBus > >> bar [10] = type Memory, range 32, base 0xf9a00000, size 4096, enabled > >> fwohci0_at_pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217 > >> rev=0x02 hdr=0x00 > >> vendor = 'O2 Micro Inc' > >> device = '0x00f71217 1394 Open Host Controller Interface' > >> class = serial bus > >> subclass = FireWire > >> bar [10] = type Memory, range 32, base 0xf9aff000, size 4096, enabled > >> bar [14] = type Memory, range 32, base 0xf9afe800, size 2048, enabled > >> > >> and follow your intrudction.still pain me :( > >> > >> (++) Using config file: "xorg.conf1" > >> drm0: <NVidia Display Adapter> on vgapci0 > >> info: [drm] Detected an NV50 generation card (0x086900a2) > >> vgapci0: child drm0 requested pci_enable_busmaster > >> info: [drm] Initialized nouveau 0.0.12 20060213 > >> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 > >> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >> drm0: [ITHREAD] > >> info: [drm] Allocating FIFO number 1 > >> error: [drm:pid6494:nouveau_graph_trapped_channel] *ERROR* AIII, > >> invalid/inactiv > >> e channel id 128 > >> info: [drm] PGRAPH_ERROR - nSource:info: [drm] PROTECTION_ERRORinfo: > >> [drm] , nSt > >> atus:info: [drm] > >> info: [drm] PGRAPH_ERROR - Ch -1/0 Class 0x0000 Mthd 0x0000 Data > >> 0x00000000:0x00 > >> 000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 1: > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408900: 0x8000003f > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408904: 0xcf6f7f0e > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408908: 0xfff7367f > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040890c: 0x00001850 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408910: 0xafff3587 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e08: 0x800b6fad > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e0c: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e10: 0x4df4fd60 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e14: 0x000000d7 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e18: 0x3139768d > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e1c: 0xf6d69757 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e20: 0x63161650 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e24: 0x07220009 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 2: > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409900: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409904: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409908: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040990c: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409910: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e08: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e0c: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e10: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e14: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e1c: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e20: 0x00000000 > >> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e24: 0x00000000 > >> info: [drm] nouveau_fifo_alloc: initialised FIFO 1 > >> info: [drm] PFIFO_DMA_PUSHER - Ch 1 > >> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space > >> (EE) Screen(s) found, but none have a usable configuration. > >> > >> Fatal server error: > >> no screens found > >> > >> Please consult the The X.Org Foundation support > >> at http://wiki.x.org > >> for help. > >> Please also check the log file at "/var/log/Xorg.0.log" for additional > >> informati > >> on. > >> > >> info: [drm] nouveau_fifo_free: freeing fifo 1 > >> error: [drm:pid6493:nouveau_fifo_free] *ERROR* Failed to idle channel 1 > >> before d > >> estroy.Prepare for strangeness.. > >> info: [drm] PFIFO_DMA_PUSHER - Ch 127 > >> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). > >> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 > >> > >> > >>> > >>> > >>>> (II) Loading sub module "int10" > >>>> (II) LoadModule: "int10" > >>>> (II) Loading /usr/local/lib/xorg/modules//libint10.so > >>>> (II) Module int10: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 1.0.0 > >>>> ABI class: X.Org Video Driver, version 5.0 > >>>> (II) NOUVEAU(0): Initializing int10 > >>>> (==) NOUVEAU(0): Write-combining range (0xa0000,0x20000) was already clear > >>>> (==) NOUVEAU(0): Write-combining range (0xc0000,0x40000) was already clear > >>>> (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000 > >>>> (==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear > >>>> drmOpenDevice: node name is /dev/dri/card0 > >>>> drmOpenDevice: open result is 10, (OK) > >>>> drmOpenDevice: node name is /dev/dri/card0 > >>>> drmOpenDevice: open result is 10, (OK) > >>>> drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > >>>> drmOpenDevice: node name is /dev/dri/card0 > >>>> drmOpenDevice: open result is 10, (OK) > >>>> drmOpenByBusid: drmOpenMinor returns 10 > >>>> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > >>>> (II) [drm] DRM interface version 1.2 > >>>> (II) [drm] DRM open master succeeded. > >>>> (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12 > >>>> (--) NOUVEAU(0): [drm] kernel modesetting not available > >>>> (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3 > >>>> (II) NOUVEAU(0): Creating default Display subsection in Screen section > >>>> "Default Screen Section" for depth/fbbpp 24/32 > >>>> (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 > >>>> (==) NOUVEAU(0): RGB weight 888 > >>>> (==) NOUVEAU(0): Default visual is TrueColor > >>>> (II) Loading sub module "vgahw" > >>>> (II) LoadModule: "vgahw" > >>>> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > >>>> (II) Module vgahw: vendor="X.Org Foundation" > >>>> compiled for 1.5.99.902, module version = 0.1.0 > >>>> ABI class: X.Org Video Driver, version 5.0 > >>>> (==) NOUVEAU(0): Randr1.2 support enabled > >>>> (==) NOUVEAU(0): Using HW cursor > >>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space > >>>> (==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear > >>>> (II) UnloadModule: "nouveau" > >>>> (II) UnloadModule: "vgahw" > >>>> (II) Unloading /usr/local/lib/xorg/modules//libvgahw.so > >>>> (II) UnloadModule: "int10" > >>>> (II) Unloading /usr/local/lib/xorg/modules//libint10.so > >>>> (EE) Screen(s) found, but none have a usable configuration. > >>>> > >>>> Fatal server error: > >>>> no screens found > >>>> > >>>> Please consult the The X.Org Foundation support > >>>> at http://wiki.x.org > >>>> for help. > >>>> Please also check the log file at "/var/log/Xorg.0.log" for additional information. > >>>> > >>>> > >>>> > -- Robert Noland <rnoland_at_FreeBSD.org> FreeBSD
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:44 UTC