Robert Noland wrote: > On Wed, 2009-03-25 at 11:36 -0500, Robert Noland wrote: > >> On Wed, 2009-03-25 at 16:37 +0800, wsk wrote: >> >>> Robert Noland wrote: >>> >>>> On Wed, 2009-03-25 at 08:46 +0800, wsk wrote: >>>> >>>> >>>>> Robert Noland wrote: >>>>> >>>>> >>>>>> On Tue, 2009-03-24 at 12:19 +0800, wsk wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Robert Noland wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Mon, 2009-03-23 at 09:28 +0800, wsk wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>> Ok, this patch should work on NV50 chips also. >>>>>>>>>> >>>>>>>>>> What you get is EXA and Xv. >>>>>>>>>> >>>>>>>>>> You still need: >>>>>>>>>> >>>>>>>>>> A recent -CURRENT or -STABLE. >>>>>>>>>> >>>>>>>>>> git master of libdrm and xf86-video-nouveau. >>>>>>>>>> >>>>>>>>>> This patch. >>>>>>>>>> >>>>>>>>>> Things I've figured out since the last patch... >>>>>>>>>> >>>>>>>>>> On NV50 class hardware you need to have a compositing manager running >>>>>>>>>> for Xv to work. That means xcompmgr, metacity with composite enabled, >>>>>>>>>> xfce (rumored to work as well, haven't tried). If your running Gnome >>>>>>>>>> with metacity, open gconf-editor and go to apps->metacity->general and >>>>>>>>>> check the composite box. >>>>>>>>>> >>>>>>>>>> On NV40 class hardware, you don't need the composite manager. In fact >>>>>>>>>> (at least with Xserver 1.6 which I'm running now), if a composite >>>>>>>>>> manager is enabled, I'm seeing high cpu utilization from Xorg under some >>>>>>>>>> circumstances. I don't think this is a drm issue, but still an issue. >>>>>>>>>> For me, if I start a video using mplayer in an xterm, cpu is fine as >>>>>>>>>> long as that xterm is the foreground window. If it is not the >>>>>>>>>> foreground window, even if it isn't obscured I see the cpu utilization. >>>>>>>>>> Disabling the composite manager makes everything fine. >>>>>>>>>> >>>>>>>>>> http://people.freebsd.org/~rnoland/drm-nouveau-032109.patch <http://people.freebsd.org/%7Ernoland/drm-nouveau-032109.patch> >>>>>>>>>> >>>>>>>>>> robert. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> get the following errors and exitThis is a pre-release version of the X server from The X.Org Foundation. >>>>>>>>> It is not supported in any way. >>>>>>>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. >>>>>>>>> Select the "xorg" product for bugs you find in this release. >>>>>>>>> Before reporting bugs in pre-release versions please check the >>>>>>>>> latest version in the X.Org Foundation git repository. >>>>>>>>> See http://wiki.x.org/wiki/GitPage for git access instructions. >>>>>>>>> >>>>>>>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2) >>>>>>>>> Release Date: 2009-1-30 >>>>>>>>> X Protocol Version 11, Revision 0 >>>>>>>>> Build Operating System: FreeBSD 7.1-STABLE amd64 >>>>>>>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRE >>>>>>>>> RELEASE #2: Sun Mar 22 19:44:23 CST 2009 wsk_at_lp.gddsn.org.cn:/usr/obj/usr/sr >>>>>>>>> c/sys/WSK amd64 >>>>>>>>> Build Date: 06 February 2009 04:22:44PM >>>>>>>>> >>>>>>>>> Before reporting problems, check http://wiki.x.org >>>>>>>>> to make sure that you have the latest version. >>>>>>>>> Markers: (--) probed, (**) from config file, (==) default setting, >>>>>>>>> (++) from command line, (!!) notice, (II) informational, >>>>>>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>>>>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009 >>>>>>>>> ing config file: "xorg.conf1" >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 >>>>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>>>> drm0: [ITHREAD] >>>>>>>>> info: [drm] Allocating FIFO number 1 >>>>>>>>> info: [drm] nouveau_fifo_alloc: initialised FIFO 1 >>>>>>>>> info: [drm] PFIFO_DMA_PUSHER - Ch 1 >>>>>>>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space >>>>>>>>> (EE) Screen(s) found, but none have a usable configuration. >>>>>>>>> >>>>>>>>> Fatal server error: >>>>>>>>> no screens found >>>>>>>>> >>>>>>>>> Please consult the The X.Org Foundation support >>>>>>>>> at http://wiki.x.org >>>>>>>>> for help. >>>>>>>>> Please also check the log file at "/var/log/Xorg.0.log" for additional informati >>>>>>>>> on. >>>>>>>>> >>>>>>>>> info: [drm] nouveau_fifo_free: freeing fifo 1 >>>>>>>>> error: [drm:pid30722:nouveau_fifo_free] *ERROR* Failed to idle channel 1 before >>>>>>>>> destroy.Prepare for strangeness.. >>>>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>>>> >>>>>>>>> what can i do ? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> plain text document attachment (Xorg.0.log) >>>>>>>>> This is a pre-release version of the X server from The X.Org Foundation. >>>>>>>>> It is not supported in any way. >>>>>>>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. >>>>>>>>> Select the "xorg" product for bugs you find in this release. >>>>>>>>> Before reporting bugs in pre-release versions please check the >>>>>>>>> latest version in the X.Org Foundation git repository. >>>>>>>>> See http://wiki.x.org/wiki/GitPage for git access instructions. >>>>>>>>> >>>>>>>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2) >>>>>>>>> Release Date: 2009-1-30 >>>>>>>>> X Protocol Version 11, Revision 0 >>>>>>>>> Build Operating System: FreeBSD 7.1-STABLE amd64 >>>>>>>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #2: Sun Mar 22 19:44:23 CST 2009 wsk_at_lp.gddsn.org.cn:/usr/obj/usr/src/sys/WSK amd64 >>>>>>>>> Build Date: 06 February 2009 04:22:44PM >>>>>>>>> >>>>>>>>> Before reporting problems, check http://wiki.x.org >>>>>>>>> to make sure that you have the latest version. >>>>>>>>> Markers: (--) probed, (**) from config file, (==) default setting, >>>>>>>>> (++) from command line, (!!) notice, (II) informational, >>>>>>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>>>>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009 >>>>>>>>> (++) Using config file: "xorg.conf1" >>>>>>>>> (==) No Layout section. Using the first Screen section. >>>>>>>>> (==) No screen section available. Using defaults. >>>>>>>>> (**) |-->Screen "Default Screen Section" (0) >>>>>>>>> (**) | |-->Monitor "<default monitor>" >>>>>>>>> (==) No device specified for screen "Default Screen Section". >>>>>>>>> Using the first device section listed. >>>>>>>>> (**) | |-->Device "Card0" >>>>>>>>> (==) No monitor specified for screen "Default Screen Section". >>>>>>>>> Using a default monitor configuration. >>>>>>>>> (==) Automatically adding devices >>>>>>>>> (==) Automatically enabling devices >>>>>>>>> (==) No FontPath specified. Using compiled-in default. >>>>>>>>> (==) FontPath set to: >>>>>>>>> built-ins >>>>>>>>> (==) ModulePath set to "/usr/local/lib/xorg/modules" >>>>>>>>> (II) Cannot locate a core pointer device. >>>>>>>>> (II) Cannot locate a core keyboard device. >>>>>>>>> (II) The server relies on HAL to provide the list of input devices. >>>>>>>>> If no devices become available, reconfigure HAL or disable AllowEmptyInput. >>>>>>>>> (II) Loader magic: 0xb20 >>>>>>>>> (II) Module ABI versions: >>>>>>>>> X.Org ANSI C Emulation: 0.4 >>>>>>>>> X.Org Video Driver: 5.0 >>>>>>>>> X.Org XInput driver : 4.0 >>>>>>>>> X.Org Server Extension : 2.0 >>>>>>>>> (II) Loader running on freebsd >>>>>>>>> (--) Using syscons driver with X support (version 2.0) >>>>>>>>> (--) using VT number 9 >>>>>>>>> >>>>>>>>> (--) PCI:*(0_at_1:0:0) nVidia Corporation Quadro NVS 140M rev 161, Mem _at_ 0xfd000000/16777216, 0x00000000/268435456, 0xfa000000/33554432, I/O _at_ 0x0000df00/128, BIOS _at_ 0x????????/65536 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> Ok, thats a new one... >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> (II) System resource ranges: >>>>>>>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >>>>>>>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >>>>>>>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >>>>>>>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >>>>>>>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >>>>>>>>> (II) LoadModule: "extmod" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so >>>>>>>>> (II) Module extmod: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 1.0.0 >>>>>>>>> Module class: X.Org Server Extension >>>>>>>>> ABI class: X.Org Server Extension, version 2.0 >>>>>>>>> (II) Loading extension MIT-SCREEN-SAVER >>>>>>>>> (II) Loading extension XFree86-VidModeExtension >>>>>>>>> (II) Loading extension XFree86-DGA >>>>>>>>> (II) Loading extension DPMS >>>>>>>>> (II) Loading extension XVideo >>>>>>>>> (II) Loading extension XVideo-MotionCompensation >>>>>>>>> (II) Loading extension X-Resource >>>>>>>>> (II) LoadModule: "dbe" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so >>>>>>>>> (II) Module dbe: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 1.0.0 >>>>>>>>> Module class: X.Org Server Extension >>>>>>>>> ABI class: X.Org Server Extension, version 2.0 >>>>>>>>> (II) Loading extension DOUBLE-BUFFER >>>>>>>>> (II) LoadModule: "glx" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so >>>>>>>>> (II) Module glx: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 1.0.0 >>>>>>>>> ABI class: X.Org Server Extension, version 2.0 >>>>>>>>> (==) AIGLX disabled >>>>>>>>> (==) Exporting typical set of GLX visuals >>>>>>>>> (II) Loading extension GLX >>>>>>>>> (II) LoadModule: "record" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so >>>>>>>>> (II) Module record: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 1.13.0 >>>>>>>>> Module class: X.Org Server Extension >>>>>>>>> ABI class: X.Org Server Extension, version 2.0 >>>>>>>>> (II) Loading extension RECORD >>>>>>>>> (II) LoadModule: "dri" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so >>>>>>>>> (II) Module dri: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 1.0.0 >>>>>>>>> ABI class: X.Org Server Extension, version 2.0 >>>>>>>>> (II) Loading extension XFree86-DRI >>>>>>>>> (II) LoadModule: "nouveau" >>>>>>>>> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so >>>>>>>>> (II) Module nouveau: vendor="X.Org Foundation" >>>>>>>>> compiled for 1.5.99.902, module version = 0.0.10 >>>>>>>>> Module class: X.Org Video Driver >>>>>>>>> ABI class: X.Org Video Driver, version 5.0 >>>>>>>>> (II) NOUVEAU driver Date: Wed Mar 18 09:36:33 2009 +1000 >>>>>>>>> (II) NOUVEAU driver for NVIDIA chipset families : >>>>>>>>> RIVA TNT (NV04) >>>>>>>>> RIVA TNT2 (NV05) >>>>>>>>> GeForce 256 (NV10) >>>>>>>>> GeForce 2 (NV11, NV15) >>>>>>>>> GeForce 4MX (NV17, NV18) >>>>>>>>> GeForce 3 (NV20) >>>>>>>>> GeForce 4Ti (NV25, NV28) >>>>>>>>> GeForce FX (NV3x) >>>>>>>>> GeForce 6 (NV4x) >>>>>>>>> GeForce 7 (G7x) >>>>>>>>> GeForce 8 (G8x) >>>>>>>>> (II) Primary Device is: PCI 01_at_00:00:0 >>>>>>>>> (II) resource ranges after probing: >>>>>>>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >>>>>>>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >>>>>>>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >>>>>>>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >>>>>>>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >>>>>>>>> (--) NOUVEAU(0): Chipset: "NVIDIA NV86" >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> Hrm, NV86... I'll have to ask around about that. Meanwhile can you send >>>>>>>> me a pciconf -lvb which should at least show us the BAR configuration. >>>>>>>> >>>>>>>> Ok, my sources are telling me that this should work and that it is an >>>>>>>> NV50, or at least should work the same... >>>>>>>> >>>>>>>> Also, just to be safe, please rebuild/reinstall devel/libpciaccess. I'm >>>>>>>> not sure if it may be trashing the BARs somehow. >>>>>>>> >>>>>>>> robert. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> bar [24] = type I/O Port, range 32, base 0xeff0, size 16, enabled >>>>>>> ichsmb0_at_pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 >>>>>>> rev=0x02 hdr=0x00 >>>>>>> vendor = 'Intel Corporation' >>>>>>> device = '82801H (ICH8 Family) SMBus Controller' >>>>>>> class = serial bus >>>>>>> subclass = SMBus >>>>>>> bar [10] = type Memory, range 32, base 0xfebfbf00, size 256, enabled >>>>>>> bar [20] = type I/O Port, range 32, base 0x10c0, size 32, enabled >>>>>>> vgapci0_at_pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de >>>>>>> rev=0xa1 hdr=0x00 >>>>>>> vendor = 'Nvidia Corp' >>>>>>> device = 'Unknown nVidia Quadro FX 570M' >>>>>>> class = display >>>>>>> subclass = VGA >>>>>>> bar [10] = type Memory, range 32, base 0xfd000000, size 16777216, enabled >>>>>>> >>>>>>> >>>>>>> >>>>>> Ok, this is BAR 0, BARs 1 and 2 are indeed are not showing up. BAR 1 >>>>>> should be your framebuffer and should be where most of your memory is. >>>>>> (This is the memory the tell you about when you buy the card, 256M, >>>>>> 512M, etc.) It should probably be a 64bit BAR, which is why BAR 2 isn't >>>>>> there. We are going to need more details on your card... >>>>>> >>>>>> >>>>>> >>>>> indeed,my DELL D830 laptop video card is Quadro NVS 140M with 256M memory. >>>>> but it recognized Quadro FX 570M with pciconfig. >>>>> >>>>> >>>> So, the nouveau folks want me to get you to either boot linux and see >>>> what lspci shows for this card, or at least install the lspci port and >>>> see what it says. I don't think it is going to reveal anything, but who >>>> knows... This is not a driver issue at this point, the BARs just don't >>>> appear to be present. >>>> >>>> robert. >>>> >>>> >>>> >>> ok,here's my lspci -v messags with linux Fedora live CD :-) >>> and thanks your Re >>> >>> >>> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M >>> (rev a1) (prog-if 00 [VGA controller]) >>> Subsystem: Dell Device 01fe >>> Flags: bus master, fast devsel, latency 0, IRQ 5 >>> Memory at fd000000 (32-bit, non-prefetchable) [size=16M] >>> Memory at e0000000 (64-bit, prefetchable) [size=256M] >>> Memory at fa000000 (64-bit, non-prefetchable) [size=32M] >>> I/O ports at df00 [size=128] >>> [virtual] Expansion ROM at fc000000 [disabled] [size=128K] >>> Capabilities: [60] Power Management version 2 >>> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 >>> Enable- >>> Capabilities: [78] Express Endpoint, MSI 00 >>> Capabilities: [100] Virtual Channel <?> >>> Capabilities: [128] Power Budgeting <?> >>> Capabilities: [600] Vendor Specific Information <?> >>> Kernel modules: nvidiafb >>> >> Ok, we need a little help on this one then... I don't know why we >> wouldn't see BAR 1. Time to rope jhb_at_ in. >> > > Can you send a verbose boot log. > > robert. > > your meant is on BSD or on Linux ? i guess on BSD so Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-PRERELEASE #2: Sun Mar 22 19:44:23 CST 2009 wsk_at_lp.gddsn.org.cn:/usr/obj/usr/src/sys/WSK Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e5f000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80e5f210. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80e5f878. Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff80e5fe68. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80e60450. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80e60ab8. Preloaded elf obj module "/boot/kernel/ichsmb.ko" at 0xffffffff80e60b18. Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff80e61040. Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff80e614a8. Preloaded elf obj module "/boot/kernel/ng_ubt.ko" at 0xffffffff80e61a98. Preloaded elf obj module "/boot/kernel/netgraph.ko" at 0xffffffff80e62000. Calibrating clock(s) ... i8254 clock: 1193158 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394013896 Hz CPU: Intel(R) Core(TM)2 Duo CPU T7700 _at_ 2.40GHz (2394.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fa Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4278595584 (4080 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000e90000 - 0x00000000d76e2fff, 3599052800 bytes (878675 pages) 0x0000000100002000 - 0x000000011ffeffff, 536797184 bytes (131054 pages) avail memory = 4113477632 (3922 MB) ACPI APIC Table: <DELL M08 > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ACPI: RSDP _at_ 0x0xfbb00/0x0024 (v 2 DELL ) ACPI: XSDT _at_ 0x0xdfe5d200/0x0064 (v 1 DELL M08 0x27D8021C ASL 0x00000061) ACPI: FACP _at_ 0x0xdfe5d09c/0x00F4 (v 4 DELL M08 0x27D8021C ASL 0x00000061) ACPI: DSDT _at_ 0x0xdfe5d800/0x63F7 (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624) ACPI: FACS _at_ 0x0xdfe6c000/0x0040 ACPI: HPET _at_ 0x0xdfe5d300/0x0038 (v 1 DELL M08 0x00000001 ASL 0x00000061) ACPI: APIC _at_ 0x0xdfe5d400/0x0068 (v 1 DELL M08 0x27D8021C ASL 0x00000047) ACPI: ASF! _at_ 0x0xdfe5d000/0x007E (v 32 DELL M08 0x27D8021C ASL 0x00000061) ACPI: MCFG _at_ 0x0xdfe5d3c0/0x003E (v 16 DELL M08 0x27D8021C ASL 0x00000061) ACPI: SLIC _at_ 0x0xdfe5d49c/0x0176 (v 1 DELL M08 0x27D8021C ASL 0x00000061) ACPI: TCPA _at_ 0x0xdfe5d700/0x0032 (v 1 0x00000000 ASL 0x00000000) ACPI: SSDT _at_ 0x0xdfe5b97e/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> wlan_amrr: <AMRR Transmit Rate Control Algorithm> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> mem: <memory> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 22 2009 19:44:13) acpi0: <DELL M08 > on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0 ACPI: SSDT _at_ 0x0xdfe6c080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of 100000, dfd5b800 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 9 10 11 Validation 0 255 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 9 10 11 Validation 0 255 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 5 7 9 10 11 Validation 0 255 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a01, revid=0x0c domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2834, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfebfc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283f, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2841, revid=0x02 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2845, revid=0x02 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2849, revid=0x02 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2830, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2831, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2832, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2836, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xf2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2828, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled map[20]: type I/O Port, range 32, base 0x6ee0, size 4, enabled map[24]: type I/O Port, range 32, base 0xeff0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283e, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[10]: type Memory, range 32, base 0xfebfbf00, size 8, enabled map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfa000000-0xfeafffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0429, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xfa000000, size 25, enabled pcib1: requested memory range 0xfa000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib1: requested I/O range 0xdf00-0xdf7f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfd000000-0xfdffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered hdac0: <Intel 82801H High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 21 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090316_0130 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfebfc000 hdac0: [MPSAFE] hdac0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 11 pcib2: subordinate bus 11 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci11: <ACPI PCI bus> on pcib2 pci11: domain=0, physical bus=11 pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 12 pcib3: subordinate bus 12 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xf9f00000-0xf9ffffff pcib3: prefetched decode 0xf0000000-0xf00fffff pci12: <ACPI PCI bus> on pcib3 pci12: domain=0, physical bus=12 found-> vendor=0x14e4, dev=0x4328, revid=0x03 domain=0, bus=12, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf9ffc000, size 14, enabled pcib3: requested memory range 0xf9ffc000-0xf9ffffff: good map[18]: type Prefetchable Memory, range 64, base 0xf0000000, size 20, enabled pcib3: requested memory range 0xf0000000-0xf00fffff: good pcib3: matched entry for 12.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 pci12: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib4: domain 0 pcib4: secondary bus 13 pcib4: subordinate bus 14 pcib4: I/O decode 0xc000-0xcfff pcib4: memory decode 0xf9c00000-0xf9efffff pcib4: prefetched decode 0xf0100000-0xf03fffff pci13: <ACPI PCI bus> on pcib4 pci13: domain=0, physical bus=13 pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 9 pcib5: subordinate bus 9 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xf9b00000-0xf9bfffff pcib5: no prefetched decode pci9: <ACPI PCI bus> on pcib5 pci9: domain=0, physical bus=9 found-> vendor=0x14e4, dev=0x1673, revid=0x02 domain=0, bus=9, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf9bf0000, size 16, enabled pcib5: requested memory range 0xf9bf0000-0xf9bfffff: good pcib5: matched entry for 9.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> mem 0xf9bf0000-0xf9bfffff irq 17 at device 0.0 on pci9 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf9bf0000 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 52 bge0: using IRQ 256 for MSI bge0: Disabling fastboot bge0: Disabling fastboot miibus0: <MII bus> on bge0 brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x0050ef, model 0x000c, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:1c:23:97:bd:de bge0: [MPSAFE] bge0: [ITHREAD] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 usb6: USB revision 2.0 uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 uhub6: 6 ports with 6 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 3 pcib6: subordinate bus 4 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xf9a00000-0xf9afffff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci3: <ACPI PCI bus> on pcib6 pci3: domain=0, physical bus=3 found-> vendor=0x1217, dev=0x7135, revid=0x21 domain=0, bus=3, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=0x1217, dev=0x00f7, revid=0x02 domain=0, bus=3, slot=1, func=4 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf9aff000, size 12, enabled pcib6: requested memory range 0xf9aff000-0xf9afffff: good map[14]: type Memory, range 32, base 0xf9afe800, size 11, enabled pcib6: requested memory range 0xf9afe800-0xf9afefff: good pcib6: matched entry for 3.1.INTA pcib6: slot 1 INTA hardwired to IRQ 19 cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3 pcib6: cbb0 requested memory range 0xf9a00000-0xf9afffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf9a00000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib6: matched entry for 3.1.INTA pcib6: slot 1 INTA hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x71351217 0x04100007 0x06070021 0x00824000 0x10: 0xf9a00000 0x020000a0 0x20040403 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x04400113 0x40: 0x01fe1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00052404 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000015 0x0000000a 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x09004100 0x80e203ea 0x00000000 0x00400118 0xe0: 0x00820000 0x00000000 0x83000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1217, dev=f7 fwohci0: vendor=1217, dev=f7 fwohci0: <1394 Open Host Controller Interface> mem 0xf9aff000-0xf9afffff,0xf9afe800-0xf9afefff irq 19 at device 1.4 on pci3 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf9aff000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 42:4f:c0:00:11:0a:1c:5c fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:0a:1c:5c fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:0a:1c:5c fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:11:0a:1c:5c _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xd76c0000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata0: [ITHREAD] atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 17 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6ee0 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 55 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xeff0 ata2: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6eb0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6eb8 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6ec0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6ec8 ata3: reset tp1 mask=00 ostat0=ff ostat1=ff ata3: [MPSAFE] ata3: [ITHREAD] ichsmb0: <SMBus controller> port 0x10c0-0x10df mem 0xfebfbf00-0xfebfbfff irq 17 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x10c0 ichsmb0: [GIANT-LOCKED] ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58 sio0: [FILTER] cpu0: <ACPI CPU> on acpi0 ACPI: SSDT _at_ 0x0xdfe5c4b4/0x02C8 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624) ACPI: SSDT _at_ 0x0xdfe5be4a/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (3375, 3110) est0: Invalid freq 2401, ignored. est0: Invalid id16 (set, cur) = (34827, 1554) est0: Invalid freq 800, ignored. p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT _at_ 0x0xdfe5c77c/0x00C4 (v 1 PmRef Cpu1Ist 0x00003000 INTL 0x20050624) ACPI: SSDT _at_ 0x0xdfe5c42f/0x0085 (v 1 PmRef Cpu1Cst 0x00003000 INTL 0x20050624) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (3375, 3110) est1: Invalid freq 2401, ignored. est1: Invalid id16 (set, cur) = (34827, 1554) est1: Invalid freq 800, ignored. p4tcc1: <CPU Frequency Thermal Control> on cpu1 ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 0: ioport 0xc00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ubt0: <vendor 0x413c product 0x8140, class 224/1, rev 2.00/43.15, addr 2> on uhub0 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294 ums0: <Microsoft Comfort Optical Mouse 1000, class 0/0, rev 2.00/1.21, addr 2> on uhub3 ums0: 3 buttons and Z dir. uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub5 uhub7: 4 ports with 3 removable, self powered ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub7 Device configuration finished. Reducing kern.maxvnodes 258634 -> 100000 procfs registered WARNING: ZFS is considered to be an experimental feature in FreeBSD. lapic: Divisor 2, Frequency 99750584 hz Timecounter "TSC" frequency 2394013896 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_acad0: acline initialization start acpi_acad0: Onata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire Line acpi_acad0: acline initialization done, tried 1 times battery0: baacd0: setting PIO4 on ICH8M chip ttery initialization start acd0: setting UDMA33 on ICH8M chip battery0: battery initialization done, tried 1 times battery1: battery initialization start ZFS filesystem version 6 ZFS storage pool version 6 acd0: <HL-DT-ST DVD+/-RW GSA-T11N/A103> DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 152627MB <Seagate ST9160823AS 3.ADB> at ata2-master SATA300 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed hdac0: Probing codec #0... hdac0: HDA Codec #0: Sigmatel STAC9205X hdac0: HDA Codec ID: 0x838476a0 hdac0: Vendor: 0x8384 hdac0: Device: 0x76a0 hdac0: Revision: 0x02 hdac0: Stepping: 0x04 hdac0: PCI Subvendor: 0x01fe1028 hdac0: Found audio FG nid=1 startnode=10 endnode=38 total=28 hdac0: Probing codec #1... hdac0: HDA Codec #1: Conexant (Unknown) hdac0: HDA Codec ID: 0x14f12c06 hdac0: Vendor: 0x14f1 hdac0: Device: 0x2c06 hdac0: Revision: 0x00 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x01fe1028 hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0xc0000005 NumGPIO=5 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0 hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0 hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0 hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0 hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: 2 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=13 seq=0 hdac0: Pin nid=10 seq=15 hdac0: Association 1 (2) in: hdac0: Pin nid=12 seq=0 hdac0: Pin nid=11 seq=14 hdac0: Tracing association 0 (1) hdac0: Pin 13 traced to DAC 16 hdac0: Pin 10 traced to DAC 16 and hpredir 0 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Pin 12 traced to ADC 18 hdac0: Pin 11 traced to ADC 18 hdac0: Association 1 (2) trace succeeded hdac0: Tracing input monitor hdac0: Tracing beeper hdac0: Enabling headphone/speaker audio routing switching: hdac0: as=0 sense nid=10 [UNSOL] hdac0: Pin sense: nid=10 res=0x7fffffff hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: IN amp: 0x00050f00 hdac0: OUT amp: 0x80027f7f hdac0: hdac0: nid: 10 hdac0: Name: pin: Headphones (Black Jack) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 0 (0x00008000) hdac0: Pin cap: 0x0000173f hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x0321101f hdac0: Pin control: 0x00000080 HP hdac0: connections: 2 hdac0: | hdac0: + <- nid=16 [audio output] (selected) hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED] hdac0: hdac0: nid: 11 hdac0: Name: pin: Line-in (Black Jack) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00004000) hdac0: OSS: line (line) hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x0381102e hdac0: Pin control: 0x00000024 IN VREFs hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=16 [audio output] (selected) hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED] hdac0: hdac0: nid: 12 hdac0: Name: pin: Mic (Fixed) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: monitor (monitor) hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x90a70120 hdac0: Pin control: 0x00000024 IN VREFs hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED] hdac0: hdac0: nid: 13 hdac0: Name: pin: Speaker (Fixed) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x0000003f hdac0: ISC TRQD PDC HP OUT IN hdac0: Pin config: 0x90170110 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=16 [audio output] hdac0: hdac0: nid: 14 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x40f000f0 hdac0: Pin control: 0x00000000 hdac0: connections: 1 hdac0: | hdac0: + <- nid=16 [audio output] hdac0: hdac0: nid: 15 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x40f000f1 hdac0: Pin control: 0x00000000 hdac0: connections: 1 hdac0: | hdac0: + <- nid=17 [audio output] [DISABLED] hdac0: hdac0: nid: 16 hdac0: Name: audio output hdac0: Widget cap: 0x000d0c05 hdac0: LRSWAP PWR STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: Output amp: 0x80027f7f hdac0: mute=1 step=127 size=2 offset=127 hdac0: hdac0: nid: 17 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x000d0c05 hdac0: LRSWAP PWR STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: Output amp: 0x80027f7f hdac0: mute=1 step=127 size=2 offset=127 hdac0: hdac0: nid: 18 hdac0: Name: audio input hdac0: Widget cap: 0x001d0541 hdac0: PWR PROC STEREO hdac0: Association: 1 (0x00004001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=29 [audio selector] hdac0: hdac0: nid: 19 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x001d0541 hdac0: PWR PROC STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=30 [audio selector] [DISABLED] hdac0: hdac0: nid: 20 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x0040010c hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x40f000f2 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80051f1f hdac0: mute=1 step=31 size=5 offset=31 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=21 [audio mixer] [DISABLED] hdac0: hdac0: nid: 21 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200100 hdac0: connections: 1 hdac0: | hdac0: + <- nid=16 [audio output] hdac0: hdac0: nid: 22 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x40f000f3 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 23 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x40f000f4 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 24 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x40f000f5 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 25 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, monitor hdac0: Output amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: connections: 7 hdac0: | hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED] hdac0: + <- nid=11 [pin: Line-in (Black Jack)] hdac0: + <- nid=12 [pin: Mic (Fixed)] (selected) hdac0: + [DISABLED] <- nid=13 [pin: Speaker (Fixed)] hdac0: + [DISABLED] <- nid=10 [pin: Headphones (Black Jack)] hdac0: hdac0: nid: 26 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: connections: 7 hdac0: | hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED] (selected) hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED] hdac0: + <- nid=11 [pin: Line-in (Black Jack)] hdac0: + <- nid=12 [pin: Mic (Fixed)] hdac0: + <- nid=13 [pin: Speaker (Fixed)] hdac0: + <- nid=10 [pin: Headphones (Black Jack)] hdac0: hdac0: nid: 27 hdac0: Name: audio selector hdac0: Widget cap: 0x00300103 hdac0: STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, monitor hdac0: Input amp: 0x00050f00 hdac0: mute=0 step=15 size=5 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=25 [audio selector] hdac0: hdac0: nid: 28 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x00300103 hdac0: STEREO hdac0: Input amp: 0x00050f00 hdac0: mute=0 step=15 size=5 offset=0 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=26 [audio selector] [DISABLED] hdac0: hdac0: nid: 29 hdac0: Name: audio selector hdac0: Widget cap: 0x0030090d hdac0: LRSWAP STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, monitor hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 3 hdac0: | hdac0: + <- nid=27 [audio selector] (selected) hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED] hdac0: hdac0: nid: 30 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030090d hdac0: LRSWAP STEREO hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 3 hdac0: | hdac0: + <- nid=28 [audio selector] [DISABLED] (selected) hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED] hdac0: hdac0: nid: 31 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00040211 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e05e0 hdac0: 16 20 24 bits, 44 48 88 96 192 KHz hdac0: hdac0: nid: 32 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x00140311 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=34 [pin: Other (None)] [DISABLED] hdac0: hdac0: nid: 33 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400301 hdac0: DIGITAL STEREO hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x40f000f6 hdac0: Pin control: 0x00000000 hdac0: connections: 3 hdac0: | hdac0: + <- nid=31 [audio output] [DISABLED] (selected) hdac0: + <- nid=29 [audio selector] hdac0: + <- nid=30 [audio selector] [DISABLED] hdac0: hdac0: nid: 34 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00430681 hdac0: PWR DIGITAL UNSOL STEREO hdac0: Pin cap: 0x00010024 hdac0: PDC IN EAPD hdac0: Pin config: 0x40f000f7 hdac0: Pin control: 0x00000000 hdac0: EAPD: 0x00000002 hdac0: hdac0: nid: 35 hdac0: Name: beep widget hdac0: Widget cap: 0x0070000c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: Output amp: 0x00170303 hdac0: mute=0 step=3 size=23 offset=3 hdac0: hdac0: nid: 36 [DISABLED] hdac0: Name: volume widget hdac0: Widget cap: 0x00600000 hdac0: connections: 2 hdac0: | hdac0: + <- nid=16 [audio output] (selected) hdac0: + <- nid=17 [audio output] [DISABLED] hdac0: hdac0: nid: 37 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f00001 hdac0: STEREO hdac0: hdac0: Processing modem FG cad=1 nid=2... hdac0: pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07e0 pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm0: DAC: 16 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07e0 pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm0: ADC: 18 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=10 [pin: Headphones (Black Jack)] pcm0: | pcm0: + <- nid=16 [audio output] [src: pcm] pcm0: pcm0: nid=13 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=16 [audio output] [src: pcm] pcm0: pcm0: Record: pcm0: pcm0: nid=18 [audio input] pcm0: | pcm0: + <- nid=29 [audio selector] [src: line, monitor] pcm0: | pcm0: + <- nid=27 [audio selector] [src: line, monitor] pcm0: | pcm0: + <- nid=25 [audio selector] [src: line, monitor] pcm0: | pcm0: + <- nid=11 [pin: Line-in (Black Jack)] [src: line] pcm0: + <- nid=12 [pin: Mic (Fixed)] [src: monitor] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 10 (nid 35 out): -18/0dB (4 steps) pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 4 (nid 25 out): 0/40dB (5 steps) pcm0: +- ctl 6 (nid 27 in 0): 0/22dB (16 steps) pcm0: +- ctl 8 (nid 29 out): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "rec": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 39b0000, 4000; 0xffffffff02108000 -> 39b0000 pcm0: sndbuf_setmap 39c0000, 4000; 0xffffffff02118000 -> 39c0000 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): CAM Status: SCSI Status Error (probe0:ata0:0:0:0): SCSI Status: Check Condition (probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0 (probe0:ata0:0:0:0): Medium not present (probe0:ata0:0:0:0): (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0 (probe0:ata0:0:0:0): Medium not present Unretryable error (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: <HL-DT-ST DVD+-RW GSA-T11N A103> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ( c d 0 : aItDa:0: 00:x00:1000)0:0 0e0r r o rV E6R: (0cxd000:0a5t0a001:40 :L0D:R0:) :0 xU0n0r0e0t0r0y0a0b lDeF RE:r r0oxrf ffcfdf0f faft a t al0i nbtu0s: 00 xta0r0g0e1t0 700 0 lluinn t01: c0dx00:0 0<0H0L4-0D0T -TSPTR :D V0Dx+0-0R0W0 0G0S0A0- TS1V1RN: A01x0030>0 0R0e1mfofva b l et iCmDe-rR:O M0 xS0C0S0I2-000 edfe vtihceer m : c0dx00:0 03130.000000 MeBr/rs: t0rxa0n0s0f1e0r0s0 0 cpdc0m:: A0txt0e0m0p1t0 0t0o0 q uery idoeavpiicce0 :s iAzssei gfnaiinlge d:I SNAO TI RRQE A1D Yt,o lMoecdailu mA PnIoCt 0pre sieonatpi c0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 22 to local APIC 1 msi: Ass(icgdn0i:nga taM0S:I0 :IR0Q: 0)2:5 6e tror olro c6a l( cAdP0I:C a0ta 0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error scsi_cd.c::ioctl cmd=4400648b error=25 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error Trying to mount root from zfs:tank start_init: trying /sbin/init bge0: Disabling fastboot bge0: Disabling fastboot WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() WARNING: attempt to net_add_domain(netgraph) after domainfinalize() bge0: link UP Linux ELF exec handler installed >> robert. >> >> >>> 0c:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n >>> (rev 03) >>> Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card >>> Flags: bus master, fast devsel, latency 0, IRQ 17 >>> Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K] >>> Memory at f0000000 (64-bit, prefetchable) [size=1M] >>> Capabilities: [40] Power Management version 2 >>> Capabilities: [58] Vendor Specific Information <?> >>> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 >>> Enable- >>> Capabilities: [d0] Express Endpoint, MSI 00 >>> Capabilities: [100] Advanced Error Reporting >>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- >>> ECRC- UnsupReq- ACSVoil- >>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- >>> ECRC- UnsupReq- ACSVoil- >>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ >>> MalfTLP+ ECRC- UnsupReq- ACSVoil- >>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- >>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ >>> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- >>> Capabilities: [13c] Virtual Channel <?> >>> Capabilities: [160] Device Serial Number 1c-00-a4-ff-ff-26-df-c0 >>> Capabilities: [16c] Power Budgeting <?> >>> Kernel driver in use: b43-pci-bridge >>> Kernel modules: ssb >>> >>> >>>>>> >>>>>> >>>>>> >>>>>>> bar [1c] = type Memory, range 64, base 0xfa000000, size 33554432, enabled >>>>>>> >>>>>>> >>>>>>> >>>>>> This one is BAR 3, which is used when it doesn't find BAR 1. >>>>>> >>>>>> robert. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> bar [24] = type I/O Port, range 32, base 0xdf00, size 128, enabled >>>>>>> ndis0_at_pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4 >>>>>>> rev=0x03 hdr=0x00 >>>>>>> >>>>>>> and follow your intrudction.still pain me :( >>>>>>> >>>>>>> (++) Using config file: "xorg.conf1" >>>>>>> drm0: <NVidia Display Adapter> on vgapci0 >>>>>>> info: [drm] Detected an NV50 generation card (0x086900a2) >>>>>>> vgapci0: child drm0 requested pci_enable_busmaster >>>>>>> info: [drm] Initialized nouveau 0.0.12 20060213 >>>>>>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 >>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>> drm0: [ITHREAD] >>>>>>> info: [drm] Allocating FIFO number 1 >>>>>>> error: [drm:pid6494:nouveau_graph_trapped_channel] *ERROR* AIII, >>>>>>> invalid/inactiv >>>>>>> e channel id 128 >>>>>>> info: [drm] PGRAPH_ERROR - nSource:info: [drm] PROTECTION_ERRORinfo: >>>>>>> [drm] , nSt >>>>>>> atus:info: [drm] >>>>>>> info: [drm] PGRAPH_ERROR - Ch -1/0 Class 0x0000 Mthd 0x0000 Data >>>>>>> 0x00000000:0x00 >>>>>>> 000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 1: >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408900: 0x8000003f >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408904: 0xcf6f7f0e >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408908: 0xfff7367f >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040890c: 0x00001850 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408910: 0xafff3587 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e08: 0x800b6fad >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e0c: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e10: 0x4df4fd60 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e14: 0x000000d7 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e18: 0x3139768d >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e1c: 0xf6d69757 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e20: 0x63161650 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e24: 0x07220009 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 2: >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409900: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409904: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409908: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040990c: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409910: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e08: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e0c: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e10: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e14: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e1c: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e20: 0x00000000 >>>>>>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e24: 0x00000000 >>>>>>> info: [drm] nouveau_fifo_alloc: initialised FIFO 1 >>>>>>> info: [drm] PFIFO_DMA_PUSHER - Ch 1 >>>>>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space >>>>>>> (EE) Screen(s) found, but none have a usable configuration. >>>>>>> >>>>>>> Fatal server error: >>>>>>> no screens found >>>>>>> >>>>>>> Please consult the The X.Org Foundation support >>>>>>> at http://wiki.x.org >>>>>>> for help. >>>>>>> Please also check the log file at "/var/log/Xorg.0.log" for additional >>>>>>> informati >>>>>>> on. >>>>>>> >>>>>>> info: [drm] nouveau_fifo_free: freeing fifo 1 >>>>>>> error: [drm:pid6493:nouveau_fifo_free] *ERROR* Failed to idle channel 1 >>>>>>> before d >>>>>>> estroy.Prepare for strangeness.. >>>>>>> info: [drm] PFIFO_DMA_PUSHER - Ch 127 >>>>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff). >>>>>>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1 >>>>>>> >>>>>>> >>>>>>>Received on Wed Mar 25 2009 - 23:54:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:45 UTC