Re: Problems with usb bluetooth device

From: Hans Petter Selasky <hselasky_at_c2i.net>
Date: Sat, 28 Mar 2009 11:00:32 +0100
On Saturday 28 March 2009, Lars Engels wrote:
> Hi all,
>
> yesterday I bought a shiny new hama usb bluetooth dongle but I am having
> some problems using it:
>
> before loading ng_ubt:
>   usb2_alloc_device:1480: set address 2 failed (ignored)
>   usb2_alloc_device:1516: getting device descriptor at addr 2 failed!
>   usb2_req_re_enumerate:1421: addr=2, set address failed! (ignored)
>   usb2_req_re_enumerate:1434: getting device descriptor at addr 2 failed!
>   usb2_req_re_enumerate:1421: addr=2, set address failed! (ignored)
>   usb2_req_re_enumerate:1434: getting device descriptor at addr 2 failed!
>   ugen0.2: <> at usbus0 (disconnected)
> after loading ng_ubt:
>   uhub_reattach_port:413: could not allocate new device!
>   ubt0: <Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, class 224/1, rev
> 2.00/1.00, addr 2> on usbus2 ^^^^^^^^^^
>   internal bluetooth device
>   WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
>   WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
>   ugen0.2: <Cambridge Silicon Radio> at usbus0
>   ubt1: <Cambridge Silicon Radio Bluetooth USB dongle, class 224/1, rev
> 2.00/48.39, addr 2> on usbus0 ubt1: ubt_bulk_read_callback:837: bulk-in
> transfer failed: USB_ERR_STALLED ubt1: ubt_intr_read_callback:741:
> interrupt transfer failed: USB_ERR_STALLED ubt1: at uhub0, port 1, addr 2
> (disconnected)
>   ugen0.2: <Cambridge Silicon Radio> at usbus0 (disconnected)
> device re-inserted:
>   usb2_alloc_device:1480: set address 2 failed (ignored)
>   usb2_alloc_device:1516: getting device descriptor at addr 2 failed!
>   usb2_req_re_enumerate:1421: addr=2, set address failed! (ignored)
>   usb2_req_re_enumerate:1434: getting device descriptor at addr 2 failed!
>   usb2_req_re_enumerate:1421: addr=2, set address failed! (ignored)
>   usb2_req_re_enumerate:1434: getting device descriptor at addr 2 failed!
>   ugen0.2: <> at usbus0 (disconnected)
>   uhub_reattach_port:413: could not allocate new device!
>
> So the device is no longer recognized after I re-connect it. usbconfig does
> not show it: ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST
> spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2,
> cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at
> usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <EHCI root HUB
> Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen2.2: <Foxconn
> Bluetooth 2.0 plus EDR Broadcom Corp> at usbus2, cfg=0 md=HOST spd=FULL
> (12Mbps                                                                    
>                 pwr=ON
>
> It only lists the internal device...
>
> My CURRENT was compiled two days ago, so I should be up-to-date.

Does it work when you use an external USB HUB?

Does this device have some kind of autoinstall on it?

You could try enabling uhci/ehci debugging.
sysctl hw.usb2.uhci.debug = 15

Then we would know the exact cause of the error.

--HPS
Received on Sat Mar 28 2009 - 08:58:05 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:45 UTC