On Saturday 28 March 2009, Alex Keda wrote: > Hans Petter Selasky пишет: > > On Saturday 28 March 2009, Alex Keda wrote: > >> Hans Petter Selasky пишет: > >>> On Monday 23 March 2009, Alex Keda wrote: > >>>> I have USB floppy. > >>>> > >>>> Mar 24 00:11:25 HP kernel: usb2_alloc_device:1516: getting device > >>>> descriptor at addr 3 failed! > >>>> Mar 24 00:11:26 HP kernel: ugen0.3: <Mitsumi> at usbus0 > >>>> Mar 24 00:11:26 HP kernel: umass0: <Mitsumi MITSUMI USB FDD 061M, > >>>> class 0/0, rev 1.10/2.00, addr 3> on usbus0 > >>>> Mar 24 00:11:26 HP kernel: umass0: SCSI over Bulk-Only; quirks = > >>>> 0x0100 > >>> > >>> > >>> ^^^^ Edit /sys/dev/usb/storage/umass.c > >>> > >>> And remove the quirk entry for your device. Maybe it is not correct. > >> > >> I delete UMASS_PROTO_SCSI. > >> But: > >> Mar 28 17:44:01 HP kernel: usb2_alloc_device:1516: getting device > >> descriptor at addr 3 failed! > >> Mar 28 17:44:02 HP kernel: usb2_req_re_enumerate:1434: getting device > >> descriptor at addr 3 failed! > >> Mar 28 17:44:03 HP kernel: usb2_req_re_enumerate:1434: getting device > >> descriptor at addr 3 failed! > >> Mar 28 17:44:03 HP kernel: ugen0.3: <> at usbus0 (disconnected) > >> Mar 28 17:44:03 HP kernel: uhub_reattach_port:413: could not allocate > >> new device! > > > > What happens if you use an external HUB to connect the device ? > > I do not have external hub =) > I have two ports in laptop - that will be enough =) Before your device attached in one of the ports, and now after you removed the quirk? --HPSReceived on Sat Mar 28 2009 - 14:19:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:45 UTC