在 Tue, 05 May 2009 16:40:53 +0800，Hans Petter Selasky <hselasky_at_c2i.net> 写道: > sysctl hw.usb2.uhci.debug=15 This is my dmesg in attchement. -- The Power to Serve Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #5: Tue May 5 14:05:24 CST 2009 root_at_currentpark.intra.umessage.com.cn:/usr/obj/usr/src/sys/UMESSAGE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1795.51-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 1073741824 (1024 MB) avail memory = 1012195328 (965 MB) ACPI APIC Table: <DELL B8K > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 acpi0: <DELL B8K > on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f00000 (3) failed acpi0: reservation of 1000000, 3e5ffc00 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xecb8-0xecbf mem 0xfea00000-0xfeafffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel Q965 SVGA controller> on vgapci0 agp0: detected 7676k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 2.1 on pci0 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xff00-0xff1f irq 17 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f10 usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe9fbc00-0xfe9fbfff irq 22 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: waiting for BIOS to give up control usbus2: EHCI version 1.0 usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xb002> mem 0xfe6f0000-0xfe6fffff irq 16 at device 0.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:1a:a0:e1:31:eb bge0: [ITHREAD] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xff80-0xff9f irq 23 at device 29.0 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0000 usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xff60-0xff7f irq 17 at device 29.1 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0000 usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0000 usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfec0-0xfecf,0xecc0-0xeccf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ICH8 SATA300 controller> port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf,0xecd0-0xecdf irq 20 at device 31.5 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xccfff,0xcd000-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 uhci_interrupt: host system error usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ad0: 152587MB <Seagate ST3160815AS 4.ADA> at ata0-master SATA300 uhci_interrupt: host system error ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 GEOM: ad0: geometry does not match label (255h,63s != 16h,63s). GEOM_LABEL: Label for provider ad0a is ufsid/49f98454ff52b98f. GEOM_LABEL: Label for provider ad0a is ufs/root. GEOM_LABEL: Label for provider ad0d is ufsid/49f9845b4cbc1341. GEOM_LABEL: Label for provider ad0d is ufs/var. GEOM_LABEL: Label for provider ad0e is ufsid/49f98455b2c7e9e5. GEOM_LABEL: Label for provider ad0e is ufs/tmp. GEOM_LABEL: Label for provider ad0f is ufsid/49f9845405ff03de. GEOM_LABEL: Label for provider ad0f is ufs/home. GEOM_LABEL: Label for provider ad0g is ufsid/49f98456bbb9c493. GEOM_LABEL: Label for provider ad0g is ufs/usr. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered acd0: DVDROM <TSSTcorpDVD-ROM TS-H353B/D200> at ata1-master SATA150 lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! Root mount waiting for: usbus6 Trying to mount root from ufs:/dev/ufs/root GEOM_LABEL: Label ufsid/49f98454ff52b98f removed. GEOM_LABEL: Label ufsid/49f9845405ff03de removed. GEOM_LABEL: Label ufsid/49f98455b2c7e9e5 removed. GEOM_LABEL: L <11a8>/dev/ufs/home: FILE SYSTEM CLEbAN; SKIPPING CHECKS el ufsid/49f98456bbb9c493 removed. GEOM_LABEL: Label ufsid/49f9845b4c 13 41 removed. ugen4.2: <Dell> at usbus4 ukbd0: <Dell product 0x2105, class 0/0, rev 1.10/3.52, addr 2> on usbus4 kbd2 at ukbd0 bge0: link state changed to UP uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0010 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=16 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x03 wLen=0x0000 wValue=0x0004 wIndex=0x0002 uhci_portreset:2396: Activating SOFs! uhci_interrupt: host system error uhci_interrupt:1461: uhci_interrupt: host controller halted uhci_dumpregs:696: usbus1 regs: cmd=0080, sts=0028, intr=000f, frnum=0010, flbase=00000040, sof=0040, portsc1=0080, portsc2=0181 uhci_dump_qh:769: QH(0xffffff00013df800) at 0x013df802: h_next=0x013df782 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df780) at 0x013df782: h_next=0x013df702 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df700) at 0x013df702: h_next=0x013df682 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df680) at 0x013df682: h_next=0x00000001 e_next=0x013df600 uhci_portreset:2411: uhci port 2 reset, status0 = 0x0280 uhci_portreset:2428: uhci port 2 reset, status1 = 0x0183 uhci_portreset:2441: uhci port 2 iteration 0, status = 0x0187 uhci_portreset:2441: uhci port 2 iteration 1, status = 0x0185 uhci_portreset:2479: uhci port 2 reset, status2 = 0x0185 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0014 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=20 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_pipe_init:3043: pipe=0xffffff0001a208d8, addr=0, endpt=0, mode=0 (1) uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 1. uhci_setup_standard_chain:1666: addr=0 endpt=0 sumlen=8 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff000168ad00) at 0x0168ad04 = link=0x00000001 status=0x1d8003ff token=0x00e0002d buffer=0x286f6260 TD(0xffffff000168ad00) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=2d,addr=0,endpt=0,D=0,maxlen=8 _uhci_append_qh:923: 0xffffff0001b3ab00 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_interrupt: host system error uhci_interrupt:1461: uhci_interrupt: host controller halted uhci_dumpregs:696: usbus1 regs: cmd=0080, sts=0028, intr=000f, frnum=0010, flbase=00000040, sof=0040, portsc1=0080, portsc2=0185 uhci_dump_qh:769: QH(0xffffff0001b3ab00) at 0x01b3ab02: h_next=0x013df782 e_next=0x0168ad04 uhci_dump_qh:769: QH(0xffffff00013df780) at 0x013df782: h_next=0x013df702 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df700) at 0x013df702: h_next=0x013df682 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df680) at 0x013df682: h_next=0x00000001 e_next=0x013df600 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001b3ab00 from 0xffffff0001b3ab00 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001b3ab00 from 0xffffff00013df800 usb2_alloc_device:1574: set address 2 failed (USB_ERR_TIMEOUT, ignored) uhci_setup_standard_chain:1666: addr=2 endpt=0 sumlen=16 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff000168ad00) at 0x0168ad04 = link=0x0168acc4 status=0x1c8003ff token=0x00e0022d buffer=0x286f6260 TD(0xffffff000168ad00) td_next=-VF td_status=-ACTIVE-LS, errcnt=3, actlen=0 pid=2d,addr=2,endpt=0,D=0,maxlen=8 TD(0xffffff000168acc0) at 0x0168acc4 = link=0x0168ac84 status=0x3c8003ff token=0x00e80269 buffer=0x286f6268 TD(0xffffff000168acc0) td_next=-VF td_status=-ACTIVE-LS-SPD, errcnt=3, actlen=0 pid=69,addr=2,endpt=0,D=1,maxlen=8 TD(0xffffff000168ac80) at 0x0168ac84 = link=0x00000001 status=0x1d8003ff token=0xffe802e1 buffer=0x00000000 TD(0xffffff000168ac80) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=e1,addr=2,endpt=0,D=1,maxlen=0 _uhci_append_qh:923: 0xffffff0001d40480 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001d40480 from 0xffffff0001d40480 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001d40480 from 0xffffff00013df800 usb2_alloc_device:1612: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT! uhci_roothub_exec:2514: type=0x23 request=0x03 wLen=0x0000 wValue=0x0004 wIndex=0x0002 uhci_portreset:2396: Activating SOFs! uhci_interrupt: host system error uhci_interrupt:1461: uhci_interrupt: host controller halted uhci_dumpregs:696: usbus1 regs: cmd=0080, sts=0028, intr=000f, frnum=0010, flbase=00000040, sof=0040, portsc1=0080, portsc2=0185 uhci_dump_qh:769: QH(0xffffff00013df800) at 0x013df802: h_next=0x013df782 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df780) at 0x013df782: h_next=0x013df702 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df700) at 0x013df702: h_next=0x013df682 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df680) at 0x013df682: h_next=0x00000001 e_next=0x013df600 uhci_portreset:2411: uhci port 2 reset, status0 = 0x0288 uhci_portreset:2428: uhci port 2 reset, status1 = 0x018b uhci_portreset:2441: uhci port 2 iteration 0, status = 0x018f uhci_portreset:2441: uhci port 2 iteration 1, status = 0x0185 uhci_portreset:2479: uhci port 2 reset, status2 = 0x0185 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0014 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=20 uhci_setup_standard_chain:1666: addr=0 endpt=0 sumlen=8 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff0001717100) at 0x01717104 = link=0x00000001 status=0x1d8003ff token=0x00e0002d buffer=0x286f6260 TD(0xffffff0001717100) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=2d,addr=0,endpt=0,D=0,maxlen=8 _uhci_append_qh:923: 0xffffff0001d41380 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001d41380 from 0xffffff0001d41380 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001d41380 from 0xffffff00013df800 usb2_req_re_enumerate:1519: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) uhci_setup_standard_chain:1666: addr=2 endpt=0 sumlen=16 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff00013ee900) at 0x013ee904 = link=0x013ee8c4 status=0x1c8003ff token=0x00e0022d buffer=0x286f6260 TD(0xffffff00013ee900) td_next=-VF td_status=-ACTIVE-LS, errcnt=3, actlen=0 pid=2d,addr=2,endpt=0,D=0,maxlen=8 TD(0xffffff00013ee8c0) at 0x013ee8c4 = link=0x013ee884 status=0x3c8003ff token=0x00e80269 buffer=0x286f6268 TD(0xffffff00013ee8c0) td_next=-VF td_status=-ACTIVE-LS-SPD, errcnt=3, actlen=0 pid=69,addr=2,endpt=0,D=1,maxlen=8 TD(0xffffff00013ee880) at 0x013ee884 = link=0x00000001 status=0x1d8003ff token=0xffe802e1 buffer=0x00000000 TD(0xffffff00013ee880) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=e1,addr=2,endpt=0,D=1,maxlen=0 _uhci_append_qh:923: 0xffffff0001d41280 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001d41280 from 0xffffff0001d41280 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001d41280 from 0xffffff00013df800 usb2_req_re_enumerate:1533: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT! uhci_roothub_exec:2514: type=0x23 request=0x03 wLen=0x0000 wValue=0x0004 wIndex=0x0002 uhci_portreset:2396: Activating SOFs! uhci_interrupt: host system error uhci_interrupt:1461: uhci_interrupt: host controller halted uhci_dumpregs:696: usbus1 regs: cmd=0080, sts=0028, intr=000f, frnum=0010, flbase=00000040, sof=0040, portsc1=0080, portsc2=0185 uhci_dump_qh:769: QH(0xffffff00013df800) at 0x013df802: h_next=0x013df782 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df780) at 0x013df782: h_next=0x013df702 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df700) at 0x013df702: h_next=0x013df682 e_next=0x00000001 uhci_dump_qh:769: QH(0xffffff00013df680) at 0x013df682: h_next=0x00000001 e_next=0x013df600 uhci_portreset:2411: uhci port 2 reset, status0 = 0x0288 uhci_portreset:2428: uhci port 2 reset, status1 = 0x018b uhci_portreset:2441: uhci port 2 iteration 0, status = 0x018f uhci_portreset:2441: uhci port 2 iteration 1, status = 0x0185 uhci_portreset:2479: uhci port 2 reset, status2 = 0x0185 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0014 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=20 uhci_setup_standard_chain:1666: addr=0 endpt=0 sumlen=8 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff00013f0500) at 0x013f0504 = link=0x00000001 status=0x1d8003ff token=0x00e0002d buffer=0x286f6260 TD(0xffffff00013f0500) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=2d,addr=0,endpt=0,D=0,maxlen=8 _uhci_append_qh:923: 0xffffff0001d40200 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001d40200 from 0xffffff0001d40200 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001d40200 from 0xffffff00013df800 usb2_req_re_enumerate:1519: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) uhci_setup_standard_chain:1666: addr=2 endpt=0 sumlen=16 speed=1 uhci_setup_standard_chain:1827: nexttog=0; data before transfer: TD(0xffffff0001440100) at 0x01440104 = link=0x014400c4 status=0x1c8003ff token=0x00e0022d buffer=0x286f6260 TD(0xffffff0001440100) td_next=-VF td_status=-ACTIVE-LS, errcnt=3, actlen=0 pid=2d,addr=2,endpt=0,D=0,maxlen=8 TD(0xffffff00014400c0) at 0x014400c4 = link=0x01440084 status=0x3c8003ff token=0x00e80269 buffer=0x286f6268 TD(0xffffff00014400c0) td_next=-VF td_status=-ACTIVE-LS-SPD, errcnt=3, actlen=0 pid=69,addr=2,endpt=0,D=1,maxlen=8 TD(0xffffff0001440080) at 0x01440084 = link=0x00000001 status=0x1d8003ff token=0xffe802e1 buffer=0x00000000 TD(0xffffff0001440080) td_next=-T td_status=-ACTIVE-IOC-LS, errcnt=3, actlen=0 pid=e1,addr=2,endpt=0,D=1,maxlen=0 _uhci_append_qh:923: 0xffffff0001b3ac80 to 0xffffff00013df800 uhci_check_transfer:1391: xfer=0xfffffffe406f6148 is still active uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_timeout:1498: xfer=0xfffffffe406f6148 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=20 _uhci_remove_qh:979: 0xffffff0001b3ac80 from 0xffffff0001b3ac80 uhci_device_done:1848: xfer=0xfffffffe406f6148, pipe=0xffffff0001a208d8, error=5 _uhci_remove_qh:979: 0xffffff0001b3ac80 from 0xffffff00013df800 usb2_req_re_enumerate:1533: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT! ugen1.2: <> at usbus1 (disconnected) uhub_reattach_port:417: could not allocate new device! uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0001 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=1 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_roothub_exec:2514: type=0x23 request=0x01 wLen=0x0000 wValue=0x0010 wIndex=0x0002 uhci_roothub_exec:2624: UR_CLEAR_PORT_FEATURE port=2 feature=16 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 3. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3200: Some USB transfer is active on 4. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 5. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 0. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002 uhci_set_hw_power:3182: uhci_set_hw_power:3204: Power save on 1. uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 uhci_roothub_exec:2514: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0002Received on Tue May 05 2009 - 07:05:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:47 UTC