On Friday 22 May 2009 11:01:09 pm Pyun YongHyeon wrote: > Yukon Extreme uses the new descriptor format, the same as Yukon > FE+, so you should have 88E8072 use that. I guess it wouldn't be > hard to add support for Yukon Extreme once msk(4) got working code > for Yukon FE+. I saw you committed this over the weekend, so I will updated my patches to account for this. So far I have only had two issues: 1) TSO is broken. However, this is probably due to the descriptor format. I will try it again after merging in the FE+ changes. 2) I was getting RX overrun errors when pulling data over gige (at work) (pulling data == using csup to download the CVS repository for the first time). It would die with an RX overrun every few minutes. It required an ifconfig down/up to recover. (It would be nice if the driver recovered from an RX overrun better perhaps.) At home I only have a 10/100 network and the driver worked fine (finished full csup w/o any RX overruns) at 100. I will also see if I can still reproduce this after merging in the FE+ changes over the weekend. -- John BaldwinReceived on Tue May 26 2009 - 12:59:08 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:48 UTC