Re: [Call For Testing] VirtualBox for FreeBSD! take 4

Martin Wilke wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 
> Howdy,
[...]
> 
> Happy Testing :-)
[...]

I've successfully migrated two Microsoft Windows 2003 Server Standard 
x64 Edition SP2 testing machines (running MS IIS, MS SQL Server and an 
inhouse application) from VMWare Server 1.0.9 on Wintel to 
virtualbox-2.2.2r1985 on a freshly installed FreeBSD/amd64 7.2-RELEASE 
with sources as of the day before yesterday.

I'm using "Internal network" to connect both machines, and so far 
VirtualBox played nicely during my 24 hour testing run.


As this is a lab machine, I'm in a position to fiddle with it at will; 
just tell me what you'd like to see tested, if anything.


CPU is an AMD Athlon X2 Dual Core (4850e), 8GB RAM, mainboard is a MSI 
K9N Neo V3 and the graphics card is an ATI X550.

I've attached the dmesg.


Thank you for bringing VirtualBox to FreeBSD !


MfG CoCo


Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat May 30 22:08:10 CEST 2009
    root_at_amd64.c0c0.intra:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Processor model unknown (2487.35-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  TSC: P-state invariant
  Cores per package: 2
usable memory = 8576651264 (8179 MB)
avail memory  = 8275107840 (7891 MB)
ACPI APIC Table: <112007 APIC1437>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <112007 RSDT1437> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, fed40000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe8ff000-0xfe8fffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8fec00-0xfe8fecff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on uhub1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/18.00, addr 3> on uhub2
ums0: 6 buttons and Z dir.
ukbd0: <vendor 0x046a product 0x0001, class 0/0, rev 1.00/9.08, addr 4> on uhub2
kbd2 at ukbd0
pci0: <multimedia, HDA> at device 7.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xfe9ffc00-0xfe9ffc7f irq 16 at device 10.0 on pci1
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:d1:dc:9a
xl0: [ITHREAD]
atapci0: <nVidia nForce MCP65 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia ATA controller> port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xa800-0xa80f mem 0xfe8fc000-0xfe8fdfff irq 20 at device 10.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 17 at device 0.0 on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1d:92:84:e5:8b
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfebf0000-0xfebfffff irq 18 at device 0.0 on pci4
vgapci1: <VGA-compatible display> mem 0xfebe0000-0xfebeffff at device 0.1 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <DVD-ROM 16X/5.FV> at ata0-slave UDMA100
ad4: 70911MB <WDC WD740GD-00FLA0 21.08U21> at ata2-master UDMA33
GEOM_LABEL: Label for provider ad4 is ufsid/480d2ea502086cea.
ad6: 476940MB <SAMSUNG HD502IJ 1AA01112> at ata3-master UDMA33
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad4s1a is ufsid/49f799813ea0cd84.
GEOM_LABEL: Label for provider ad4s1d is ufsid/49f79982611d27c6.
GEOM_LABEL: Label for provider ad4s1e is ufsid/49f799812c579861.
GEOM_LABEL: Label for provider ad4s1f is ufsid/49f79982e4f05972.
GEOM_LABEL: Label for provider ad4s1g is ufsid/49f79981ae90b18d.
GEOM_LABEL: Label for provider ad6s1a is ufsid/4a21796b43811700.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4a21798334fc09fb.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4a21796bcafd5289.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4a217981cae1eba9.
GEOM_LABEL: Label for provider ad6s1g is ufsid/4a21796bf2f7b23f.
Trying to mount root from ufs:/dev/ad6s1a
GEOM_LABEL: Label ufsid/4a21796b43811700 removed.
GEOM_LABEL: Label for provider ad6s1a is ufsid/4a21796b43811700.
GEOM_LABEL: Label ufsid/4a21796bcafd5289 removed.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4a21796bcafd5289.
GEOM_LABEL: Label ufsid/4a21796bf2f7b23f removed.
GEOM_LABEL: Label for provider ad6s1g is ufsid/4a21796bf2f7b23f.
GEOM_LABEL: Label ufsid/4a217981cae1eba9 removed.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4a217981cae1eba9.
GEOM_LABEL: Label ufsid/4a21798334fc09fb removed.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4a21798334fc09fb.
GEOM_LABEL: Label ufsid/4a21796b43811700 removed.
GEOM_LABEL: Label ufsid/4a21796bcafd5289 removed.
GEOM_LABEL: Label ufsid/4a21796bf2f7b23f removed.
GEOM_LABEL: Label ufsid/4a217981cae1eba9 removed.
GEOM_LABEL: Label ufsid/4a21798334fc09fb removed.
re0: link state changed to UP
GEOM_LABEL: Label ufsid/480d2ea502086cea removed.
GEOM_LABEL: Label ufsid/49f79981ae90b18d removed.
GEOM_LABEL: Label ufsid/49f79982e4f05972 removed.
GEOM_LABEL: Label ufsid/49f799812c579861 removed.
GEOM_LABEL: Label ufsid/49f79982611d27c6 removed.
GEOM_LABEL: Label ufsid/49f799813ea0cd84 removed.
GEOM_LABEL: Label for provider ad4 is ufsid/480d2ea502086cea.
GEOM_LABEL: Label ufsid/480d2ea502086cea removed.
GEOM_LABEL: Label for provider ad4 is ufsid/480d2ea502086cea.
GEOM_LABEL: Label for provider ad4s1 is ufsid/4a22affdfa67615f.
GEOM_LABEL: Label ufsid/480d2ea502086cea removed.
GEOM_LABEL: Label ufsid/4a22affdfa67615f removed.
GEOM_LABEL: Label for provider ad4 is ufsid/480d2ea502086cea.
GEOM_LABEL: Label for provider ad4s1 is ufsid/4a22affdfa67615f.
GEOM_LABEL: Label ufsid/480d2ea502086cea removed.
GEOM_LABEL: Label ufsid/4a22affdfa67615f removed.
drm0: <ATI Radeon RV370 X550> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]