Hello All, today i have upgrade my workstation from 7.2-release to 8.0-release with "freebsd-upgrade" and i wanted to test usb. For that i mount a USB stick and without umount remove them. And my workstation is dead. I can not write on the consolle , and i must be reset the workstation Nov 24 17:19:10 moon root: Unknown USB device: vendor 0x1307 product 0x0163 bus uhub2 Nov 24 17:19:10 moon kernel: ugen2.2: <USBest Technology> at usbus2 Nov 24 17:19:10 moon kernel: umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus2 Nov 24 17:19:10 moon kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Nov 24 17:19:12 moon kernel: umass0:0:0:-1: Attached to scbus0 Nov 24 17:19:12 moon kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Nov 24 17:19:12 moon kernel: da0: <Ut163 USB2FlashStorage 0.00> Removable Direct Access SCSI-2 device Nov 24 17:19:12 moon kernel: da0: 40.000MB/s transfers Nov 24 17:19:12 moon kernel: da0: 490MB (1003520 512 byte sectors: 64H 32S/T 490C) Nov 24 17:19:12 moon kernel: GEOM: da0: partition 1 does not start on a track boundary. Nov 24 17:19:12 moon kernel: GEOM: da0: partition 1 does not end on a track boundary. Nov 24 17:19:31 moon kernel: ugen2.2: <USBest Technology> at usbus2 (disconnected) Nov 24 17:19:31 moon kernel: umass0: at uhub2, port 3, addr 2 (disconnected) Nov 24 17:19:31 moon kernel: (da0:umass-sim0:0:0:0): lost device Nov 24 17:19:31 moon kernel: (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0xa, scsi status == 0x0 Nov 24 17:19:31 moon kernel: (da0:umass-sim0:0:0:0): removing device entry Nov 24 17:19:40 moon kernel: g_vfs_done():da0s1[WRITE(offset=512, length=4096)]error = 6 Nov 24 17:19:55 moon login: ROOT LOGIN (root) ON ttyv1 Nov 24 17:21:58 moon console-kit-daemon[1262]: WARNING: Error waiting for native console 3 activation: Device not configured Nov 24 17:22:09 moon kernel: acpi0: suspend request ignored (not ready yet) Nov 24 17:22:09 moon kernel: acpi0: request to enter state S5 failed (err 6) what can i do ? i know not remove the stick without umount ! but i do this bad things only for test. Thenks much!Received on Tue Nov 24 2009 - 17:52:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:58 UTC