On Wed, Oct 21, 2009 at 9:44 AM, Alexander Motin <mav_at_freebsd.org> wrote: > Sam Fourman Jr. wrote: >> On Fri, Aug 28, 2009 at 8:02 AM, Andriy Gapon <avg_at_icyb.net.ua> wrote: >>> on 28/08/2009 15:53 Alexander Motin said the following: >>>> Andriy Gapon wrote: >>>>> Do smartmontools work with ada/ahci disks? >>>>> Any tweaks/hacks to make it possible? >>>> It needs new interface module. Somebody have to combine CAM API >>>> smartmontools interface module used for SCSI devices and ATA SMART commands. >>>> >>> So you mean it should practically be the same as existing ATA module, but instead >>> of ATA ioctl it should use cam(3)? >> >> This is a little OT, but can someone confirm if smartmontools works >> with SATA2 Drives? > > SATA2 is just another physical transport for ATA commands. SATA1/2 > completely compatible to PATA on command level. > > -- > Alexander Motin sorry then I will try again, I just installed the port and tried a simple command Ziggy# smartctl -i /dev/ad4s1 smartctl version 5.38 [i386-portbld-freebsd9.0] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. Ziggy# dmesg | grep ad4 ad4: 238475MB <Seagate ST3250820AS 3.AAD> at ata2-master SATA300 GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). Trying to mount root from ufs:/dev/ad4s1a SamReceived on Wed Oct 21 2009 - 12:47:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:57 UTC