My sincere apologies for the top post. When I looked at it, I couldn't believe I had done it. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman_at_es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 > Date: Fri, 11 Sep 2009 13:52:10 -0700 > From: "Kevin Oberman" <oberman_at_es.net> > Sender: owner-freebsd-current_at_freebsd.org > > I seem to be seeing the same thing with my ath 5212. As long as the SSID > is announced, it works like a champ, but my home system does not do so > and the wpa_supplicant does not work with it on V8. > > My config file: > ctrl_interface=/var/run/wpa_supplicant > ctrl_interface_group=wheel > ap_scan=1 > network={ > ssid="babcom" > scan_ssid=1 > key_mgmt=NONE > wep_key0=01234567890... > wep_tx_keyidx=0 > } > > Yes, I know I REALLY, REALLY, REALLY need to switch over to WPA. As soon > as I get some time. > > I added ap_scan since the V8.0 upgrade, but it is otherwise the > configuration that worked on V7.2. > > When the supplicant runs, I see the key and key index set on the > interface, fur the SSID remains blank. If I issue the command 'ifconfig > wlan0 ssid babcom', the card associates almost immediately. > -- > R. Kevin Oberman, Network Engineer > Energy Sciences Network (ESnet) > Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) > E-mail: oberman_at_es.net Phone: +1 510 486-8634 > Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 > > > Date: Sun, 06 Sep 2009 22:40:21 +0300 > > From: Borodin Oleg <ziggi_at_yandex.ru> > > Sender: owner-freebsd-current_at_freebsd.org > > > > > > Hi! > > > > wpa_supplicant "not found" AP without SSID in beacon packets. With same > > device and configuration, but FreeBSD7.2 - work without problems. > > > > uname: > > FreeBSD flashbsd.home 8.0-BETA3 FreeBSD 8.0-BETA3 #4 r196775: Thu Sep 3 > > 13:12:37 EEST 2009 > > ziggi_at_eee.home:/usr/obj/usr/src/sys/EEE04 i386 > > > > wireless device: > > ath0: <Atheros 5424/2424> mem 0xfbef0000-0xfbefffff irq 18 at device 0.0 > > on pci1 > > ath0_at_pci0:1:0:0: class=0x020000 card=0x10261a3b chip=0x001c168c > > rev=0x01 hdr=0x00 > > vendor = 'Atheros Communications Inc.' > > device = 'AR5006 family 802.11abg Wireless NIC' > > class = network > > subclass = ethernet > > > > Access point - Cisco 877w, IOS 12.4T8 > > > > ----------- Variant 1. SSID not send in beacon packets from Cisco access > > point - > > Cisco conf fragment : > > ! > > dot11 mbssid > > ! > > dot11 ssid WNET1 > > vlan 1 > > authentication open. > > authentication key-management wpa > > wpa-psk ascii 7 10682F4857474B2D2A > > ! > > dot11 ssid WNET2 > > vlan 2 > > authentication open. > > authentication key-management wpa > > wpa-psk ascii 7 15342D5D567A72020E > > ! > > dot11 ssid WNET3 > > vlan 3 > > authentication open. > > authentication key-management wpa > > wpa-psk ascii 7 0220220A595656076A > > ! > > > > Result FreeBSD8Beta3 wpa_suplicant & wlandebug: > > > > Starting AP scan (broadcast SSID) > > wlan0: ieee80211_ioctl_scanreq: flags 0x52 duration 0x7fffffff mindwell > > 0 maxdwe > > ll 0 nssid 0 > > wlan0: ieee80211_check_scan: active scan, append, nojoin, once > > wlan0: sta_pick_bss: no scan candidate > > wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0 > > maxdwell 0 > > , desired mode auto, append, nojoin, once > > wlan0: scan set 1g, 6g, 11g, 7g, 13g, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, > > 14b dwel > > l min 20ms max 200ms > > wlan0: scan_task: chan 3g -> 1g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 1 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: received beacon from 00:23:5e:75:f7:c0 rssi 45 > > wlan0: [00:23:5e:75:f7:c0] discard unhandled information element, id > > 133, len 30 <-------- ???? > > > > wlan0: [00:23:5e:75:f7:c0] discard beacon frame, for off-channel 3 > > wlan0: received beacon from 00:23:5e:75:f7:c2 rssi 44 > > wlan0: [00:23:5e:75:f7:c2] discard unhandled information element, id > > 133, len 30 > > > > wlan0: [00:23:5e:75:f7:c0] discard beacon frame, for off-channel 3 > > wlan0: received beacon from 00:23:5e:75:f7:c2 rssi 46 > > wlan0: [00:23:5e:75:f7:c2] discard unhandled information element, id > > 133, len 30 > > > > wlan0: [00:23:5e:75:f7:c2] discard beacon frame, for off-channel 3 > > wlan0: scan_task: chan 1g -> 6g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 6 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: scan_task: chan 6g -> 11g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: scan_task: chan 11g -> 7g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 7 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: scan_task: chan 7g -> 13g [passive, dwell min 20ms max 200ms] > > EAPOL: disable timer tick > > wlan0: scan_task: chan 13g -> 2g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 2 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: received beacon from 00:23:5e:75:f7:c1 rssi 56 > > wlan0: [00:23:5e:75:f7:c1] discard unhandled information element, id > > 133, len 30 > > ... > > [00:23:5e:75:f7:c1] new beacon on chan 3 (bss chan 3) 0x00 rssi 55 > > [00:23:5e:75:f7:c1] caps 0x431 bintval 100 erp 0x100 > > wlan0: received beacon from 00:23:5e:75:f7:c2 rssi 53 > > wlan0: [00:23:5e:75:f7:c2] discard unhandled information element, id > > 133, len 30 > > > > [00:23:5e:75:f7:c2] new beacon on chan 3 (bss chan 3) 0x00 rssi 53 > > [00:23:5e:75:f7:c2] caps 0x431 bintval 100 erp 0x100 > > wlan0: scan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms] > > wlan0: send probe req on channel 4 bssid ff:ff:ff:ff:ff:ff ssid "" > > wlan0: received beacon from 00:23:5e:75:f7:c2 rssi 52 > > wlan0: [00:23:5e:75:f7:c2] discard unhandled information element, id > > 133, len 30 > > ... > > Scan results: 3 > > CTRL-EVENT-SCAN-RESULTS > > Selecting BSS from priority group 0 > > Try to find WPA-enabled AP > > 0: 00:23:5e:75:f7:c1 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 1: 00:23:5e:75:f7:c2 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 2: 00:23:5e:75:f7:c0 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > Try to find non-WPA AP > > 0: 00:23:5e:75:f7:c1 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 1: 00:23:5e:75:f7:c2 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 2: 00:23:5e:75:f7:c0 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > No suitable AP found. <--------------------- > > Setting scan request: 5 sec 0 usec > > > > ---------------- 2 On _any_ SSID in beacon packet: > > > > dot11 ssid WNET1 > > vlan 1 > > authentication open > > authentication key-management wpa > > mbssid guest-mode <--------------------------- On SSID sending > > wpa-psk ascii 7 10682F4857474B2D2A > > ! > > dot11 ssid WNET2 > > vlan 2 > > authentication open > > authentication key-management wpa > > wpa-psk ascii 7 15342D5D567A72020E > > ! > > dot11 ssid WNET3 > > vlan 3 > > authentication open > > authentication key-management wpa > > wpa-psk ascii 7 0220220A595656076A > > ! > > > > Result wpa_supplicant: > > > > Received 0 bytes of scan results (3 BSSes) > > Scan results: 3 > > CTRL-EVENT-SCAN-RESULTS > > Selecting BSS from priority group 0 > > Try to find WPA-enabled AP > > 0: 00:23:5e:75:f7:c1 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 1: 00:23:5e:75:f7:c2 ssid='' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > skip - SSID mismatch > > 2: 00:23:5e:75:f7:c0 ssid='WNET1' wpa_ie_len=24 rsn_ie_len=0 caps=0x31 > > selected based on WPA IE > > selected WPA AP 00:23:5e:75:f7:c0 ssid='WNET1' > > <---------------------------------------- > > Trying to associate with 00:23:5e:75:f7:c0 (SSID='WNET1' freq=2422 MHz) > > Cancelling scan request > > > > > > > > /etc/wpa_upplicant.conf: > > # $Id$ > > ctrl_interface=/var/run/wpa_supplicant > > ctrl_interface_group=wheel > > #eapol_version=1 > > #ap_scan=1 > > fast_reauth=1 > > network={ > > ssid="WNET1" > > # scan_ssid=1 > > proto=RSN WPA > > key_mgmt=WPA-PSK > > pairwise=CCMP TKIP > > group=CCMP TKIP > > psk=8c23bb58a1a94b3b56b90d8f7422a29b18f495b517f33fc6728ff2a3ad4aae1f > > } > > #EOF > > > > -- > > > > Best regards, > > > > Borodin Oleg > > Kaliningrad,Russia > > ziggi_at_inbox.ru > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Fri Sep 11 2009 - 18:57:49 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:55 UTC