lagg + wlan0 boot timing (EBUSY)

Tracking 8/stable branch on this particular machine (although I do
have access to -current for testing as needed)  uname -a:

FreeBSD lagg 8.0-RC1 FreeBSD 8.0-RC1 #11 r197417: Wed Sep 23 01:05:15
EDT 2009     root_at_lagg:/usr/obj/usr/src/sys/GENERIC  amd64

I have been trying to track down a problem with my lagg connection
sometimes not properly enabling wlan as fallback on boot.  It would
work properly about 60% of the time.  The other times, it would fail
with SIOCSLAGGPORT: Device busy

Here is the relevant rc.conf entries:

ifconfig_bfe0="up"
wlans_iwn0="wlan0"
ifconfig_wlan0="WPA"
ifconfig_iwn0="ether 00:1c:23:98:2c:5d"
cloned_interfaces="lagg0"
ipv6_network_interfaces="lagg0"
ifconfig_lagg0="laggproto failover laggport bfe0 laggport wlan0 DHCP"
ipv6_enable="YES"

So, I turned on some logging of all ifconfig commands with timestamps
and stdout/stderr/returncode, and noticed this:

Wed Sep 23 01:39:56 EDT 2009 ifconfig: lagg0 create ;
;; Wed Sep 23 01:39:56 EDT 2009 lagg0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: -l ;
iwn0 bfe0 fwe0 fwip0 lo0 lagg0
;; Wed Sep 23 01:39:56 EDT 2009 -l rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: -l ;
iwn0 bfe0 fwe0 fwip0 lo0 lagg0
;; Wed Sep 23 01:39:56 EDT 2009 -l rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: lo0 inet 127.0.0.1 ;
;; Wed Sep 23 01:39:56 EDT 2009 lo0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: lo0 up ;
;; Wed Sep 23 01:39:56 EDT 2009 lo0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: iwn0 ether 00:1c:23:98:2c:5d ;
;; Wed Sep 23 01:39:56 EDT 2009 iwn0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: iwn0 up ;
;; Wed Sep 23 01:39:56 EDT 2009 iwn0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: wlan0 create wlandev iwn0 ;
;; Wed Sep 23 01:39:56 EDT 2009 wlan0 rc='0' end.
Wed Sep 23 01:39:56 EDT 2009 ifconfig: wlan0 ;
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:1c:23:98:2c:5d
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 Mhz 11b)
        country US authmode OPEN privacy OFF txpower 14 bmiss 10 scanvalid 60
        wme bintval 0
;; Wed Sep 23 01:39:56 EDT 2009 wlan0 rc='0' end.
Wed Sep 23 01:39:57 EDT 2009 ifconfig: lagg0 laggproto failover
laggport bfe0 laggport wlan0 ;
ifconfig.real: SIOCSLAGGPORT: Device busy
;; Wed Sep 23 01:39:57 EDT 2009 lagg0 rc='1' end.

So, I started looking at the /sys/net/if_lagg.c source, and found the
EBUSY response cases:

This one

/* New lagg port has to be in an idle state */
        if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
                return (EBUSY);

seems to be the culprit, but unfortunately, I'm not familiar enough
with the code to take this much further.  I did build a kernel without
this check, and everything seems to be fixed, but this is obviously
not a real fix to the problem.  So, I would say the fact that
wpa_supplicant is talking to wlan0 (trying to scan/associate/auth)
while lagg is trying to add wlan0 to the portlist is the timing issue.

I confirmed this behavior as follows:

ifconfig wlan0 destroy
ifconfig lagg0 destroy
ifconfig lagg0 create
ifconfig wlan0 create wlandev iwn0  & ; ifconfig lagg0 laggproto
failover laggport bfe0 laggport wlan0
results in:
ifconfig: SIOCSLAGGPORT: Device busy

Someone more clueful than me know of a correct way to fix this
contention issue ?
Want me to file a PR for tracking purposes ?

Thanks in advance.

--Dave H