On Fri, 2009-09-25 at 18:18 -0400, Daniel Eischen wrote: > On Fri, 25 Sep 2009, Joe Marcus Clarke wrote: > >> > >> I've rebuilt hald (hal-0.5.11_26) after checking out 8/stable under > >> /usr/src/sys. Same problem. A spin loop of poll/read, with /dev/usb > >> responding to poll() but not to read(). > > > > Insufficient. You need to be running on a world/kernel which are in > > sync with each other. You also need to make sure the libusb port is no > > longer installed, and that you have run "make delete-old" after the > > upgrade. Then rebuild hal. > > With regard to the libusb port problems, shouldn't the > ports prefer/configure to use libusb20 when it is present, > so that it wouldn't matter if libusb was installed or not? Hal will (must) use libusb20 on a newusb system. If the devel/libusb port is installed, hal will fail build. On oldusb, libusb is not used by hal, and hal doesn't care if it's present. Joe > -- PGP Key : http://www.marcuscom.com/pgp.asc
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:56 UTC