Re: USB 1.1 devs not working on ASUS K8VSE (x86) MB

On Thursday, December 09, 2010 11:21:41 am Tom Uffner wrote:
> I have a fairly recent Current system running on an ASUS K8V SE Deluxe MB.
> 
> It was a dual boot amd64/x86 system (until a few days ago when the drive
> w/ the amd64 partitions unexpectedly failed after only a week of use)
> 
> When running it as x86, USB 1.1 devices are not recognized by FreeBSD.
> They worked fine on the amd64 kernel built from the same code. both
> ohci and uhci are in the kernel even though they don't show up in dmesg.
> the devices in question (currently a 1.1 hub and a mouse) are both seen
> and activated by the BIOS but turned off once FreeBSD takes over.
> 
> I had the same problem with GENERIC kernels from the 9.0-current-201011
> snapshot, so it is not my kernel config.
> 
> the mouse also works fine on either x86 or amd64 when plugged into a
> USB 2.0 hub or a PS2 adapter. and both these devices worked w/ the x86
> kernel on the previous incarnation of this system with an ASUS A7N8X MB
> (NVIDIA chipset) so i suspect that the problem may be in the initialization
> code for the Via chipset.
> 
> thanks in advance for any help,
> tom
> 
> pci0: <serial bus, USB> at device 16.0 (no driver attached)
> pci0: <serial bus, USB> at device 16.1 (no driver attached)
> pci0: <serial bus, USB> at device 16.2 (no driver attached)
> pci0: <serial bus, USB> at device 16.3 (no driver attached)

Can you get pciconf -lv output for these four devices?

-- 
John Baldwin