Re: CAM verbosity (xpt_release_devq(0): requested 1 > present 0)

From: Marcel Moolenaar <xcllnt_at_mac.com>
Date: Tue, 02 Feb 2010 16:24:04 -0800
On Feb 2, 2010, at 3:39 PM, Alexander Motin wrote:

> Marcel Moolenaar wrote:
>> On Feb 2, 2010, at 2:32 PM, Alexander Motin wrote:
>>> Whether it is related or not, both issues definitely should be fixed.
>>> Could you give me an access to debug that system, or it is in use?
>> 
>> Unfortunately, I can't give you access to this machine.
> 
> What's about full verbose dmesg up to the first few errors?

OK boot -v
Entering /boot/kernel/kernel at 0xe000000004068000...
PAL Proc at 0xe00000003f800010
SAL Proc at 0xe00000003ff9b780, GP at 0xe00000003fe00000
SAL: AP wake-up vector: 0xff
Platform clock frequency 266108676 Hz
Processor ratio 1600/267, Bus ratio 1/1, ITC ratio 6/4
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
VHPT: address=0xe000000000200000, size=0x100000
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #65 r203328M: Tue Feb  2 16:06:29 PST 2010
    marcel_at_hob.lan.xcllnt.net:/usr/obj/nfs/freebsd/base/head/sys/HOB ia64
WARNING: WITNESS option enabled, expect reduced performance.
UNWIND: table added: base=e000000004000000, start=e0000000047ad408, end=e0000000047de9c8
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000004d44f80.
Preloaded elf module "/boot/kernel/zfs.ko" at 0xe000000004d45060.
Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xe000000004d45130.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xe000000004d45208.
UNWIND: table added: base=e000000004d30000, start=e000000004d32530, end=e000000004d326c8
UNWIND: table added: base=e000000004b26000, start=e000000004ce4130, end=e000000004ced910
CPU: Montecito (1595 Mhz Itanium 2)
  Origin = "GenuineIntel"  Revision = 7
  Features = 0x5<LB,AO>
real memory  = 8552701952 (8156 MB)
Physical memory chunk(s):
0x00480000 - 0x03ffffff, 62390272 bytes (7616 pages)
0x04d48000 - 0x3e67ffff, 965967872 bytes (117916 pages)
0x3fc00000 - 0x3fd75fff, 1531904 bytes (187 pages)
0x100000000 - 0x1f8865fff, 4169555968 bytes (508979 pages)
0x10040000000 - 0x100ff0e3fff, 3205382144 bytes (391282 pages)
0x100ff200000 - 0x100ff227fff, 163840 bytes (20 pages)
0x100ff802000 - 0x100ff923fff, 1187840 bytes (145 pages)
0x100ffc00000 - 0x100ffebdfff, 2875392 bytes (351 pages)
avail memory = 8368832512 (7981 MB)
FPSWA Revision = 0x10012, Entry = 0xe00000003e6ce050
Table 'FACP' at 0xe00000003fdf6c28
Table 'SPCR' at 0xe00000003fdf6d60
Table 'DBGP' at 0xe00000003fdf6db0
Table 'APIC' at 0xe00000003fdf71d0
	Local APIC address=0xfee00000
	Local APIC override entry
		Local APIC address=0xfee00000
	Local SAPIC entry
		ProcessorId=0x0, Id=0x0, Eid=0x0
	Local SAPIC entry
		ProcessorId=0x1, Id=0x1, Eid=0x0
	I/O SAPIC entry
		Id=0x0, InterruptBase=0x10, Address=0xfed20800
	I/O SAPIC entry
		Id=0x2, InterruptBase=0x1b, Address=0xfed24800
	I/O SAPIC entry
		Id=0x3, InterruptBase=0x26, Address=0xfed26800
	I/O SAPIC entry
		Id=0x6, InterruptBase=0x31, Address=0xfed2c800
	I/O SAPIC entry
		Id=0x7, InterruptBase=0x3c, Address=0xfed2e800
Table 'SPMI' at 0xe00000003fdf6de8
Table 'CPEP' at 0xe00000003fdf70a0
Table 'SSDT' at 0xe00000003fdf4738
Table 'SSDT' at 0xe00000003fdf4bf8
Table 'SSDT' at 0xe00000003fdf5058
Table 'SSDT' at 0xe00000003fdf58c8
Table 'SSDT' at 0xe00000003fdf6138
Table 'SSDT' at 0xe00000003fdf69a8
Table 'SSDT' at 0xe00000003fdf6ae8
MCA: allocated 65536 bytes for state info.
SMP: waking up cpu1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: ACPI Id=0, SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: ACPI Id=1, SAPIC Id=1, SAPIC Eid=0
ULE: setup cpu 0
ULE: setup cpu 1
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
nfslock: pseudo-device
ACPI: RSDP 0x3fde6000 00028 (v2     HP)
ACPI: XSDT 0x3fde602c 0008C (v1     HP   rx2660 00000000   HP 00000000)
ACPI: FACP 0x3fdf6c28 000F4 (v3     HP   rx2660 00000000   HP 00000000)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20100121/tbfadt-625)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20100121/tbfadt-625)
ACPI: DSDT 0x3fde61c8 0E566 (v1     HP   rx2660 00000007 INTL 20050309)
ACPI: FACS 0x3fdf6d20 00040
ACPI: SPCR 0x3fdf6d60 00050 (v1     HP          00000000   HP 00000000)
ACPI: DBGP 0x3fdf6db0 00034 (v1     HP   rx2660 00000000   HP 00000000)
ACPI: APIC 0x3fdf71d0 000A0 (v1     HP   rx2660 00000000   HP 00000000)
ACPI: SPMI 0x3fdf6de8 00050 (v4     HP   rx2660 00000000   HP 00000000)
ACPI: CPEP 0x3fdf70a0 00034 (v1     HP   rx2660 00000000   HP 00000000)
ACPI: SSDT 0x3fdf4738 004B3 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf4bf8 00456 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf5058 00866 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf58c8 00866 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf6138 00866 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf69a8 00138 (v1     HP   rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x3fdf6ae8 0013C (v1     HP   rx2660 00000006 INTL 20050309)
nexus0: registered as a time-of-day clock (resolution 1000us)
acpi0: <HP> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
ACPI timer: 0/7 1/1 1/1 0/4609 1/1 0/57 0/7 0/57 0/7 1/1 -> 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5d8004-0xff5d8007 on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x103c, dev=0x1303, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=ff-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0144, statreg=0x0290, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x103c, dev=0x1302, revid=0x00
	domain=0, bus=0, slot=1, func=1
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0146, statreg=0x0290, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[14]: type Memory, range 64, base 0x88034000, size 12, enabled
	map[1c]: type Prefetchable Memory, range 64, base 0x80080000000, size 17, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x103c, dev=0x1048, revid=0x00
	domain=0, bus=0, slot=1, func=2
	class=07-00-02, hdrtype=0x00, mfdev=1
	cmdreg=0x0146, statreg=0x0290, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[14]: type Memory, range 64, base 0x88033000, size 12, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x1033, dev=0x0035, revid=0x43
	domain=0, bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x88032000, size 12, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 17
found->	vendor=0x1033, dev=0x0035, revid=0x43
	domain=0, bus=0, slot=2, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
	intpin=b, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x88031000, size 12, enabled
pcib0: matched entry for 0.2.INTB
pcib0: slot 2 INTB hardwired to IRQ 18
found->	vendor=0x1033, dev=0x00e0, revid=0x04
	domain=0, bus=0, slot=2, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
	intpin=c, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x88030000, size  8, enabled
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 19
found->	vendor=0x1002, dev=0x515e, revid=0x02
	domain=0, bus=0, slot=3, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0187, statreg=0x0290, cachelnsz=32 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0x80000000, size 27, enabled
	map[14]: type I/O Port, range 32, base 0x1000, size  8, enabled
	map[18]: type Memory, range 32, base 0x88020000, size 16, enabled
pci0: <unknown> at device 1.0 (no driver attached)
pci0: <simple comms> at device 1.1 (no driver attached)
pci0: child uart0 reqpci0: child uart0 requested type 4 for rid 0x14, but the BAR suart0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff irq 16 at device 1.2 on pci0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (115200,n,8,1)
ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 on pci0
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1000, dev=0x0054, revid=0x01
	domain=0, bus=1, slot=1, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x14
	map[10]: type I/O Port, range 32, base 0x1000, size  8, enabled
	map[14]: type Memory, range 64, base 0xa0470000, size 14, enabled
	map[1c]: type Memory, range 64, base 0xa0460000, size 16, enabled
pcib1: matched entry for 1.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 27
found->	vendor=0x14e4, dev=0x1648, revid=0x10
	domain=0, bus=1, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=29
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xa0450000, size 16, enabled
pcib1: matched entry for 1.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 29
found->	vendor=0x14e4, dev=0x1648, revid=0x10
	domain=0, bus=1, slot=2, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=30
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xa0440000, size 16, enabled
pcib1: matched entry for 1.2.INTB
pcib1: slot 2 INTB hardwired to IRQ 30
mpt0: <LSILogic SAS/SATA Adapter> mem 0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1
mpt0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1100
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.16.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pci0:1:2:0: bad VPD cksum, remain 249
bge0: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x002100> mem 0xa0450000-0xa045ffff irq 29 at device 2.0 on pci1
bge0: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0019, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:17:a4:ab:91:2d
bge0: [MPSAFE]
bge0: [ITHREAD]
pci0:1:2:1: bad VPD cksum, remain 249
bge1: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x002100> mem 0xa0440000-0xa044ffff irq 30 at device 2.1 on pci1
bge1: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0019, rev. 0
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:17:a4:ab:91:2c
bge1: [MPSAFE]
bge1: [ITHREAD]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
uart1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 24 on acpi0
uart1: [FILTER]
uart1: fast interrupt
uart1: debug port (9600,n,8,1)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
Reducing kern.maxvnodes 262788 -> 100000
procfs registered
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 10.000 msec
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
(probe63:mpt0:1:0:0): Error 22, Unretryable error
(probe64:mpt0:1:1:0): Error 22, Unretryable error
(probe65:mpt0:1:2:0): Error 22, Unretryable error
(probe66:mpt0:1:3:0): Error 22, Unretryable error
(probe67:mpt0:1:4:0): Error 22, Unretryable error
(probe68:mpt0:1:5:0): Error 22, Unretryable error
(probe69:mpt0:1:6:0): Error 22, Unretryable error
(probe70:mpt0:1:7:0): Error 22, Unretryable error
(probe71:mpt0:1:8:0): Error 22, Unretryable error
(probe72:mpt0:1:9:0): Error 22, Unretryable error
pass0 at mpt0 bus 0 scbus0 target 7 lun 0
pass0: <HP DG146ABAB4 HPDA> Fixed Direct Access SCSI-5 device 
pass0: Serial Number 3NM057BF00009718AGZX
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: new disk da0
da0 at mpt0 bus 0 scbus0 target 7 lun 0
da0: <HP DG146ABAB4 HPDA> Fixed Direct Access SCSI-5 device 
da0: Serial Number 3NM057BF00009718AGZX
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
Root mount waiting for: usbus2
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus2
usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus2
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus2
usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus2
usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus2
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus2
usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
ugen2.2: <(null)> at usbus2 (disconnected)
uhub_reattach_port: could not allocate new device
Trying to mount root from ufs:da0p3
ct_to_ts([2010-02-03 00:16:32]) = 1265156192.000000000
start_init: trying /sbin/init
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Setting hostuuidusbd_req_r: 3d1cc772-d2ea-e_enumerate: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
11dc-89dc-0017a4ugen0.2: <(null)> at usbus0 (disconnected)
ab912d.
Setting hostid: 0x0737ecb8.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/da0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p3: clean, 12544699 free (55339 frags, 1561170 blocks, 0.3% fragmentation)
Mounting local file systems:WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
.
Setting hostname: hob.lan.xcllnt.net.
bge0: link state changed to DOWN
Starting Network: lo0 bge0 bge1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
	ether 00:17:a4:ab:91:2d
	media: Ethernet autoselect (none)
	status: no carrier
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
	ether 00:17:a4:ab:91:2c
bge1: link state changed to DOWN
	media: Ethernet autoselect (none)
	status: no carrier
Starting devd.
Starting Network: bge1.
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
	ether 00:17:a4:ab:91:2c
	media: Ethernet autoselect (none)
	status: no carrier
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
bge0: link UP
bge0: link state changed to UP
Waiting 30s for the default route interface: ....(bge0)
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/evolution/2.26 /usr/local/lib/gcc/ia64-portbld-freebsd9.0/3.4.6 /usr/local/lib/graphviz /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Setting date via ntp.
ts_to_ct(1265156211.365533028) = [2010-02-03 00:16:51]
 2 Feb 16:16:51 ntpdate[917]: step time server 192.168.4.1 offset 1.105587 sec
Starting rpcbind.
NFS access cache time=60
Setting NIS domain: xcllnt.
Starting ypbind.
Clearing /tmp.
Starting statd.
Starting lockd.
Recovering vi editor sessions:.
Starting ntpd.
Starting rwhod.
Starting squid.
Starting dbus.
Starting hald.
Starting gmond.
Starting gdm.
Starting avahi-daemon.
Starting avahi-dnsconfd.
Starting sshd.
Starting sendmail.
Starting cron.
Starting inetd.

Tue Feb  2 16:16:57 PST 2010

FreeBSD/ia64 (hob.lan.xcllnt.net) (ttyu0)

login: mpt0: QUEUE FULL EVENT: Bus 0x00 Target 0x07 Depth 120
xpt_release_devq(0): requested 1 > present 0
xpt_release_devq(0): requested 1 > present 0
xpt_release_devq(0): requested 1 > present 0
	*ad nauseam*

-- 
Marcel Moolenaar
xcllnt_at_mac.com
Received on Tue Feb 02 2010 - 23:24:26 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:00 UTC