Please try the driver as updated today and see if this still happens, I sure hope not. Cheers, Jack On Wed, Jan 27, 2010 at 11:29 AM, Mike Tancsa <mike_at_sentex.net> wrote: > > Not sure if the panic is related, but the watchdog timeout issue on bootup > seems to be repeatable on this motherboard with HEAD from last Friday. It > boots up fine under 6.x > > > FreeBSD 9.0-CURRENT #1: Fri Jan 22 16:43:53 EST 2010 > mdtancsa_at_ich10.sentex.ca:/usr/HEAD/obj/usr/HEAD/src/sys/alix i386 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) CPU E6500 _at_ 2.93GHz (0.00-MHz 686-class > CPU) > Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x400e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant > real memory = 2147483648 (2048 MB) > avail memory = 2089807872 (1992 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > kbd1 at kbdmux0 > cryptosoft0: <software crypto> on motherboard > acpi0: <PTLTD RSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci9: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9 > pci10: <ACPI PCI bus> on pcib3 > pci10: <mass storage, RAID> at device 1.0 (no driver attached) > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci13: <ACPI PCI bus> on pcib4 > em0: <Intel(R) PRO/1000 Network Connection 6.9.24> port 0x5000-0x501f mem > 0xe1000000-0xe101ffff irq 16 at device 0.0 on pci13 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:30:48:8d:2a:96 > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 > pci14: <ACPI PCI bus> on pcib5 > em1: <Intel(R) PRO/1000 Network Connection 6.9.24> port 0x6000-0x601f mem > 0xe1100000-0xe111ffff irq 17 at device 0.0 on pci14 > em1: Using MSI interrupt > em1: [FILTER] > em1: Ethernet address: 00:30:48:8d:2a:97 > uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f irq 23 > at device 29.0 on pci0 > uhci0: [ITHREAD] > usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 > uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f irq 19 > at device 29.1 on pci0 > uhci1: [ITHREAD] > usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 > uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 > at device 29.2 on pci0 > uhci2: [ITHREAD] > usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 > uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f irq 16 > at device 29.3 on pci0 > uhci3: [ITHREAD] > usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > 0xe0000000-0xe00003ff irq 23 at device 29.7 on pci0 > ehci0: [ITHREAD] > usbus4: EHCI version 1.0 > usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci15: <ACPI PCI bus> on pcib6 > vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem > 0xe8000000-0xefffffff,0xe1200000-0xe120ffff irq 16 at device 0.0 on pci15 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > uart0: console (9600,n,8,1) > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart1: [FILTER] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 6160b2506000616 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 6160b2506000616 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff pnpid > ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > IPsec: Initialized Security Association Processing. > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > SMP: AP CPU #1 Launched! > ugen0.1: <Intel> at usbus0 > ugen1.1: <Intel> at usbus1 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 > ugen2.1: <Intel> at usbus2 > ugen3.1: <Intel> at usbus3 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <Intel> at usbus4 > uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > uhub4: 8 ports with 8 removable, self powered > Trying to mount root from nfs: > NFS ROOT: 10.255.255.1:/usr/home/pxe9/ > em0: Watchdog timeout -- resetting > em0: link state changed to UP > Interface em0 IP-Address 10.255.255.118 Broadcast 10.255.255.255 > mount_nfs: can't update /var/db/mounttab for 10.255.255.1: > /usr/home/pxe9//etc > kernel trap 18 with interrupts disabled > > > Fatal trap 18: integer divide fault while in kernel mode > cpuid = 1; apic id = 01 > instruction pointer = 0x20:0xc0995f0b > stack pointer = 0x28:0xc4e746f8 > frame pointer = 0x28:0xc4e7476c > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = resume, IOPL = 0 > current process = 52 (ps) > trap number = 18 > panic: integer divide fault > cpuid = 1 > Uptime: 1m23s > Cannot dump. Device not defined or unavailable. > Automatic reboot in 15 seconds - press a key on the console to abort > > Fatal double fault: > eip = 0xc098e8d0 > esp = 0xc4d00000 > ebp = 0xc4d00020 > cpuid = 1; Rebooting... > apic id = 01 > cpu_reset: Stopping other CPUs > panic: double fault > cpuid = 1 > Uptime: 1m23s > Cannot dump. Device not defined or unavailable. > Automatic reboot in 15 seconds - press a key on the console to abort > Rebooting... > cpu_reset: Stopping other CPUs > > > -------------------------------------------------------------------- > Mike Tancsa, tel +1 519 651 3400 > Sentex Communications, mike_at_sentex.net > Providing Internet since 1994 www.sentex.net > Cambridge, Ontario Canada www.sentex.net/mike > >Received on Wed Jan 27 2010 - 18:58:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:00 UTC