Re: WARNING: Non-uniform processors.

From: Super Biscuit <super_bisquit_at_yahoo.com>
Date: Thu, 8 Jul 2010 11:13:31 -0700 (PDT)
--- On Thu, 7/8/10, Alex Keda <admin_at_lissyara.su> wrote:

From: Alex Keda <admin_at_lissyara.su>
Subject: WARNING: Non-uniform processors.
To: freebsd-current_at_freebsd.org
Date: Thursday, July 8, 2010, 4:42 PM

When booting, I have strange message.
All work OK (processor with hyperthreading, but system seems it as 1 CPU ).
lissyara-gp# dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r209745: Wed Jul  7 06:08:36 MSD 2010
    root_at_lissyara-gp.grand-prix:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3056.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Family = f  Model = 2  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>
real memory  = 1611137024 (1536 MB)
avail memory = 1559203840 (1486 MB)
Event timer "LAPIC" frequency 0 Hz quality 500
ACPI APIC Table: <COMPAQ BROOKDG >
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <COMPAQ CPQ0050> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G host to AGP bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xf4000000-0xf7ffffff,0xfc400000-0xfc40ffff irq 18 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xf8000000-0xfbffffff,0xfc410000-0xfc41ffff at device 0.1 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x3440-0x345f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x3460-0x347f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xfca00000-0xfca003ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib2
fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port 0x1000-0x103f mem 0xfc500000-0xfc500fff irq 20 at device 8.0 on pci5
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0b:cd:c0:b2:5e
fxp0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x34a0-0x34af irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <Intel ICH4 (82801DB)> port 0x3000-0x30ff,0x3400-0x343f mem 0xfca00400-0xfca005ff,0xfca00600-0xfca006ff irq 17 at device 31.5 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981A AC97 Codec>
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: [FILTER]
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: [FILTER]
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcd7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 3056869772 Hz quality 800
Starting kernel event timers: LAPIC _at_ 1000Hz, i8254 _at_ 128Hz
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ad1: 32254MB <WDC WD600AB-00BVA0 21.01H21> at ata0-slave UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
acd0: CDRW <TSST CDW/DVD TS-H492A/HB01> at ata1-master UDMA40
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub2: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad1s1a

_______________________________________________
freebsd-current_at_freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"



Compatible mode usually gives slower response. Unless you need it, don't run it.
I have a P4 2.8GHz. Same thing happens.

WITNESS seems to be a common part of current, especially with 9.0.
Received on Thu Jul 08 2010 - 16:13:33 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:05 UTC