On Thursday 03 June 2010 17:50:08 Hans Petter Selasky wrote: > On Thursday 03 June 2010 16:22:33 Marcelo/Porks wrote: > > On Wed, Jun 2, 2010 at 1:25 PM, Hans Petter Selasky <hselasky_at_c2i.net> > > wrote: > > > Hi, > > > > > > The problem is that LOW speed does not support BULK transfers according > > > to the USB specification. I guess we could switch that support on, > > > though I'd rather stick with the spec. > > > > > > Try changing this line in: > > > > > > src/sys/dev/usb/usb_transfer.c > > > > > > [USB_SPEED_LOW] = 0, /* not supported */ > > > Into: > > > > > > [USB_SPEED_LOW] = 8, /* not supported according to > > > USB spec. */ > > > > Hi, Thanks again for the reply. > > > > I changed this line [1], but the result was the same: > > Hi, > > You also need to update this structure above: > > [UE_BULK] = { > [USB_SPEED_LOW] = {.fixed = {0, 0, 0, 0}}, /* invalid > */ > > Change it into: > > 8, 8, 8, 8, > Oops, that seems to be some old code. Forget that patch. I will have another look. And you are sure you built a new kernel and usb module with the initial patch above? --HPSReceived on Thu Jun 03 2010 - 13:57:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:04 UTC