On Thu, Jun 3, 2010 at 12:57 PM, Hans Petter Selasky <hselasky_at_c2i.net> wrote: > On Thursday 03 June 2010 17:54:17 Hans Petter Selasky wrote: >> On Thursday 03 June 2010 17:50:08 Hans Petter Selasky wrote: >> > On Thursday 03 June 2010 16:22:33 Marcelo/Porks wrote: >> > > On Wed, Jun 2, 2010 at 1:25 PM, Hans Petter Selasky <hselasky_at_c2i.net> >> > >> > wrote: >> > > > Hi, >> > > > >> > > > The problem is that LOW speed does not support BULK transfers >> > > > according to the USB specification. I guess we could switch that >> > > > support on, though I'd rather stick with the spec. >> > > > >> > > > Try changing this line in: >> > > > >> > > > src/sys/dev/usb/usb_transfer.c >> > > > > > Hi, > > Should be like this: Note the structure is called "bulk_min": > > static const uint16_t bulk_min[USB_SPEED_MAX] = { > [USB_SPEED_LOW] = 8, > [USB_SPEED_FULL] = 8, > [USB_SPEED_HIGH] = 512, > [USB_SPEED_VARIABLE] = 512, > [USB_SPEED_SUPER] = 1024, > }; > --HPS Hi, This was what I changed at first. I tried in a FreeBSD current (Jun 3) and at 8.0-p3. At FreeBSD current I changed the line 3062. From: [USB_SPEED_LOW] = 0, /* not supported */ To: [USB_SPEED_LOW] = 8, Like you suggested I'll try to talk with you in #bsdusb at efnet Thank you! -- Marcelo Rossi "This e-mail is provided "AS IS" with no warranties, and confers no rights."Received on Thu Jun 03 2010 - 23:03:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:04 UTC