Weongyo Jeong wrote: > OK. The patch is ready to test. Could you please test it with attached > patch? your patch got rid of the "bwn0: unsupported rate 0" messages on my Dell Inspiron 1150. But it still gives me repeated: bwn0: RX decryption attempted (old 0 keyidx 0x1) and a few of the following: bwn0: need multicast update callback ts_to_ct(1274664456.824638117) = [2010-05-24 01:27:36] please let me know if there is anything you want me to test. Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #0: Sun May 16 00:05:17 EDT 2010 tom_at_zoe.uffner.com:/usr/obj/usr/src/sys/ZOE i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ab6000. Preloaded elf module "/boot/kernel/if_bwn.ko" at 0xc0ab6174. Preloaded elf module "/boot/kernel/siba_bwn.ko" at 0xc0ab6220. Preloaded elf module "/boot/modules/bwn_v4_ucode.ko" at 0xc0ab62d0. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2597803596 Hz CPU: Intel(R) Celeron(R) CPU 2.60GHz (2597.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Family = f Model = 2 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 128 KB, 2-way set associative, sectored cache, 64 byte line size real memory = 1073741824 (1024 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000003ec82fff, 1040568320 bytes (254045 pages) avail memory = 1040355328 (992 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xcfae pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: x86bios: IVT 0x000000-0x0004ff at 0xc0000000 x86bios: SSEG 0x010000-0x01ffff at 0xc3b74000 x86bios: EBDA 0x09f000-0x09ffff at 0xc009f000 x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000 ULE: setup cpu 0 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 'bwn_v4_ucode' version 0: 0 bytes loaded at 0xc0a8b808 firmware: 'bwn_v4_ucode5' version 0: 22384 bytes loaded at 0xc0a8b808 firmware: 'bwn_v4_ucode11' version 0: 29864 bytes loaded at 0xc0a90f78 firmware: 'bwn_v4_ucode13' version 0: 32232 bytes loaded at 0xc0a98420 firmware: 'bwn_v4_ucode14' version 0: 31384 bytes loaded at 0xc0aa0208 firmware: 'bwn_v4_ucode15' version 0: 30488 bytes loaded at 0xc0aa7ca0 firmware: 'bwn_v4_pcm5' version 0: 1320 bytes loaded at 0xc0aaf3b8 firmware: 'bwn_v4_a0g1initvals5' version 0: 1840 bytes loaded at 0xc0aaf8e0 firmware: 'bwn_v4_a0g0initvals5' version 0: 1840 bytes loaded at 0xc0ab0010 firmware: 'bwn_v4_b0g0initvals5' version 0: 1840 bytes loaded at 0xc0ab0740 firmware: 'bwn_v4_b0g0initvals13' version 0: 2080 bytes loaded at 0xc0ab0e70 firmware: 'bwn_v4_a0g1bsinitvals5' version 0: 158 bytes loaded at 0xc0ab1690 firmware: 'bwn_v4_a0g0bsinitvals5' version 0: 158 bytes loaded at 0xc0ab172e firmware: 'bwn_v4_b0g0bsinitvals5' version 0: 158 bytes loaded at 0xc0ab17cc firmware: 'bwn_v4_lp0initvals13' version 0: 3618 bytes loaded at 0xc0ab186a firmware: 'bwn_v4_lp0initvals14' version 0: 2064 bytes loaded at 0xc0ab268c firmware: 'bwn_v4_lp0initvals15' version 0: 2052 bytes loaded at 0xc0ab2e9c firmware: 'bwn_v4_lp0bsinitvals13' version 0: 158 bytes loaded at 0xc0ab36a0 firmware: 'bwn_v4_lp0bsinitvals14' version 0: 158 bytes loaded at 0xc0ab373e firmware: 'bwn_v4_lp0bsinitvals15' version 0: 158 bytes loaded at 0xc0ab37dc firmware: 'bwn_v4_n0bsinitvals11' version 0: 158 bytes loaded at 0xc0ab387a kbd: new array size 4 kbd1 at kbdmux0 nfslock: pseudo-device mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> io: <I/O> random: <entropy source, Software, Yarrow> ACPI: RSDP 0xfdf00 00014 (v0 DELL ) ACPI: RSDT 0x3fef0000 00028 (v1 DELL CPi R 27D50605 ASL 00000061) ACPI: FACP 0x3fef0400 00074 (v1 DELL CPi R 27D50605 ASL 00000061) ACPI: DSDT 0x3fef0c00 02594 (v1 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 0x3feff800 00040 npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc3b73000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80000050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 3fdf0000 (3) failed ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.2.INTA at func 0: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x3090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 domain=0, bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 domain=0, bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled map[14]: type Memory, range 32, base 0xf6f80000, size 19, enabled map[18]: type I/O Port, range 32, base 0xc000, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled map[14]: type Memory, range 32, base 0xf6f00000, size 19, enabled found-> vendor=0x8086, dev=0x24c2, revid=0x01 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 found-> vendor=0x8086, dev=0x24c4, revid=0x01 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xbf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 found-> vendor=0x8086, dev=0x24c7, revid=0x01 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 found-> vendor=0x8086, dev=0x24cd, revid=0x01 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf6effc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf6effc00 found-> vendor=0x8086, dev=0x2448, revid=0x81 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8880, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x01 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24c5, revid=0x01 domain=0, bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled map[14]: type I/O Port, range 32, base 0xcc40, size 6, enabled map[18]: type Memory, range 32, base 0xf6eff800, size 9, enabled map[1c]: type Memory, range 32, base 0xf6eff400, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x01 domain=0, bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc400, size 8, enabled map[14]: type I/O Port, range 32, base 0xc080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) vgapci0: <VGA-compatible display> port 0xc000-0xc007 mem 0xe8000000-0xefffffff,0xf6f80000-0xf6ffffff irq 11 at device 2.0 on pci0 agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000 vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xf6f80000 agp0: detected 892k stolen memory agp0: aperture size is 128M vgapci1: <VGA-compatible display> mem 0xe0000000-0xe7ffffff,0xf6f00000-0xf6f7ffff at device 2.1 on pci0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf6effc00-0xf6efffff irq 11 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0xd000-0xefff pcib1: memory decode 0xf8000000-0xfdffffff pcib1: no prefetched decode pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 2.4.INTA at func 0: 255 ACPI: Found matching pin for 2.2.INTA at func 0: 11 ACPI: Found matching pin for 2.1.INTA at func 0: 11 pci_link1: BIOS IRQ 11 for 2.1.INTA is invalid pci2: <ACPI PCI bus> on pcib1 pci2: domain=0, physical bus=2 found-> vendor=0x14e4, dev=0x4401, revid=0x01 domain=0, bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0810, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcffe000, size 13, enabled pcib1: requested memory range 0xfcffe000-0xfcffffff: good pcib1: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKB:0) pcib1: slot 1 INTA routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x14e4, dev=0x4320, revid=0x03 domain=0, bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfcffc000, size 13, enabled pcib1: requested memory range 0xfcffc000-0xfcffdfff: good pcib1: matched entry for 2.2.INTA (src \\_SB_.PCI0.LNKC:0) pcib1: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x104c, dev=0xac56, revid=0x00 domain=0, bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfcffe000-0xfcffffff irq 9 at device 1.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfcffe000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:11:43:69:8b:52 bfe0: [MPSAFE] bfe0: [ITHREAD] siba_bwn0: <Broadcom BCM4306 802.11b/g Wireless> mem 0xfcffc000-0xfcffdfff irq 11 at device 2.0 on pci2 siba_bwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfcffc000 bwn0 on siba_bwn0 bwn0: WLAN (chipid 0x4306 rev 5) PHY (analog 2 type 2 rev 2) RADIO (manuf 0x17f ver 0x2050 rev 2) bwn0: DMA (30 bits) bwn0: [MPSAFE] bwn0: [FILTER] bwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps bwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: <TI1510 PCI-CardBus Bridge> at device 4.0 on pci2 pcib1: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0xac56104c 0x02100007 0x06070000 0x00022008 0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x017f1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08405061 0x00000000 0x00000000 0x00001002 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH4 (82801DB)> port 0xc800-0xc8ff,0xcc40-0xcc7f mem 0xf6eff800-0xf6eff9ff,0xf6eff400-0xf6eff4ff irq 9 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xf6eff800 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xf6eff400 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1e1c000, 4000; 0xe43be000 -> 1e1c000 pcm0: sndbuf_setmap 1e20000, 4000; 0xe43c2000 -> 1e20000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00001000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices acpi_perf0: <ACPI CPU Frequency Control> on cpu0 device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 device_attach: acpi_perf0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ichss0: <SpeedStep ICH> on cpu0 ichss0: enabling SpeedStep support Device configuration finished. procfs registered Timecounter "TSC" frequency 2597803596 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 battery0: battery initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting UDMA33 acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4243N/A102> CDRW drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000001 ata1: New devices: 00000001 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad2: setting UDMA100 ad2: 28615MB <TOSHIBA MK3021GAS GA129D> at ata1-master UDMA100 ad2: 58605120 sectors [58140C/16H/63S] 16 sectors/interrupt 1 depth queue pcm0: measured ac97 link rate at 48017 Hz, will use 48000 Hz GEOM: new disk ad2 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/label/rootfs0 ct_to_ts([2010-05-24 01:27:19]) = 1274664439.000000000 start_init: trying /sbin/init wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:0b:7d:13:3f:ef bwn0: firmware version (rev 410 patch 2160 date 0x751a time 0x7c0a) wlan0: link state changed to UP bwn0: need multicast update callbackReceived on Mon May 24 2010 - 00:01:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:03 UTC