Hi IPv6 gurus: what are the CURRENT /etc/rc.conf incantations to do the following (which works): $ ifconfig gif0 create $ ifconfig gif0 tunnel 192.168.0.2 11.22.33.44 $ ifconfig gif0 inet6 2001:1111:2222:3333::2 2001:1111:2222:3333::1 prefixlen 128 $ route -n add -inet6 default 2001:1111:2222:3333::1 $ ifconfig gif0 up ... when my non-working setup in /etc/rc.conf contains gif_interfaces="gif0" gifconfig_gif0="192.168.0.2 11.22.33.44" gifconfig_gif0_ipv6="2001:1111:2222:3333::2 2001:1111:2222:3333::1 prefixlen 128" ipv6_defaultrouter="-inet6 default 2001:1111:2222:3333::1" ... which used to work. The bit that fails is the bit where gif0 gets its tunnel IPv6 addresses. I've tried both gifconfig_gif0_ipv6="..." and ifconfig_gif0_ipv6="...". The IPv6 endmpoints never make it onto gif0. This used to work, but setting up IPv6 in CURRENT is a moving target, and I can't find a working example any more. I've looked in /etc/defaults/rc.conf, but the gifN examples there are all devoid of any IPv6 examples. M -- Mark R V Murray Cert APS(Open) Dip Phys(Open) BSc Open(Open) BSc(Hons)(Open) Pi: 132511160Received on Fri Oct 15 2010 - 16:05:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:08 UTC