on 04/08/2011 23:34 kirk russell said the following: > I tried out the i386 9 Beta this week. I get a panic when I reboot. Are sure of that? Searching for word "panic" turns up nothing. > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2011 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16 UTC 2011 > root_at_obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > WARNING: WITNESS option enabled, expect reduced performance. > CPU: AMD Athlon(tm) Processor (1210.81-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x642 Family = 6 Model = 4 Stepping = 2 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!> > real memory = 1342177280 (1280 MB) > avail memory = 1291169792 (1231 MB) > kbd1 at kbdmux0 > acpi0: <ASUS A7V-133> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 4ff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0 > agp0: aperture size is 32M > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem > 0xe0000000-0xe3ffffff,0xd7000000-0xd700ffff irq 11 at device 0.0 on > pci1 > vgapci1: <VGA-compatible display> mem > 0xd8000000-0xdbffffff,0xd6800000-0xd680ffff at device 0.1 on pci1 > isab0: <PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686B UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 4.1 on > pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 15 at device > 4.3 on pci0 > usbus0: <VIA 83C572 USB controller> on uhci0 > pci0: <bridge> at device 4.4 (no driver attached) > ohci0: <NEC uPD 9210 USB controller> mem 0xd6000000-0xd6000fff irq 15 > at device 9.0 on pci0 > usbus1: <NEC uPD 9210 USB controller> on ohci0 > ohci1: <NEC uPD 9210 USB controller> mem 0xd5800000-0xd5800fff irq 11 > at device 9.1 on pci0 > usbus2: <NEC uPD 9210 USB controller> on ohci1 > ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd5000000-0xd50000ff > irq 10 at device 9.2 on pci0 > usbus3: EHCI version 1.0 > usbus3: <NEC uPD 720100 USB 2.0 controller> on ehci0 > atapci1: <VIA 6421 SATA150 controller> port > 0x9400-0x940f,0x9000-0x900f,0x8800-0x880f,0x8400-0x840f,0x8000-0x801f,0x7800-0x78ff > irq 12 at device 10.0 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > ata4: <ATA channel 2> on atapci1 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x7400-0x743f mem > 0xd4800000-0xd4800fff,0xd4000000-0xd40fffff irq 10 at device 11.0 on > pci0 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow > fxp0: Ethernet address: 00:04:ac:d3:7e:2f > ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7000-0x70ff mem > 0xd3800000-0xd3800fff irq 15 at device 13.0 on pci0 > aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > atapci2: <Promise PDC20265 UDMA100 controller> port > 0x6800-0x6807,0x6400-0x6403,0x6000-0x6007,0x5800-0x5803,0x5400-0x543f > mem 0xd3000000-0xd301ffff irq 10 at device 17.0 on pci0 > ata5: <ATA channel 0> on atapci2 > ata6: <ATA channel 1> on atapci2 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: console (9600,n,8,1) > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xd0000-0xd1fff,0xd4000-0xd47ff pnpid > ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ppc0: parallel port not found. > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > Timecounters tick every 1.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > ugen0.1: <VIA> at usbus0 > uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <NEC> at usbus1 > uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <NEC> at usbus2 > uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <NEC> at usbus3 > uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> onuhub3: > 5 ports with 5 removable, self powered > ada0 at ata5 bus 0 scbus6 target 0 lun 0 > ada0: <Maxtor 4G120J6 GAK819K0> ATA-6 device > ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) > ada0: 117246MB (240121728 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad10 > Timecounter "TSC" frequency 1210807637 Hz quality 800 > cd0 at ata0 bus 0 scbus0 target 0 lun 0 > cd0: <MATSHITA CD-ROM CR-583 AS10> Removable CD-ROM SCSI-0 device > cd0: 11.100MB/s transfers (PIO3, ATAPI 12bytes, PIO 65534bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > WARNING: WITNESS option enabled, expect reduced performance. > Trying to mount root from ufs:/dev/ada0p2 [rw]... > Setting hostuuid: 4f8e039c-bd4b-11e0-b710-0004acd37e2f. > Setting hostid: 0x4d98cc76. > Entropy harvesting: interrupts ethernet point_to_point kickstart. > Starting file system checks: > /dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ada0p2: clean, 28071737 free (529 frags, 3508901 blocks, 0.0% > fragmentation) > Mounting local file systems:. > Setting hostname: kleenex. > fxp0: link state changed to DOWN > Starting Network: lo0 fxp0. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3<RXCSUM,TXCSUM> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=9<RXCSUM,VLAN_MTU> > ether 00:04:ac:d3:7e:2f > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (none) > status: no carrier > Starting devd. > Starting Network: usbus0. > Starting Network: usbus1. > Starting Network: usbus2. > Starting Network: usbus3. > fxp0: link state changed to UP > fxp0: link state changed to DOWN > DHCPREQUEST on fxp0 to 255.255.255.255 port 67 > fxp0: link state changed to UP > DHCPREQUEST on fxp0 to 255.255.2fxp0: link state changed to DOWN > 55.255 port 67 > DHCPACK from 192.168.1.137 > bound to 192.168.1.81 -- renewal in 14400 seconds. > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > fxp0: link state changed to UP > Creating and/or trimming log files. > Starting syslogd. > No core dumps found. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout > Clearing /tmp (X related). > Recovering vi editor sessions:. > Updating motd:. > Starting ntpd. > Starting powerd. > Configuring syscons: keymap blanktime. > Starting sshd. > Starting cron. > Starting background file system checks in 60 seconds. > > Thu Aug 4 21:27:38 IST 2011 > > FreeBSD/i386 (kleenex) (ttyu0) > > login: root > Password: > Aug 4 21:27:42 kleenex login: ROOT LOGIN (root) ON ttyu0 > Last login: Thu Aug 4 21:21:41 on ttyu0 > FreeBSD 9.0-BETA1 (GENERIC) #0: Thu Jul 28 16:34:16 UTC 2011 > > Welcome to FreeBSD! > > Before seeking technical support, please use the following resources: > > o Security advisories and updated errata information for all releases are > at http://www.FreeBSD.org/releases/ - always consult the ERRATA section > for your release first as it's updated frequently. > > o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and, > along with the mailing lists, can be searched by going to > http://www.FreeBSD.org/search/. If the doc distribution has > been installed, they're also available formatted in /usr/share/doc. > > If you still have a question or problem, please take the output of > `uname -a', along with any relevant error messages, and email it > as a question to the questions_at_FreeBSD.org mailing list. If you are > unfamiliar with FreeBSD's directory layout, please refer to the hier(7) > manual page. If you are not familiar with manual pages, type `man man'. > > Edit /etc/motd to change this login announcement. > > You have new mail. > kleenex# uname -a > FreeBSD kleenex 9.0-BETA1 FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16 > UTC 2011 root_at_obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > i386 > kleenex# reboot > Aug 4 21:27:46 kleenex reboot: rebooted by root > Aug 4 21:27:46 kleenex syslogd: exiting on signal 15 > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...2 0 0 done > All buffers synced. > lock order reversal: > 1st 0xc50979e8 ufs (ufs) _at_ /usr/src/sys/kern/vfs_mount.c:1194 > 2nd 0xc5097e28 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2134 > KDB: stack backtrace: > db_trace_self_wrapper(c0ef3bfa,75735f73,632e7262,3331323a,ee000a34,...) > at db_trace_self_wrapper+0x26 > kdb_backtrace(c0a3d38b,c0ef7543,c4d3ebe8,c4d3eb18,ece479bc,...) at > kdb_backtrace+0x2a > _witness_debugger(c0ef7543,c5097e28,c0ede88b,c4d3eb18,c0eff221,...) at > _witness_debugger+0x25 > witness_checkorder(c5097e28,9,c0eff221,856,0,...) at witness_checkorder+0x839 > __lockmgr_args(c5097e28,80500,c5097e48,0,0,...) atstray irq7 > __lockmgr_args+0x804 > vop_stdlock(ece47adc,c0a4ebbb,c0edebb7,80500,c5097dd0,...) at vop_stdlock+0x62 > VOP_LOCK1_APV(c1012d00,ece47adc,c53580b0,c104d720,c5097dd0,...) at > VOP_LOCK1_APV+0xb5 > _vn_lock(c5097dd0,80500,c0eff221,856,8,...) at _vn_lock+0x5e > vget(c5097dd0,80500,c5358000,197,c5358000,...) at vget+0xb9 > devfs_allocv(c4ee2080,c522f000,80000,ece47b74,d8stray irq7 > 8,...) at devfs_allocv+0x105 > devfs_root(c522f000,80000,ece47bc0,4ef,ece47bf0,...) at devfs_root+0x52 > dounmount(c522f000,80000,c5358000,c4965c2c,0,...) at dounmount+0x421 > vfs_unmountall(c0eefb51,0,c0eefa9f,131,c5358000,...) at vfs_unmountall+0x4e > kern_reboot(0,0,c0eefa9f,b2,c5450b00,...) at kern_reboot+0x450 > reboot(c5358000,ece47cec,ece47d80,ece47c88,0,...) at reboot+0x6c > syscallenter(c5358000,ece47ce4,c0d34586,3,c1096ac0,...) at syscallenter+0x263 > syscall(ece47d28) at syscall+0x34 > Xint0x80_syscall() at Xint0x80_syscall+0x21 > --- syscall (55, FreeBSD ELF32, reboot), eip = 0x280b8f4b, esp = > 0xbfbfeb5c, ebp = 0xbfbfeca8 --- > Uptime: 1m10s > Rebooting... > > -- Andriy GaponReceived on Thu Aug 04 2011 - 19:31:24 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:16 UTC