On 8/4/2011 9:59 PM, Nenhum_de_Nos wrote: > hail, > > any info on what port multiplier I could buy to make the 4 port Sil3124 at > least make up to 8 ? I have used a number of PMs from http://www.addonics.com/. 8.x works great. eg. # camcontrol devlist <WDC WD1001FALS-00J7B1 05.00K05> at scbus0 target 0 lun 0 (pass0,ada0) <WDC WD1001FALS-00J7B1 05.00K05> at scbus0 target 1 lun 0 (pass1,ada1) <WDC WD1001FALS-00J7B1 05.00K05> at scbus0 target 2 lun 0 (pass2,ada2) <WDC WD1001FALS-00J7B1 05.00K05> at scbus0 target 3 lun 0 (pass3,ada3) <Port Multiplier 47261095 1f06> at scbus0 target 15 lun 0 (pass4,pmp0) <WDC WD2001FASS-00U0B0 01.00101> at scbus1 target 0 lun 0 (pass5,ada4) <WDC WD1501FASS-00W2B0 05.01D05> at scbus1 target 1 lun 0 (pass6,ada5) <WDC WD1501FASS-00W2B0 05.01D05> at scbus1 target 2 lun 0 (pass7,ada6) <WDC WD1501FASS-00W2B0 05.01D05> at scbus1 target 3 lun 0 (pass8,ada7) <WDC WD1501FASS-00W2B0 05.01D05> at scbus1 target 4 lun 0 (pass9,ada8) <Port Multiplier 47261095 1f06> at scbus1 target 15 lun 0 (pass10,pmp1) ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike_at_sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/Received on Fri Aug 05 2011 - 11:25:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:16 UTC