On 8/14/2011 3:50 PM, C. P. Ghost wrote: > I'm having a bunch of net4801 in production here, > and I was planning to move them to 9.0 soon after > RELEASE. So thanks for the heads up. I'll be holding > back now, and will stay with 8.2-STABLE. I netbooted an old 4801 box and it seems fine too. Testing the watchdog as well as the hifn that was in it and both seem to work just fine. 4801# dmesg Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-BETA1 #2: Sun Aug 14 19:15:05 EDT 2011 mdtancsa_at_ich10.sentex.ca:/usr/HEAD/obj/usr/HEAD/src/sys/ipsec i386 ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) module_register: module pci/xhci already exists! Module pci/xhci failed to register: 17 CPU: Geode(TM) Integrated Processor by National Semi (586-class CPU) Origin = "Geode by NSC" Id = 0x540 Family = 5 Model = 4 Stepping = 0 Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX> real memory = 134217728 (128 MB) avail memory = 116346880 (110 MB) kbd1 at kbdmux0 ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto> on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:00:24:c8:fa:e0 sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0 sis1: Silicon Revision: DP83816A miibus1: <MII bus> on sis1 nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1 nsphyter1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: Ethernet address: 00:00:24:c8:fa:e1 sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0 sis2: Silicon Revision: DP83816A miibus2: <MII bus> on sis2 nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2 nsphyter2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: Ethernet address: 00:00:24:c8:fa:e2 pci0: <processor> at device 14.0 (no driver attached) Geode Soekris net4801 comBIOS ver. 1.31 20070408 Copyright (C) 2000-2007 isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge> at device 18.1 (no driver attached) atapci0: <National Geode SC1100 ATA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 18.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 Timecounter "Geode" frequency 27000000 Hz quality 1000 pci0: <bridge> at device 18.5 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xa0010000-0xa0010fff irq 5 at device 19.0 on pci0 usbus0: <OHCI (generic) USB controller> on ohci0 cpu0 on motherboard pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 ppc0: parallel port not found. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Timecounters tick every 0.976 msec usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <0x0e11> at usbus0 uhub0: <0x0e11 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Root mount waiting for: usbus0 uhub0: 3 ports with 3 removable, self powered Trying to mount root from nfs: []... NFS ROOT: 10.255.255.1:/home/pxe9 hifn0 mem 0xa0003000-0xa0003fff,0xa0004000-0xa0005fff,0xa0008000-0xa000ffff irq 11 at device 14.0 on pci0 hifn0: Hifn 7955, rev 0, 32KB dram, pll=0x801<ext clk, 4x mult> 4801# And using /usr/src/tools/crypto/cryptostats % ssh -c 3des 10.255.255.60 "/home/mdtancsa/cryptostats" 241 symmetric crypto ops (0 errors, 0 times driver blocked) 0 key ops (0 errors, 0 times driver blocked) 0 crypto dispatch thread activations 0 crypto return thread activations % ssh -c 3des 10.255.255.60 "/home/mdtancsa/cryptostats" 271 symmetric crypto ops (0 errors, 0 times driver blocked) 0 key ops (0 errors, 0 times driver blocked) 0 crypto dispatch thread activations 0 crypto return thread activations Seems to be kicking the hifn card. -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike_at_sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/Received on Mon Aug 15 2011 - 19:23:52 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:16 UTC