Em 04/01/2011 13:05, John Baldwin escreveu: > On Tuesday, January 04, 2011 8:06:25 am Danilo G. Baio wrote: >> Hi guys, >> >> mfiutil don't show raid level right with Perc H700. >> Before to post i've read all /usr/src/usr.sbin/mfiutil >> and sorry, i dont have the knowledge for that. :( > > Can you get the output of 'mfiutil show debug' when compiled with DEBUG? > Sorry... i forgot to post. noname# ./mfiutil debug mfi0 Configuration (Debug): 3 arrays, 2 volumes, 0 spares array size: 288 volume size: 256 spare size: 40 array 0 of 2 drives: size = 975699968 drive 4 ONLINE raw size: 976773168 non-coerced size: 975724592 coerced size: 975699968 drive 5 ONLINE raw size: 976773168 non-coerced size: 975724592 coerced size: 975699968 array 1 of 2 drives: size = 285474816 drive 0 ONLINE raw size: 286749480 non-coerced size: 285700904 coerced size: 285474816 drive 1 ONLINE raw size: 286749480 non-coerced size: 285700904 coerced size: 285474816 array 2 of 2 drives: size = 285474816 drive 2 ONLINE raw size: 286749480 non-coerced size: 285700904 coerced size: 285474816 drive 3 ONLINE raw size: 286749480 non-coerced size: 285700904 coerced size: 285474816 volume mfid0 RAID-1 OPTIMAL <SO> primary raid level: 1 raid level qualifier: 0 secondary raid level: 0 stripe size: 7 num drives: 2 init state: 0 consistent: 1 no bgi: 0 spans: array 0 _at_ 0 : 975699968 volume mfid1 RAID-1 OPTIMAL <DADOS> primary raid level: 1 raid level qualifier: 0 secondary raid level: 0 stripe size: 7 num drives: 2 init state: 0 consistent: 1 no bgi: 0 spans: array 1 _at_ 0 : 285474816 array 2 _at_ 0 : 285474816 noname# I used this patch to compile with debug: http://lists.freebsd.org/pipermail/freebsd-hackers/attachments/20101004/52f0782c/fix-mfiutil-debug.obj -- Danilo G. Baio (dbaio)Received on Tue Jan 04 2011 - 14:26:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:10 UTC