13 июля 2011, 04:07 от YongHyeon PYUN <pyunyh_at_gmail.com>: > On Thu, Jun 30, 2011 at 10:19:14AM -0700, YongHyeon PYUN wrote: > > On Thu, Jun 30, 2011 at 02:44:48PM +0400, Andrey Smagin wrote: > > > I have card based on AX88772B. I tried patch axe driver for vendor and > device IDs. card detected, set up link, but no data received. What else need > for patch in this driver ? Anybody have datasheet ? > > > > ASIX requires a login account to get the data sheet so it's not > > publicly available to open source developers. > > AFAIK the difference between AX88772A and AX88772B is IPv4/IPv6 > > checksum offloading support of AX88772B. The introduction of > > checksum offloading means they might have changed its RX header > > format which in turn makes current RX handler to not work. The > > other difference would be more advanced power saving used in > > AX8877B but it wouldn't be much difference to axe(4) driver once > > PHY is correctly woken in initialization phase. > > Could you show me your diff and verbose boot output to know PHY > > model and EEPROM data? > > I have a minimal patch for AX88772B. It requires more work to > support TX/RX checksum offloading, flow-control and power saving > but attached patch would be enough for most cases. > Let me know whether it works or not. Great thanx !!! It work but I not tested under heavy load. Only ping and some Mbytes via nfs.Received on Wed Jul 20 2011 - 17:46:58 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:15 UTC