Hi Folks, I just attempted to update an HP385G0 system from current as of 4-15-2011 to 6-2-2011. The new system will not boot, and shows the following message when it hangs: pcib1:<ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff From a booting system, device 3.0 shows the following in dmesg: pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1 From reading other msgs that seem related to this problem, I've attached the dmesg, devinfo -ur, and devinfo -rv below. Thanks for any help solving this. -John DMESG: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Fri Apr 15 06:55:07 UTC 2011 nihard_at_zfscarp1.unx.sas.com:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: AMD Opteron(tm) Processor 252 (2605.97-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Family = f Model = 25 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> real memory = 17179869184 (16384 MB) avail memory = 16372264960 (15613 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP 00000083> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110316/tbfadt-638) ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20110316/tbfadt-638) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-35 on motherboard ioapic4 <Version 1.1> irqs 36-39 on motherboard ispfw: registered firmware <isp_1040> ispfw: registered firmware <isp_1040_it> ispfw: registered firmware <isp_1080> ispfw: registered firmware <isp_1080_it> ispfw: registered firmware <isp_12160> ispfw: registered firmware <isp_12160_it> ispfw: registered firmware <isp_2100> ispfw: registered firmware <isp_2200> ispfw: registered firmware <isp_2300> ispfw: registered firmware <isp_2322> ispfw: registered firmware <isp_2400> ispfw: registered firmware <isp_2400_multi> ispfw: registered firmware <isp_2500> ispfw: registered firmware <isp_2500_multi> kbd1 at kbdmux0 acpi0: <HP A05> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xf7bf0000-0xf7bf0fff irq 19 at device 0.0 on pci1 usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xf7be0000-0xf7be0fff irq 19 at device 0.1 on pci1 usbus1: <OHCI (generic) USB controller> on ohci1 pci1: <base peripheral> at device 2.0 (no driver attached) pci1: <base peripheral> at device 2.2 (no driver attached) vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1 isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 4.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 4.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem 0xf7cf0000-0xf7cf1fff,0xf7c80000-0xf7cbffff irq 24 at device 4.0 on pci2 ciss0: PERFORMANT Transport ciss0: got 0 MSI messages] pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci3: <ACPI PCI bus> on pcib3 bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xf7df0000-0xf7dfffff irq 28 at device 6.0 on pci3 bge0: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:16:35:3b:7b:52 bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xf7de0000-0xf7deffff irq 29 at device 6.1 on pci3 bge1: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:16:35:3b:7b:51 pcib4: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci4 pci5: <ACPI PCI bus> on pcib5 isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6000-0x60ff mem 0xf7ef0000-0xf7ef0fff irq 34 at device 7.0 on pci5 isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6400-0x64ff mem 0xf7ee0000-0xf7ee0fff irq 35 at device 7.1 on pci5 isp2: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6800-0x68ff mem 0xf7ed0000-0xf7ed0fff irq 32 at device 8.0 on pci5 isp3: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6c00-0x6cff mem 0xf7ec0000-0xf7ec0fff irq 33 at device 8.1 on pci5 pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci4 pci6: <ACPI PCI bus> on pcib6 mpt0: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> port 0x7000-0x70ff mem 0xf7ff0000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 36 at device 9.0 on pci6 mpt0: MPI Version=1.3.2.0 mpt1: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> port 0x7400-0x74ff mem 0xf7fd0000-0xf7fdffff,0xf7fc0000-0xf7fcffff irq 37 at device 9.1 on pci6 mpt1: MPI Version=1.3.2.0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc800-0xccfff,0xee000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 ppc0: cannot reserve I/O port range uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0 powernow0: <Cool`n'Quiet K8> on cpu0 powernow1: <Cool`n'Quiet K8> on cpu1 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <AMD> at usbus0 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AMD> at usbus1 uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered acd0: DVDROM <HL-DT-STDVD-ROM GDR-8084N/3.00> at ata0-master UDMA33 da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-4 device da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 277841MB (569018880 512 byte sectors: 255H 32S/T 65535C) da1 at isp0 bus 0 scbus3 target 0 lun 0 da1: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da1: 200.000MB/s transfers WWNN 0x2000001d385f036f WWPN 0x2100001d385f036f PortID 0xcd da1: Command Queueing enabled da1: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da2 at isp0 bus 0 scbus3 target 1 lun 0 da2: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da2: 200.000MB/s transfers WWNN 0x2000001d385f0707 WWPN 0x2100001d385f0707 PortID 0xcc da2: Command Queueing enabled da2: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da3 at isp0 bus 0 scbus3 target 2 lun 0 da3: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da3: 200.000MB/s transfers WWNN 0x2000001d385f05f8 WWPN 0x2100001d385f05f8 PortID 0xcb da3: Command Queueing enabled da3: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da4 at isp0 bus 0 scbus3 target 3 lun 0 da4: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da4: 200.000MB/s transfers WWNN 0x2000001d385ee1bd WWPN 0x2100001d385ee1bd PortID 0xca da4: Command Queueing enabled da4: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da5 at isp0 bus 0 scbus3 target 4 lun 0 da5: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da5: 200.000MB/s transfers WWNN 0x2000001d385f0344 WWPN 0x2100001d385f0344 PortID 0xc9 da5: Command Queueing enabled da5: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da6 at isp0 bus 0 scbus3 target 5 lun 0 da6: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da6: 200.000MB/s transfers WWNN 0x2000001d385efb54 WWPN 0x2100001d385efb54 PortID 0xc7 da6: Command Queueing enabled da6: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da7 at isp0 bus 0 scbus3 target 6 lun 0 da7: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da7: 200.000MB/s transfers WWNN 0x2000001d385efb51 WWPN 0x2100001d385efb51 PortID 0xc6 da7: Command Queueing enabled da7: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da8 at isp0 bus 0 scbus3 target 7 lun 0 da8: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da8: 200.000MB/s transfers WWNN 0x2000001d385f02e9 WWPN 0x2100001d385f02e9 PortID 0xc5 da8: Command Queueing enabled da8: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da9 at isp0 bus 0 scbus3 target 8 lun 0 da9: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da9: 200.000MB/s transfers WWNN 0x2000001d385f0269 WWPN 0x2100001d385f0269 PortID 0xc3 da9: Command Queueing enabled da9: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da10 at isp0 bus 0 scbus3 target 9 lun 0 da10: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da10: 200.000MB/s transfers WWNN 0x2000001d385f0653 WWPN 0x2100001d385f0653 PortID 0xbc da10: Command Queueing enabled da10: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da11 at isp0 bus 0 scbus3 target 10 lun 0 da11: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da11: 200.000MB/s transfers WWNN 0x2000001d385f0320 WWPN 0x2100001d385f0320 PortID 0xba da11: Command Queueing enabled da11: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da12 at isp0 bus 0 scbus3 target 11 lun 0 da12: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da12: 200.000MB/s transfers WWNN 0x2000001d385efb5f WWPN 0x2100001d385efb5f PortID 0xb9 da12: Command Queueing enabled da12: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da13 at isp0 bus 0 scbus3 target 12 lun 0 da13: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da13: 200.000MB/s transfers WWNN 0x2000001d385f061f WWPN 0x2100001d385f061f PortID 0xb6 da13: Command Queueing enabled da13: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da14 at isp0 bus 0 scbus3 target 13 lun 0 da14: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da14: 200.000MB/s transfers WWNN 0x2000001d385f040c WWPN 0x2100001d385f040c PortID 0xb5 da14: Command Queueing enabled da14: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da15 at isp0 bus 0 scbus3 target 14 lun 0 da15: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da15: 200.000MB/s transfers WWNN 0x2000001d385ee45d WWPN 0x2100001d385ee45d PortID 0xb2 da15: Command Queueing enabled da15: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da16 at isp0 bus 0 scbus3 target 15 lun 0 da16: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da16: 200.000MB/s transfers WWNN 0x2000001d385f0562 WWPN 0x2100001d385f0562 PortID 0xb1 da16: Command Queueing enabled da16: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da17 at isp0 bus 0 scbus3 target 16 lun 0 da17: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da17: 200.000MB/s transfers WWNN 0x2000001d385eddae WWPN 0x2100001d385eddae PortID 0xae da17: Command Queueing enabled da17: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da18 at isp0 bus 0 scbus3 target 17 lun 0 da18: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da18: 200.000MB/s transfers WWNN 0x2000001d385eec9a WWPN 0x2100001d385eec9a PortID 0xad da18: Command Queueing enabled da18: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da19 at isp0 bus 0 scbus3 target 18 lun 0 da19: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da19: 200.000MB/s transfers WWNN 0x2000001d385eedd0 WWPN 0x2100001d385eedd0 PortID 0xac da19: Command Queueing enabled da19: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da20 at isp0 bus 0 scbus3 target 19 lun 0 da20: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da20: 200.000MB/s transfers WWNN 0x2000001d385f0334 WWPN 0x2100001d385f0334 PortID 0xab da20: Command Queueing enabled da20: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da21 at isp0 bus 0 scbus3 target 20 lun 0 da21: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da21: 200.000MB/s transfers WWNN 0x2000001d385eddfe WWPN 0x2100001d385eddfe PortID 0xaa da21: Command Queueing enabled da21: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da22 at isp0 bus 0 scbus3 target 21 lun 0 da22: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da22: 200.000MB/s transfers WWNN 0x2000001d385ee053 WWPN 0x2100001d385ee053 PortID 0xa9 da22: Command Queueing enabled da22: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da23 at isp0 bus 0 scbus3 target 22 lun 0 da23: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da23: 200.000MB/s transfers WWNN 0x2000001d385eeb8c WWPN 0x2100001d385eeb8c PortID 0xa7 da23: Command Queueing enabled da23: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da24 at isp0 bus 0 scbus3 target 23 lun 0 da24: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da24: 200.000MB/s transfers WWNN 0x2000001d385f071e WWPN 0x2100001d385f071e PortID 0xa6 da24: Command Queueing enabled da24: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da25 at isp0 bus 0 scbus3 target 24 lun 0 da25: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da25: 200.000MB/s transfers WWNN 0x2000001d385f0247 WWPN 0x2100001d385f0247 PortID 0xa5 da25: Command Queueing enabled da25: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da26 at isp0 bus 0 scbus3 target 25 lun 0 da26: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da26: 200.000MB/s transfers WWNN 0x2000001d385ee03a WWPN 0x2100001d385ee03a PortID 0xa3 da26: Command Queueing enabled da26: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da27 at isp0 bus 0 scbus3 target 26 lun 0 da27: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da27: 200.000MB/s transfers WWNN 0x2000001d385f03f0 WWPN 0x2100001d385f03f0 PortID 0x9f da27: Command Queueing enabled da27: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da29 at isp2 bus 0 scbus5 target 0 lun 0 da29: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da29: 200.000MB/s transfers WWNN 0x2000001d385f036f WWPN 0x2200001d385f036f PortID 0xcd da29: Command Queueing enabled da29: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da30 at isp2 bus 0 scbus5 target 1 lun 0 da30: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da30: 200.000MB/s transfers WWNN 0x2000001d385f0707 WWPN 0x2200001d385f0707 PortID 0xcc da30: Command Queueing enabled da30: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da28 at isp0 bus 0 scbus3 target 27 lun 0 da28: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da28: 200.000MB/s transfers WWNN 0x2000001d385f02ef WWPN 0x2100001d385f02ef PortID 0x9e da28: Command Queueing enabled da28: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da31 at isp2 bus 0 scbus5 target 2 lun 0 da31: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da31: 200.000MB/s transfers WWNN 0x2000001d385f05f8 WWPN 0x2200001d385f05f8 PortID 0xcb da31: Command Queueing enabled da31: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da32 at isp2 bus 0 scbus5 target 3 lun 0 da32: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da32: 200.000MB/s transfers WWNN 0x2000001d385ee1bd WWPN 0x2200001d385ee1bd PortID 0xca da32: Command Queueing enabled da32: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da33 at isp2 bus 0 scbus5 target 4 lun 0 da33: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da33: 200.000MB/s transfers WWNN 0x2000001d385f0344 WWPN 0x2200001d385f0344 PortID 0xc9 da33: Command Queueing enabled da33: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da34 at isp2 bus 0 scbus5 target 5 lun 0 da34: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da34: 200.000MB/s transfers WWNN 0x2000001d385efb54 WWPN 0x2200001d385efb54 PortID 0xc7 da34: Command Queueing enabled da34: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da35 at isp2 bus 0 scbus5 target 6 lun 0 da35: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da35: 200.000MB/s transfers WWNN 0x2000001d385efb51 WWPN 0x2200001d385efb51 PortID 0xc6 da35: Command Queueing enabled da35: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da36 at isp2 bus 0 scbus5 target 7 lun 0 da36: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da36: 200.000MB/s transfers WWNN 0x2000001d385f02e9 WWPN 0x2200001d385f02e9 PortID 0xc5 da36: Command Queueing enabled da36: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da37 at isp2 bus 0 scbus5 target 8 lun 0 da37: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da37: 200.000MB/s transfers WWNN 0x2000001d385f0269 WWPN 0x2200001d385f0269 PortID 0xc3 da37: Command Queueing enabled da37: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da38 at isp2 bus 0 scbus5 target 9 lun 0 da38: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da38: 200.000MB/s transfers WWNN 0x2000001d385f0653 WWPN 0x2200001d385f0653 PortID 0xbc da38: Command Queueing enabled da38: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da39 at isp2 bus 0 scbus5 target 10 lun 0 da39: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da39: 200.000MB/s transfers WWNN 0x2000001d385f0320 WWPN 0x2200001d385f0320 PortID 0xba da39: Command Queueing enabled da39: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da40 at isp2 bus 0 scbus5 target 11 lun 0 da40: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da40: 200.000MB/s transfers WWNN 0x2000001d385efb5f WWPN 0x2200001d385efb5f PortID 0xb9 da40: Command Queueing enabled da40: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da41 at isp2 bus 0 scbus5 target 12 lun 0 da41: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da41: 200.000MB/s transfers WWNN 0x2000001d385f061f WWPN 0x2200001d385f061f PortID 0xb6 da41: Command Queueing enabled da41: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da42 at isp2 bus 0 scbus5 target 13 lun 0 da42: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da42: 200.000MB/s transfers WWNN 0x2000001d385f040c WWPN 0x2200001d385f040c PortID 0xb5 da42: Command Queueing enabled da42: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da43 at isp2 bus 0 scbus5 target 14 lun 0 da43: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da43: 200.000MB/s transfers WWNN 0x2000001d385ee45d WWPN 0x2200001d385ee45d PortID 0xb2 da43: Command Queueing enabled da43: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da44 at isp2 bus 0 scbus5 target 15 lun 0 da44: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da44: 200.000MB/s transfers WWNN 0x2000001d385f0562 WWPN 0x2200001d385f0562 PortID 0xb1 da44: Command Queueing enabled da44: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da45 at isp2 bus 0 scbus5 target 16 lun 0 da45: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da45: 200.000MB/s transfers WWNN 0x2000001d385eddae WWPN 0x2200001d385eddae PortID 0xae da45: Command Queueing enabled da45: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da46 at isp2 bus 0 scbus5 target 17 lun 0 da46: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da46: 200.000MB/s transfers WWNN 0x2000001d385eec9a WWPN 0x2200001d385eec9a PortID 0xad da46: Command Queueing enabled da46: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da47 at isp2 bus 0 scbus5 target 18 lun 0 da47: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da47: 200.000MB/s transfers WWNN 0x2000001d385eedd0 WWPN 0x2200001d385eedd0 PortID 0xac da47: Command Queueing enabled da47: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da48 at isp2 bus 0 scbus5 target 19 lun 0 da48: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da48: 200.000MB/s transfers WWNN 0x2000001d385f0334 WWPN 0x2200001d385f0334 PortID 0xab da48: Command Queueing enabled da48: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da49 at isp2 bus 0 scbus5 target 20 lun 0 da49: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da49: 200.000MB/s transfers WWNN 0x2000001d385eddfe WWPN 0x2200001d385eddfe PortID 0xaa da49: Command Queueing enabled da49: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da50 at isp2 bus 0 scbus5 target 21 lun 0 da50: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da50: 200.000MB/s transfers WWNN 0x2000001d385ee053 WWPN 0x2200001d385ee053 PortID 0xa9 da50: Command Queueing enabled da50: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da51 at isp2 bus 0 scbus5 target 22 lun 0 da51: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da51: 200.000MB/s transfers WWNN 0x2000001d385eeb8c WWPN 0x2200001d385eeb8c PortID 0xa7 da51: Command Queueing enabled da51: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da52 at isp2 bus 0 scbus5 target 23 lun 0 da52: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da52: 200.000MB/s transfers WWNN 0x2000001d385f071e WWPN 0x2200001d385f071e PortID 0xa6 da52: Command Queueing enabled da52: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da53 at isp2 bus 0 scbus5 target 24 lun 0 da53: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da53: 200.000MB/s transfers WWNN 0x2000001d385f0247 WWPN 0x2200001d385f0247 PortID 0xa5 da53: Command Queueing enabled da53: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da54 at isp2 bus 0 scbus5 target 25 lun 0 da54: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da54: 200.000MB/s transfers WWNN 0x2000001d385ee03a WWPN 0x2200001d385ee03a PortID 0xa3 da54: Command Queueing enabled da54: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da55 at isp2 bus 0 scbus5 target 26 lun 0 da55: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da55: 200.000MB/s transfers WWNN 0x2000001d385f03f0 WWPN 0x2200001d385f03f0 PortID 0x9f da55: Command Queueing enabled da55: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) da56 at isp2 bus 0 scbus5 target 27 lun 0 da56: <NETAPP X278_S15K5146F15 NA01> Fixed Direct Access SCSI-3 device da56: 200.000MB/s transfers WWNN 0x2000001d385f02ef WWPN 0x2200001d385f02ef PortID 0x9e da56: Command Queueing enabled da56: 143067MB (293002536 512 byte sectors: 255H 63S/T 18238C) SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM_MULTIPATH: adding da1 to Z23/8c735b3b-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da1 now active path in Z23 GEOM_MULTIPATH: adding da2 to Z12/8ba5f60c-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da2 now active path in Z12 GEOM_MULTIPATH: adding da3 to Z21/8c489326-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da3 now active path in Z21 GEOM_MULTIPATH: adding da4 to Z2/8b2f4cc2-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da4 now active path in Z2 GEOM_MULTIPATH: adding da5 to Z16/8be827d5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da5 now active path in Z16 GEOM_MULTIPATH: adding da6 to Z6/8b576b6e-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da6 now active path in Z6 GEOM_MULTIPATH: adding da7 to Z7/8b62f274-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da7 now active path in Z7 GEOM_MULTIPATH: adding da8 to Z26/8cb8679d-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da8 now active path in Z26 GEOM_MULTIPATH: adding da9 to Z25/8ca044b9-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da9 now active path in Z25 GEOM_MULTIPATH: adding da10 to Z18/8c0ce5c0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da10 now active path in Z18 GEOM_MULTIPATH: adding da11 to Z14/8bc620ac-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da11 now active path in Z14 GEOM_MULTIPATH: adding da12 to Z8/8b6ea237-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da12 now active path in Z8 GEOM_MULTIPATH: adding da13 to Z20/8c33cdef-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da13 now active path in Z20 GEOM_MULTIPATH: adding da14 to Z19/8c20a241-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da14 now active path in Z19 GEOM_MULTIPATH: adding da15 to Z5/8b4d559e-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da15 now active path in Z5 GEOM_MULTIPATH: adding da16 to Z22/8c5d2ca5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da16 now active path in Z22 GEOM_MULTIPATH: adding da17 to Z0/8b1f721b-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da17 now active path in Z0 GEOM_MULTIPATH: adding da18 to Z10/8b88dc00-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da18 now active path in Z10 GEOM_MULTIPATH: adding da19 to Z11/8b974a1a-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da19 now active path in Z11 GEOM_MULTIPATH: adding da20 to Z15/8bd6ffa0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da20 now active path in Z15 GEOM_MULTIPATH: adding da21 to Z1/8b26ebd0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da21 now active path in Z1 GEOM_MULTIPATH: adding da22 to Z4/8b4262e0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da22 now active path in Z4 GEOM_MULTIPATH: adding da23 to Z9/8b7b6a0c-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da23 now active path in Z9 GEOM_MULTIPATH: adding da24 to Z13/8bb5f0c5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da24 now active path in Z13 GEOM_MULTIPATH: adding da25 to Z24/8c8961c8-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da25 now active path in Z24 GEOM_MULTIPATH: adding da26 to Z3/8b387b58-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da26 now active path in Z3 GEOM_MULTIPATH: adding da27 to Z17/8bfaa1bf-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da27 now active path in Z17 GEOM_MULTIPATH: adding da28 to Z27/8cd11324-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: da28 now active path in Z27 GEOM_MULTIPATH: adding da29 to Z23/8c735b3b-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da30 to Z12/8ba5f60c-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da31 to Z21/8c489326-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da32 to Z2/8b2f4cc2-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da33 to Z16/8be827d5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da34 to Z6/8b576b6e-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da35 to Z7/8b62f274-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da36 to Z26/8cb8679d-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da37 to Z25/8ca044b9-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da38 to Z18/8c0ce5c0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da39 to Z14/8bc620ac-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da40 to Z8/8b6ea237-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da41 to Z20/8c33cdef-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da42 to Z19/8c20a241-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da43 to Z5/8b4d559e-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da44 to Z22/8c5d2ca5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da45 to Z0/8b1f721b-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da46 to Z10/8b88dc00-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da47 to Z11/8b974a1a-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da48 to Z15/8bd6ffa0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da49 to Z1/8b26ebd0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da50 to Z4/8b4262e0-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da51 to Z9/8b7b6a0c-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da52 to Z13/8bb5f0c5-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da53 to Z24/8c8961c8-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da54 to Z3/8b387b58-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da55 to Z17/8bfaa1bf-75d8-11e0-9ad7-0016353b7b52 GEOM_MULTIPATH: adding da56 to Z27/8cd11324-75d8-11e0-9ad7-0016353b7b52 Trying to mount root from ufs:/dev/da0s1a [rw]... carp1: link state changed to UP carp2: link state changed to UP DEVINFO.UR: Interrupt request lines: 0 (attimer0) 1 (atkbdc0) 3 (uart1) 4 (uart0) 5 (root0) 6 (fdc0) 7 (root0) 8 (atrtc0) 9 (acpi0) 10-11 (root0) 12 (psm0) 13 (root0) 14 (ata0) 15 (ata1) 16-18 (root0) 19 (ohci1) 19 (ohci0) 20-23 (root0) 24 (ciss0) 25-27 (root0) 28 (bge0) 29 (bge1) 30-31 (root0) 32 (isp2) 33 (isp3) 34 (isp0) 35 (isp1) 36 (mpt0) 37 (mpt1) 38-39 (root0) DMA request lines: 0-1 (root0) 2 (fdc0) 3-6 (root0) 7 (atdma0) I/O ports: 0x0-0xf (atdma0) 0x10-0x1f (root0) 0x20-0x21 (acpi0) 0x22-0x2d (root0) 0x2e-0x2f ---- 0x30-0x3f (root0) 0x40-0x43 (attimer0) 0x44-0x4f (root0) 0x50-0x51 (acpi0) 0x52-0x5f (root0) 0x60 (atkbdc0) 0x61 ---- 0x62-0x63 (root0) 0x64 (atkbdc0) 0x65-0x6f (root0) 0x70-0x73 ---- 0x74-0x7f (root0) 0x80-0x8f (atdma0) 0x90-0x91 (root0) 0x92 (acpi0) 0x93-0x9f (root0) 0xa0-0xa1 (acpi0) 0xa2-0xbf (root0) 0xc0-0xdf (atdma0) 0xe0-0xef (root0) 0xf0-0xf1 (acpi0) 0xf2-0x16f (root0) 0x170-0x177 (atapci0) 0x178-0x1ef (root0) 0x1f0-0x1f7 (atapci0) 0x1f8-0x21f (root0) 0x220-0x223 ---- 0x224-0x22f (root0) 0x230-0x233 (acpi0) 0x234-0x23f (root0) 0x240-0x25f ---- 0x260-0x267 (acpi0) 0x268-0x2f7 (root0) 0x2f8-0x2ff (acpi0) 0x300-0x375 (root0) 0x376 (atapci0) 0x377-0x3bf (root0) 0x3c0-0x3df (vga0) 0x3e0-0x3f1 (root0) 0x3f2-0x3f5 (fdc0) 0x3f6 (atapci0) 0x3f7 (fdc0) 0x3f8-0x3ff (uart0) 0x400-0x4cf (root0) 0x4d0-0x4d1 (acpi0) 0x4d2-0x7ff (root0) 0x800-0x81f (acpi0) 0x820-0x83f (root0) 0x840-0x85f (acpi0) 0x860-0x8ff (root0) 0x900-0x903 (acpi0) 0x904-0x907 (acpi0) 0x908-0x90b (acpi0) 0x90c-0x92e (acpi0) 0x92f (acpi0) 0x930-0x9ff (acpi0) 0xa00-0xc7f (root0) 0xc80-0xc87 (acpi0) 0xc88-0xcf8 (root0) 0xcf9 (acpi0) 0xcfa-0x1fff (root0) 0x2000-0x200f (atapci0) 0x2010-0x3fff (root0) 0x4000-0x40ff ---- 0x4100-0x43ff (root0) 0x4400-0x44ff (vgapci0) 0x4500-0x47ff (root0) 0x4800-0x48fe (brgphy1) 0x48ff (root0) 0x4900-0x4907 (brgphy1) 0x4908-0x4fff (root0) 0x5000-0x50ff (ciss0) 0x5100-0x5fff (root0) 0x6000-0x60ff (isp0) 0x6100-0x63ff (root0) 0x6400-0x64ff (isp1) 0x6500-0x67ff (root0) 0x6800-0x68ff (isp2) 0x6900-0x6bff (root0) 0x6c00-0x6cff (isp3) 0x6d00-0x6fff (root0) 0x7000-0x70ff (mpt0) 0x7100-0x73ff (root0) 0x7400-0x74ff (mpt1) 0x7500-0xffff (root0) I/O memory addresses: 0x0-0x9f3ff (ram0) 0x9f400-0x9ffff (root0) 0xa0000-0xbffff (vga0) 0xc0000-0xc7fff (orm0) 0xc8000-0xcbfff (orm0) 0xcc000-0xcc7ff (root0) 0xcc800-0xccfff (orm0) 0xcd000-0xedfff (root0) 0xee000-0xeffff (orm0) 0xf0000-0xfffff (root0) 0x100000-0xf57f7fff (ram0) 0xf57f8000-0xf5feffff (root0) 0xf5ff0000-0xf5ff0fff (vgapci0) 0xf5ff1000-0xf5ffffff (root0) 0xf6000000-0xf6ffffff (vgapci0) 0xf7000000-0xf7afffff (root0) 0xf7b00000-0xf7b7ffff ---- 0xf7b80000-0xf7b8ffff (root0) 0xf7b90000-0xf7b91fff ---- 0xf7b92000-0xf7b9ffff (root0) 0xf7ba0000-0xf7ba07ff ---- 0xf7ba0800-0xf7baffff (root0) 0xf7bb0000-0xf7bb01ff ---- 0xf7bb0200-0xf7bdffff (root0) 0xf7be0000-0xf7be0fff (ohci1) 0xf7be1000-0xf7beffff (root0) 0xf7bf0000-0xf7bf0fff (ohci0) 0xf7bf1000-0xf7c7ffff (root0) 0xf7c80000-0xf7cbffff (ciss0) 0xf7cc0000-0xf7ceffff (root0) 0xf7cf0000-0xf7cf1fff (ciss0) 0xf7cf2000-0xf7ddffff (root0) 0xf7de0000-0xf7deffff (bge1) 0xf7df0000-0xf7dfffff (bge0) 0xf7e00000-0xf7ebffff (root0) 0xf7ec0000-0xf7ec0fff (isp3) 0xf7ec1000-0xf7ecffff (root0) 0xf7ed0000-0xf7ed0fff (isp2) 0xf7ed1000-0xf7edffff (root0) 0xf7ee0000-0xf7ee0fff (isp1) 0xf7ee1000-0xf7eeffff (root0) 0xf7ef0000-0xf7ef0fff (isp0) 0xf7ef1000-0xf7fbffff (root0) 0xf7fc0000-0xf7fcffff (mpt1) 0xf7fd0000-0xf7fdffff (mpt1) 0xf7fe0000-0xf7feffff (mpt0) 0xf7ff0000-0xf7ffffff (mpt0) 0xf8000000-0xfdbfffff (root0) 0xfdc00000-0xfdc0001f (apic0) 0xfdc00020-0xfdc0ffff (root0) 0xfdc10000-0xfdc1001f (apic0) 0xfdc10020-0xfebfffff (root0) 0xfec00000-0xfec0001f (apic0) 0xfec00020-0xfec0ffff (root0) 0xfec10000-0xfec1001f (apic0) 0xfec10020-0xfec1ffff (root0) 0xfec20000-0xfec2001f (apic0) 0xfec20020-0xfedfffff (root0) 0xfee00000-0xfee003ff (apic0) 0xfee00400-0xffffffff (root0) 0x100000000-0x3ffffefff (ram0) 0x3fffff000-0xffffffffffffffff (root0) ACPI I/O ports: 0x20-0x21 (root0) 0x50-0x51 (root0) 0x92 (root0) 0xa0-0xa1 (root0) 0xf0-0xf1 (root0) 0x230-0x233 (root0) 0x260-0x267 (root0) 0x2f8-0x2ff (uart1) 0x4d0-0x4d1 (root0) 0x800-0x81f (root0) 0x840-0x85f (root0) 0x900-0x907 (root0) 0x908-0x90b (acpi_timer0) 0x90c-0x9ff (root0) 0xc80-0xc87 (root0) 0xcf9 (root0) ACPI I/O memory addresses: DEVINFO.RV: nexus0 apic0 I/O memory addresses: 0xfdc00000-0xfdc0001f 0xfdc10000-0xfdc1001f 0xfec00000-0xfec0001f 0xfec10000-0xfec1001f 0xfec20000-0xfec2001f 0xfee00000-0xfee003ff ram0 I/O memory addresses: 0x0-0x9f3ff 0x100000-0xf57f7fff 0x100000000-0x3ffffefff acpi0 Interrupt request lines: 9 I/O ports: 0x20-0x21 0x50-0x51 0x92 0xa0-0xa1 0xf0-0xf1 0x230-0x233 0x260-0x267 0x2f8-0x2ff 0x4d0-0x4d1 0x800-0x81f 0x840-0x85f 0x900-0x903 0x904-0x907 0x908-0x90b 0x90c-0x92e 0x92f 0x930-0x9ff 0xc80-0xc87 0xcf9 cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0 acpi_perf0 powernow0 cpufreq0 cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1 acpi_perf1 powernow1 cpufreq1 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU4 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU5 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU6 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU7 pcib0 pnpinfo _HID=PNP0A03 _UID=7 at handle=\_SB_.CFG0 pci0 pcib1 pnpinfo vendor=0x1022 device=0x7460 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=3 function=0 handle=\_SB_.CFG0.PCI0 pci1 ohci0 pnpinfo vendor=0x1022 device=0x7464 subvendor=0x0e11 subdevice=0x3202 class=0x0c0310 at slot=0 function=0 handle=\_SB_.CFG0.PCI0.USB1 Interrupt request lines: 19 I/O memory addresses: 0xf7bf0000-0xf7bf0fff usbus0 uhub0 ohci1 pnpinfo vendor=0x1022 device=0x7464 subvendor=0x0e11 subdevice=0x3202 class=0x0c0310 at slot=0 function=1 handle=\_SB_.CFG0.PCI0.USB2 Interrupt request lines: 19 I/O memory addresses: 0xf7be0000-0xf7be0fff usbus1 uhub1 unknown pnpinfo vendor=0x0e11 device=0xb203 subvendor=0x0e11 subdevice=0xb206 class=0x088000 at slot=2 function=0 handle=\_SB_.CFG0.PCI0.GROM I/O memory addresses: 0xf7bb0000-0xf7bb01ff unknown pnpinfo vendor=0x0e11 device=0xb204 subvendor=0x0e11 subdevice=0xb206 class=0x088000 at slot=2 function=2 I/O ports: 0x4000-0x40ff I/O memory addresses: 0xf7b00000-0xf7b7ffff 0xf7b90000-0xf7b91fff 0xf7ba0000-0xf7ba07ff vgapci0 pnpinfo vendor=0x1002 device=0x4752 subvendor=0x0e11 subdevice=0x001e class=0x030000 at slot=3 function=0 handle=\_SB_.CFG0.PCI0.VIDE I/O ports: 0x4400-0x44ff I/O memory addresses: 0xf5ff0000-0xf5ff0fff 0xf6000000-0xf6ffffff vgapm0 scpm0 drm0 isab0 pnpinfo vendor=0x1022 device=0x7468 subvendor=0x0e11 subdevice=0x3203 class=0x060100 at slot=4 function=0 handle=\_SB_.CFG0.IBRG isa0 sc0 vga0 I/O ports: 0x3c0-0x3df I/O memory addresses: 0xa0000-0xbffff orm0 I/O memory addresses: 0xc0000-0xc7fff 0xc8000-0xcbfff 0xcc800-0xccfff 0xee000-0xeffff atrtc0 Interrupt request lines: 8 ppc0 uart1 Interrupt request lines: 3 ACPI I/O ports: 0x2f8-0x2ff atapci0 pnpinfo vendor=0x1022 device=0x7469 subvendor=0x0e11 subdevice=0x3204 class=0x01018a at slot=4 function=1 I/O ports: 0x170-0x177 0x1f0-0x1f7 0x376 0x3f6 0x2000-0x200f ata0 at channel=0 Interrupt request lines: 14 acd0 ata1 at channel=1 Interrupt request lines: 15 unknown pnpinfo vendor=0x1022 device=0x746b subvendor=0x0e11 subdevice=0x3205 class=0x068000 at slot=4 function=3 handle=\_SB_.CFG0.TSMM pcib2 pnpinfo vendor=0x1022 device=0x7450 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=7 function=0 handle=\_SB_.CFG0.PCI1 pci2 ciss0 pnpinfo vendor=0x0e11 device=0x0046 subvendor=0x0e11 subdevice=0x4091 class=0x010400 at slot=4 function=0 handle=\_SB_.CFG0.PCI1.BORG Interrupt request lines: 24 I/O ports: 0x5000-0x50ff I/O memory addresses: 0xf7c80000-0xf7cbffff 0xf7cf0000-0xf7cf1fff ioapic0 pnpinfo vendor=0x1022 device=0x7451 subvendor=0x0000 subdevice=0x0000 class=0x080010 at slot=7 function=1 pcib3 pnpinfo vendor=0x1022 device=0x7450 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=8 function=0 handle=\_SB_.CFG0.PCI2 pci3 bge0 pnpinfo vendor=0x14e4 device=0x1648 subvendor=0x0e11 subdevice=0x00d0 class=0x020000 at slot=6 function=0 handle=\_SB_.CFG0.PCI2.NICA Interrupt request lines: 28 I/O memory addresses: 0xf7df0000-0xf7dfffff miibus0 brgphy0 pnpinfo oui=0x818 model=0x19 rev=0x0 at phyno=1 bge1 pnpinfo vendor=0x14e4 device=0x1648 subvendor=0x0e11 subdevice=0x00d0 class=0x020000 at slot=6 function=1 Interrupt request lines: 29 I/O memory addresses: 0xf7de0000-0xf7deffff miibus1 brgphy1 pnpinfo oui=0x818 model=0x19 rev=0x0 at phyno=1 I/O ports: 0x4800-0x48fe 0x4900-0x4907 ioapic1 pnpinfo vendor=0x1022 device=0x7451 subvendor=0x0000 subdevice=0x0000 class=0x080010 at slot=8 function=1 hostb0 pnpinfo vendor=0x1022 device=0x1100 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=0 handle=\_SB_.CFG0.NDE0 hostb1 pnpinfo vendor=0x1022 device=0x1101 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=1 handle=\_SB_.CFG0.MEMC hostb2 pnpinfo vendor=0x1022 device=0x1102 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=2 hostb3 pnpinfo vendor=0x1022 device=0x1103 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=3 hostb4 pnpinfo vendor=0x1022 device=0x1100 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=25 function=0 handle=\_SB_.CFG0.NDE1 hostb5 pnpinfo vendor=0x1022 device=0x1101 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=25 function=1 hostb6 pnpinfo vendor=0x1022 device=0x1102 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=25 function=2 hostb7 pnpinfo vendor=0x1022 device=0x1103 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=25 function=3 acpi_sysresource0 pnpinfo _HID=PNP0C02 _UID=0 at handle=\_SB_.CFG0.IBRG.MOMB unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.CFG0.IBRG.PIC_ attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.CFG0.IBRG.TIME Interrupt request lines: 0 I/O ports: 0x40-0x43 atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.CFG0.IBRG.DMA0 DMA request lines: 7 I/O ports: 0x0-0xf 0x80-0x8f 0xc0-0xdf unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.CFG0.IBRG.BEEP I/O ports: 0x61 atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.CFG0.IBRG.KBD_ Interrupt request lines: 1 I/O ports: 0x60 0x64 atkbd0 psm0 Interrupt request lines: 12 psmcpnp0 pnpinfo _HID=PNP0F13 _UID=0 at handle=\_SB_.CFG0.IBRG.PS2M unknown pnpinfo _HID=PNP0A06 _UID=0 at handle=\_SB_.CFG0.IBRG.S417 I/O ports: 0x2e-0x2f 0x70-0x73 0x220-0x223 0x240-0x25f uart0 pnpinfo _HID=PNP0501 _UID=0 at handle=\_SB_.CFG0.IBRG.S417.COMA Interrupt request lines: 4 I/O ports: 0x3f8-0x3ff fdc0 pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.CFG0.IBRG.S417.FDC0 Interrupt request lines: 6 DMA request lines: 2 I/O ports: 0x3f2-0x3f5 0x3f7 fd0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG0.TSMB pcib4 pnpinfo _HID=PNP0A03 _UID=8 at handle=\_SB_.CFG1 pci4 pcib5 pnpinfo vendor=0x1022 device=0x7450 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=9 function=0 handle=\_SB_.CFG1.PCI3 pci5 isp0 pnpinfo vendor=0x1077 device=0x2312 subvendor=0x1077 subdevice=0x010d class=0x0c0400 at slot=7 function=0 handle=\_SB_.CFG1.PCI3.S1F0 Interrupt request lines: 34 I/O ports: 0x6000-0x60ff I/O memory addresses: 0xf7ef0000-0xf7ef0fff isp1 pnpinfo vendor=0x1077 device=0x2312 subvendor=0x1077 subdevice=0x010d class=0x0c0400 at slot=7 function=1 handle=\_SB_.CFG1.PCI3.S1F1 Interrupt request lines: 35 I/O ports: 0x6400-0x64ff I/O memory addresses: 0xf7ee0000-0xf7ee0fff isp2 pnpinfo vendor=0x1077 device=0x2312 subvendor=0x1077 subdevice=0x010d class=0x0c0400 at slot=8 function=0 handle=\_SB_.CFG1.PCI3.S2F0 Interrupt request lines: 32 I/O ports: 0x6800-0x68ff I/O memory addresses: 0xf7ed0000-0xf7ed0fff isp3 pnpinfo vendor=0x1077 device=0x2312 subvendor=0x1077 subdevice=0x010d class=0x0c0400 at slot=8 function=1 handle=\_SB_.CFG1.PCI3.S2F1 Interrupt request lines: 33 I/O ports: 0x6c00-0x6cff I/O memory addresses: 0xf7ec0000-0xf7ec0fff ioapic2 pnpinfo vendor=0x1022 device=0x7451 subvendor=0x0000 subdevice=0x0000 class=0x080010 at slot=9 function=1 pcib6 pnpinfo vendor=0x1022 device=0x7450 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=10 function=0 handle=\_SB_.CFG1.PCI4 pci6 mpt0 pnpinfo vendor=0x1000 device=0x0626 subvendor=0x1000 subdevice=0x1040 class=0x0c0400 at slot=9 function=0 handle=\_SB_.CFG1.PCI4.S3F0 Interrupt request lines: 36 I/O ports: 0x7000-0x70ff I/O memory addresses: 0xf7fe0000-0xf7feffff 0xf7ff0000-0xf7ffffff mpt1 pnpinfo vendor=0x1000 device=0x0626 subvendor=0x1000 subdevice=0x1040 class=0x0c0400 at slot=9 function=1 handle=\_SB_.CFG1.PCI4.S3F1 Interrupt request lines: 37 I/O ports: 0x7400-0x74ff I/O memory addresses: 0xf7fc0000-0xf7fcffff 0xf7fd0000-0xf7fdffff ioapic3 pnpinfo vendor=0x1022 device=0x7451 subvendor=0x0000 subdevice=0x0000 class=0x080010 at slot=10 function=1 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F2 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F3 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F4 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F5 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F6 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S1F7 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F2 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F3 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F4 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F5 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F6 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI3.S2F7 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F2 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F3 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F4 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F5 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F6 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.CFG1.PCI4.S3F7 pci_link0 pnpinfo _HID=PNP0C0F _UID=0 at handle=\_SB_.LNKA pci_link1 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKB pci_link2 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKC pci_link3 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKD acpi_timer0 pnpinfo unknown at unknown ACPI I/O ports: 0x908-0x90bReceived on Sun Jun 05 2011 - 22:23:55 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:14 UTC