On Thu, Jun 9, 2011 at 3:22 PM, John Baldwin <jhb_at_freebsd.org> wrote: > Hmm, I would say 'progress' actually as it's getting better: > > >> map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled >> pcib1: attempting to grow prefetch window for (0xe0000000-0xefffffff,0x10000000) >> back candidate range: 0xe0000000-0xf0000000 > > It at least attempts to grow it now. > > This patch is a slightly more correct fix for the same bug as above but also > adds extra debugging so I can see why bus_adjust_resource() is failing to > grow the window. It won't fix it yet, but should output more debug info > when it fails to grow the window: see PS. > Index: pci_pci.c > =================================================================== > --- pci_pci.c (revision 222863) > +++ pci_pci.c (working copy) > _at__at_ -916,7 +934,8 _at__at_ pcib_grow_window(struct pcib_softc *sc, struct pci > > /* Move end_free down until it is properly aligned. */ > end_free &= ~(align - 1); > - front = end_free - count; > + end_free--; > + front = end_free - (count - 1); > > /* > * The resource would now be allocated at (front, > _at__at_ -944,7 +963,7 _at__at_ pcib_grow_window(struct pcib_softc *sc, struct pci > > /* Move start_free up until it is properly aligned. */ > start_free = roundup2(start_free, align); > - back = start_free + count; > + back = start_free + count - 1; > > /* > * The resource would now be allocated at (start_free, > _at__at_ -957,7 +976,7 _at__at_ pcib_grow_window(struct pcib_softc *sc, struct pci > if (bootverbose) > printf("\tback candidate range: %#lx-%#lx\n", > start_free, back); > - back = roundup2(back, w->step) - 1; > + back = roundup2(back + 1, w->step) - 1; > back -= rman_get_end(w->res); > } else > back = 0; > _at__at_ -976,6 +995,11 _at__at_ pcib_grow_window(struct pcib_softc *sc, struct pci > rman_get_end(w->res)); > if (error == 0) > break; > + if (bootverbose) > + device_printf(sc->dev, > + "failed to grow %s window to %#lx-%#lx: %d\n", > + w->name, rman_get_start(w->res) - front, > + rman_get_end(w->res), error); > front = 0; > } else { > error = bus_adjust_resource(sc->dev, type, w->res, > _at__at_ -983,6 +1007,11 _at__at_ pcib_grow_window(struct pcib_softc *sc, struct pci > rman_get_end(w->res) + back); > if (error == 0) > break; > + if (bootverbose) > + device_printf(sc->dev, > + "failed to grow %s window to %#lx-%#lx: %d\n", > + w->name, rman_get_start(w->res), > + rman_get_end(w->res) + back, error); > back = 0; > } > } ========== dmesg begins ========== Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0 r222709M: Sun Jun 5 20:01:55 CEST 2011 devhc_at_:/usr/obj/usr/src/sys/HQ i386 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.72-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Family = f Model = 2 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 536870912 (512 MB) avail memory = 513818624 (490 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xf7ee0000-0xf7eeffff irq 16 at device 0.0 on pci1 drm0: <ATI Radeon AP 9600> on vgapci0 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized radeon 1.31.0 20080613 vgapci1: <VGA-compatible display> mem 0xe0000000-0xefffffff,0xf7ef0000-0xf7efffff at device 0.1 on pci1 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc880-0xc89f irq 16 at device 29.0 on pci0 usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0 usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xf7dffc00-0xf7dfffff irq 23 at device 29.7 on pci0 usbus2: EHCI version 1.0 usbus2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: failed to allocate initial memory window: 0xf7f00000-0xfbffffff pci2: <ACPI PCI bus> on pcib2 skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xf7ffc000-0xf7ffffff irq 22 at device 5.0 on pci2 skc0: 3Com Gigabit LOM (3C940) rev. (0x1) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0e:a6:35:15:91 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 20 at device 12.0 on pci2 pcm0: <eMicro EM28028 AC97 Codec> pcm0: <Playback: DAC1,DAC2 / Record: ADC> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ata1: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]... ugen1.2: <vendor 0x04fc> at usbus1 ums0: <vendor 0x04fc USB Multi-Smart Mouse, class 0/0, rev 2.00/16.11, addr 2> on usbus1 ums0: 5 buttons and [XYZT] coordinates ID=1 info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] Num pipes: 1 info: [drm] writeback test succeeded in 1 usecs info: [drm] Num pipes: 1 info: [drm] Loading R300 Microcode info: [drm] Num pipes: 1 info: [drm] Num pipes: 1 info: [drm] Loading R300 Microcode info: [drm] Num pipes: 1 info: [drm] Num pipes: 1 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...0 0 done All buffers synced. MP Configuration Table version 1.1 found at 0xc00f1280 Table 'FACP' at 0x1ff30290 Table 'APIC' at 0x1ff30390 APIC: Found table at 0x1ff30390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #3 r222709M: Thu Jun 9 18:29:01 CEST 2011 devhc_at_:/usr/obj/usr/src/sys/HQ i386 Table 'FACP' at 0x1ff30290 Table 'APIC' at 0x1ff30390 Table 'OEMB' at 0x1ff40040 ACPI: No SRAT table found Preloaded elf kernel "/boot/kernel.HQ.r222709.copyin2.opie.pcibhax6/kernel" at 0xc0b9e000. Calibrating TSC clock ... TSC clock: 2798710268 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Family = f Model = 2 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size real memory = 536870912 (512 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001f5dcfff, 513503232 bytes (125367 pages) avail memory = 513818624 (490 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f5020 pnpbios: Entry = f0000:5c0a Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf9e30 00021 (v02 ACPIAM) ACPI: XSDT 0x1ff30100 0003C (v01 A M I OEMXSDT 10000414 MSFT 00000097) ACPI: FACP 0x1ff30290 000F4 (v03 A M I OEMFACP 10000414 MSFT 00000097) ACPI: DSDT 0x1ff303f0 0382D (v01 P4P81 P4P81104 00000104 INTL 02002026) ACPI: FACS 0x1ff40000 00040 ACPI: APIC 0x1ff30390 0005C (v01 A M I OEMAPIC 10000414 MSFT 00000097) ACPI: OEMB 0x1ff40040 0003F (v01 A M I OEMBIOS 10000414 MSFT 00000097) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 null: <null device, zero device> nfslock: pseudo-device random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled acpi0: <A M I OEMXSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) acpi0: wakeup code va 0xc26a4000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086) pcibios: BIOS version 2.10 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1fef0000 (3) failed ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2570, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled found-> vendor=0x8086, dev=0x2571, revid=0x02 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d2, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xc880, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xcc00, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24dd, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfbdffc00, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xfc00, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24d3, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 agp0: <Intel 82865 host to AGP bridge> on hostb0 agp0: allocating GATT for aperture of size 128M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: failed to allocate initial prefetch window: 0xd0000000-0xfaffffff pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfbe00000-0xfbefffff pcib1: no prefetched decode pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x4150, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled pcib1: allocated initial prefetch window of 0xd0000000-0xdfffffff pcib1: allocated prefetch range (0xd0000000-0xdfffffff) for rid 10 of pci0:1:0:0 map[14]: type I/O Port, range 32, base 0xd000, size 8, enabled pcib1: allocated I/O port range (0xd000-0xd0ff) for rid 14 of pci0:1:0:0 map[18]: type Memory, range 32, base 0xfbee0000, size 16, enabled pcib1: allocated memory range (0xfbee0000-0xfbeeffff) for rid 18 of pci0:1:0:0 pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x1002, dev=0x4170, revid=0x00 domain=0, bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled pcib1: attempting to grow prefetch window for (0xe0000000-0xefffffff,0x10000000) back candidate range: 0xe0000000-0xefffffff pcib1: failed to grow prefetch window to 0xd0000000-0xefffffff: 6 pcib1: attempting to grow memory window for (0xe0000000-0xefffffff,0x10000000) map[14]: type Memory, range 32, base 0xfbef0000, size 16, enabled pcib1: allocated memory range (0xfbef0000-0xfbefffff) for rid 14 of pci0:1:0:1 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfbee0000-0xfbeeffff irq 16 at device 0.0 on pci1 drm0: <ATI Radeon AP 9600> on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized radeon 1.31.0 20080613 vgapci1: <VGA-compatible display> mem 0xfbef0000-0xfbefffff at device 0.1 on pci1 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc880-0xc89f irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 50 usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usbus1: bpf attached uhci1: usbpf: Attached ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfbdffc00-0xfbdfffff irq 23 at device 29.7 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51 usbus2: EHCI version 1.0 usbus2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usbus2: bpf attached ehci0: usbpf: Attached pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfbf00000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10b7, dev=0x1700, revid=0x12 domain=0, bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfbffc000, size 14, enabled pcib2: allocated memory range (0xfbffc000-0xfbffffff) for rid 10 of pci0:2:5:0 map[14]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib2: allocated I/O port range (0xe800-0xe8ff) for rid 14 of pci0:2:5:0 pcib2: matched entry for 2.5.INTA pcib2: slot 5 INTA hardwired to IRQ 22 found-> vendor=0x1274, dev=0x5880, revid=0x04 domain=0, bus=2, slot=12, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec00, size 6, enabled pcib2: allocated I/O port range (0xec00-0xec3f) for rid 10 of pci0:2:12:0 pcib2: matched entry for 2.12.INTA pcib2: slot 12 INTA hardwired to IRQ 20 skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff irq 22 at device 5.0 on pci2 skc0: interrupt moderation is 100 us skc0: 3Com Gigabit LOM (3C940) rev. (0x1) skc0: chip ver = 0xb0 skc0: chip rev = 0x01 skc0: SK_EPROM0 = 0x00 skc0: SRAM size = 0x020000 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: bpf attached sk0: Ethernet address: 00:0e:a6:35:15:91 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 e1000phy0: OUI 0x000ac2, model 0x0002, rev. 3 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52 pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 20 at device 12.0 on pci2 pcm0: <eMicro EM28028 AC97 Codec (id = 0x454d4328)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features surround DAC, AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 169d000, 1000; 0xc2a9d000 -> 169d000 pcm0: sndbuf_setmap 169b000, 1000; 0xc2a9b000 -> 169b000 pcm0: sndbuf_setmap 1699000, 1000; 0xc2a99000 -> 1699000 pcm0: <Playback: DAC1,DAC2 / Record: ADC> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54 ata1: <ATA channel 1> on atapci0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 55 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. lapic: Divisor 2, Frequency 99952364 Hz Timecounters tick every 1.000 msec lo0: bpf attached usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe0:ata0:0:0:0): SIGNATURE: 0000 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 (aprobe0:ata1:0:0:0): SIGNATURE: eb14 ata1: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device ada0: Serial Number Y2JPFJPE ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 GEOM: new disk ada0 pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device pass0: Serial Number Y2JPFJPE (cd0:ata1:0:0:0): SCSI status error (cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): CAM status: SCSI Status Error (cd0:ata1:0:0:0): SCSI status: Check Condition (cd0:ata1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (cd0:ata1:0:0:0): Retrying command (per sense data) pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) pass1 at ata1 bus 0 scbus1 target 0 lun 0 pass1: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) (cd0:ata1:0:0:0): SCSI status error (cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): CAM status: SCSI Status Error (cd0:ata1:0:0:0): SCSI status: Check Condition (cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata1:0:0:0): Error 6, Unretryable error cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52 Timecounter "TSC" frequency 2798710268 Hz quality -100 GEOM: new disk cd0 GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). (cd0:ata1:0:0:0): SCSI status error (cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): CAM status: SCSI Status Error (cd0:ata1:0:0:0): SCSI status: Check Condition (cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata1:0:0:0): Error 6, Unretryable error (cd0:ata1:0:0:0): SCSI status error (cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): CAM status: SCSI Status Error (cd0:ata1:0:0:0): SCSI status: Check Condition (cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata1:0:0:0): Error 6, Unretryable error Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]... start_init: trying /sbin/init ugen1.2: <vendor 0x04fc> at usbus1 ums0: <vendor 0x04fc USB Multi-Smart Mouse, class 0/0, rev 2.00/16.11, addr 2> on usbus1 ums0: 5 buttons and [XYZT] coordinates ID=1 procfs registered Linux ELF exec handler installed linprocfs registered ========== dmesg ends ========== PS: u should learn to properly use backward references ("it") in ur sentences.Received on Thu Jun 09 2011 - 16:07:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:14 UTC