issues with new sata dvd-drive

From: Alexander Best <arundel_at_freebsd.org>
Date: Wed, 18 May 2011 08:24:59 +0000
hi there,

i recently switched my old pata dvd-drive with a new sata one:

cd0: <HL-DT-ST DVDRAM GH24NS50 XP02> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [355062 x 2048 byte records]

however now i experience the following issues:

1)
otaku% recoverdisk /dev/cd0 ~/test.iso 
Bigsize = 1048576, medsize = 65536, minsize = 2048
        start    size     block-len state          done     remaining    % done
    617611264  514048        514048     0     617611264        514048  99.91684
617611264 514048 failed (Device not configured)

2)
otaku% dd if=/dev/cd0 of=/home/arundel/test.iso bs=1048576 
dd: /dev/cd0: Device not configured
589+0 records in
589+0 records out
617611264 bytes transferred in 120.144189 secs (5140584 bytes/sec)

3)
otaku% dd if=/dev/cd0 of=/home/arundel/test.iso bs=65536  
dd: /dev/cd0: Device not configured
9431+0 records in
9431+0 records out
618070016 bytes transferred in 120.345870 secs (5135781 bytes/sec)

4)
otaku% dd if=/dev/cd0 of=/home/arundel/test.iso bs=2048 
load: 0.20  cmd: dd 50488 [physrd] 219.96r 0.17u 8.41s 1% 1016k
203127+0 records in
203127+0 records out
416004096 bytes transferred in 219.746150 secs (1893112 bytes/sec)
dd: /dev/cd0: Device not configured
301817+0 records in
301817+0 records out
618121216 bytes transferred in 371.835266 secs (1662352 bytes/sec)

...also when issuing this command (4)), at some point the drive starts spinning
down and then up again several times. this doesn't happen with a larger
blocksize (see 1-3)). i hit ctrl+t at the exact moment the drive started
spinning down the first time.

i'm seeing the following warnings via dmesg:

(cd0:ahcich2:0:0:0): READ(10). CDB: 28 0 0 4 9a c0 0 0 3b 0 
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,a,0,80 asc:64,0 (Illegal mode for this track)
(cd0:ahcich2:0:0:0): cddone: got error 0x6 back
(cd0:ahcich2:0:0:0): READ(10). CDB: 28 0 0 4 9a c0 0 0 3b 0 
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,a,0,80 asc:64,0 (Illegal mode for this track)
(cd0:ahcich2:0:0:0): cddone: got error 0x6 back
(cd0:ahcich2:0:0:0): READ(10). CDB: 28 0 0 4 9a c0 0 0 3b 0 
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,a,0,80 asc:64,0 (Illegal mode for this track)
(cd0:ahcich2:0:0:0): cddone: got error 0x6 back

i'm running a recent HEAD (r221878) on amd64. my kernel contains

device ahci
device scbus
device cd
device pass

this my sata controller:

ahci0: <Intel ICH9 AHCI SATA controller> port 0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem 0xfa206000-0xfa2067ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported

two other issues i'm experiencing (if their really are issues and not me doing
something wrong are:

1)
when running cdrecord(1) to burn a DVD (DVD+R) i get the following warning:

cdrecord: DMA speed too slow (OK for 10x). Cannot write at speed 18x.

2)
otaku% sudo cdrecord blank=fast
Cdrecord-ProDVD-ProBD-Clone 3.01a04 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Joerg Schilling
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=2,0,0.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH24NS50 '
Revision       : 'XP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
Starting to write CD/DVD/BD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.

taku% dd if=/dev/random of=./test.file bs=1m count=10
10+0 records in
10+0 records out
10485760 bytes transferred in 0.635699 secs (16494850 bytes/sec)

otaku% sudo cdrecord test.file
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 3.01a04 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Joerg Schilling
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=2,0,0.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH24NS50 '
Revision       : 'XP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Track 01: Total bytes read/written: 10485760/10485760 (5120 sectors).

otaku% dd if=/dev/cd0 of=./test.dao bs=1m count=10
10+0 records in
10+0 records out
10485760 bytes transferred in 9.587938 secs (1093641 bytes/sec)

otaku% sudo cdrecord blank=fast                       
Cdrecord-ProDVD-ProBD-Clone 3.01a04 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Joerg Schilling
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=2,0,0.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH24NS50 '
Revision       : 'XP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
Starting to write CD/DVD/BD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.

otaku% sudo cdrecord -tao test.file                   
Cdrecord-ProDVD-ProBD-Clone 3.01a04 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Joerg Schilling
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=2,0,0.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH24NS50 '
Revision       : 'XP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
Starting to write CD/DVD/BD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Track 01: Total bytes read/written: 10485760/10485760 (5120 sectors).
otaku% dd if=/dev/cd0 of=./test.tao bs=1m count=10
10+0 records in
10+0 records out
10485760 bytes transferred in 6.694222 secs (1566390 bytes/sec)

otaku% diff test.file test.dao

otaku% diff test.file test.tao

...so eventually nothing gets broken by the warning about the wrong startsec.

cheers.
alex

-- 
a13x
Received on Wed May 18 2011 - 06:24:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:14 UTC