rev 244030 route command is not working

I just upgraded to revision 244030. Unexpected route command is not working:

#route add default 192.168.1.1
route: fiboptlist_csv failed.


#netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
127.0.0.1          link#2             UH          0        6    lo0
192.168.1.0/24     link#3             U           0      491  wlan0
192.168.1.10       link#3             UHS         0        0    lo0

Internet6:
Destination                       Gateway                       Flags      Netif Expire
::1                               link#2                        UH          lo0
fe80::%lo0/64                     link#2                        U           lo0
fe80::1%lo0                       link#2                        UHS         lo0
fe80::%wlan0/64                   link#3                        U         wlan0
fe80::e2ca:94ff:fe7e:d00e%wlan0   link#3                        UHS         lo0
ff01::%lo0/32                     ::1                           U           lo0
ff01::%wlan0/32                   fe80::e2ca:94ff:fe7e:d00e%wlan0 U         wlan0
ff02::%lo0/32                     ::1                           U           lo0
ff02::%wlan0/32                   fe80::e2ca:94ff:fe7e:d00e%wlan0 U         wlan0


Old binary (from freebsd 9-stable) work fine:
./route add default 192.168.1.1
add net default: gateway 192.168.1.1

Delete default also failed:

route delete default
route: fiboptlist_csv failed.


Kernel config - GENERIC without -g
MALLOC_PRODUCTION=1

-- 
This message is for the person(s) named above only and may contain privileged, proprietary, or otherwise private information. If you received this transmission in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.