Rebuilding xorg-server with gcc resolves the problem, bt points at libdrm2. On Thu, Dec 13, 2012 at 10:51 PM, Artyom Mirgorodskiy < artyom_at_ijminteractive.net> wrote: > I have a similar problem when running firefox > > On Thursday 13 December 2012 15:49:38 Johannes Dieterich wrote: > > Dear all, > > > > I lately see xorg segfault 11s with CURRENT, WITH_NEW_XORG=yes and > > WITH_KMS=yes. Interestingly, gdm loads fine but xfce4 at login directly > > causes the segfault (log attached), gnome survives a bit longer but > > starting any bigger application (e.g. firefox) causes it to crash with > the > > same log. > > > > I have a Xorg.core file, but since it is without debug symbols the > > backtrace makes little sense to me. > > > > Unfortunately, I cannot tell what is the root cause of the problems as I > > first got bitten by the pcre update and also did the world update to the > > clang3.2 import. Needless to say that everything worked prior and the > > configuration (no xorg.conf here) did not change. > > > > uname -a: > > FreeBSD XXXXX 10.0-CURRENT FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13 > > 09:46:06 EST 2012 root_at_XXXXX:/usr/obj/usr/src/sys/GENERIC amd64. > > > > Xorg.0.log: > > [ 88.021] > > X.Org X Server 1.10.6 > > Release Date: 2012-02-10 > > [ 88.021] X Protocol Version 11, Revision 0 > > [ 88.021] Build Operating System: FreeBSD 10.0-CURRENT amd64 > > [ 88.021] Current Operating System: FreeBSD XXXXXXXXX 10.0-CURRENT > > FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13 09:46:06 EST 2012 > > root_at_XXXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > > [ 88.021] Build Date: 13 December 2012 06:30:07AM > > [ 88.021] > > [ 88.021] Current version of pixman: 0.24.2 > > [ 88.021] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 88.021] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 88.022] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 > > 15:01:42 2012 > > [ 88.024] (II) Loader magic: 0x7c1930 > > [ 88.024] (II) Module ABI versions: > > [ 88.024] X.Org ANSI C Emulation: 0.4 > > [ 88.024] X.Org Video Driver: 10.0 > > [ 88.024] X.Org XInput driver : 12.2 > > [ 88.024] X.Org Server Extension : 5.0 > > [ 88.025] (--) PCI:*(0:0:2:0) 8086:0166:17aa:2200 rev 9, Mem _at_ > > 0xf0000000/4194304, 0xe0000000/268435456, I/O _at_ 0x00005000/64, BIOS _at_ > > 0x????????/65536 > > [ 88.025] (==) Using default built-in configuration (30 lines) > > [ 88.025] (==) --- Start of built-in configuration --- > > [ 88.025] Section "Device" > > [ 88.025] Identifier "Builtin Default intel Device 0" > > [ 88.025] Driver "intel" > > [ 88.025] EndSection > > [ 88.025] Section "Screen" > > [ 88.025] Identifier "Builtin Default intel Screen 0" > > [ 88.025] Device "Builtin Default intel Device 0" > > [ 88.025] EndSection > > [ 88.025] Section "Device" > > [ 88.025] Identifier "Builtin Default vesa Device 0" > > [ 88.025] Driver "vesa" > > [ 88.025] EndSection > > [ 88.025] Section "Screen" > > [ 88.025] Identifier "Builtin Default vesa Screen 0" > > [ 88.025] Device "Builtin Default vesa Device 0" > > [ 88.025] EndSection > > [ 88.025] Section "Device" > > [ 88.025] Identifier "Builtin Default fbdev Device 0" > > [ 88.025] Driver "fbdev" > > [ 88.025] EndSection > > [ 88.025] Section "Screen" > > [ 88.025] Identifier "Builtin Default fbdev Screen 0" > > [ 88.025] Device "Builtin Default fbdev Device 0" > > [ 88.026] EndSection > > [ 88.026] Section "ServerLayout" > > [ 88.026] Identifier "Builtin Default Layout" > > [ 88.026] Screen "Builtin Default intel Screen 0" > > [ 88.026] Screen "Builtin Default vesa Screen 0" > > [ 88.026] Screen "Builtin Default fbdev Screen 0" > > [ 88.026] EndSection > > [ 88.026] (==) --- End of built-in configuration --- > > [ 88.026] (==) ServerLayout "Builtin Default Layout" > > [ 88.026] (**) |-->Screen "Builtin Default intel Screen 0" (0) > > [ 88.026] (**) | |-->Monitor "<default monitor>" > > [ 88.026] (**) | |-->Device "Builtin Default intel Device 0" > > [ 88.026] (==) No monitor specified for screen "Builtin Default intel > > Screen 0". > > Using a default monitor configuration. > > [ 88.026] (**) |-->Screen "Builtin Default vesa Screen 0" (1) > > [ 88.026] (**) | |-->Monitor "<default monitor>" > > [ 88.026] (**) | |-->Device "Builtin Default vesa Device 0" > > [ 88.026] (==) No monitor specified for screen "Builtin Default vesa > > Screen 0". > > Using a default monitor configuration. > > [ 88.026] (**) |-->Screen "Builtin Default fbdev Screen 0" (2) > > [ 88.027] (**) | |-->Monitor "<default monitor>" > > [ 88.027] (**) | |-->Device "Builtin Default fbdev Device 0" > > [ 88.027] (==) No monitor specified for screen "Builtin Default fbdev > > Screen 0". > > Using a default monitor configuration. > > [ 88.027] (==) Automatically adding devices > > [ 88.027] (==) Automatically enabling devices > > [ 88.027] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not > > exist. > > [ 88.027] Entry deleted from font path. > > [ 88.028] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does > not > > exist. > > [ 88.029] Entry deleted from font path. > > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does > not > > exist. > > [ 88.029] Entry deleted from font path. > > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does > not > > exist. > > [ 88.029] Entry deleted from font path. > > [ 88.029] (==) FontPath set to: > > /usr/local/lib/X11/fonts/TTF/, > > /usr/local/lib/X11/fonts/OTF/ > > [ 88.029] (==) ModulePath set to "/usr/local/lib/xorg/modules" > > [ 88.029] (II) The server relies on HAL to provide the list of input > > devices. > > If no devices become available, reconfigure HAL or disable > > AutoAddDevices. > > [ 88.029] (II) LoadModule: "extmod" > > [ 88.032] (II) Loading > > /usr/local/lib/xorg/modules/extensions/libextmod.so > > [ 88.033] (II) Module extmod: vendor="X.Org Foundation" > > [ 88.033] compiled for 1.10.6, module version = 1.0.0 > > [ 88.033] Module class: X.Org Server Extension > > [ 88.033] ABI class: X.Org Server Extension, version 5.0 > > [ 88.033] (II) Loading extension MIT-SCREEN-SAVER > > [ 88.033] (II) Loading extension XFree86-VidModeExtension > > [ 88.033] (II) Loading extension XFree86-DGA > > [ 88.033] (II) Loading extension DPMS > > [ 88.034] (II) Loading extension XVideo > > [ 88.034] (II) Loading extension XVideo-MotionCompensation > > [ 88.034] (II) Loading extension X-Resource > > [ 88.034] (II) LoadModule: "dbe" > > [ 88.034] (II) Loading > /usr/local/lib/xorg/modules/extensions/libdbe.so > > [ 88.035] (II) Module dbe: vendor="X.Org Foundation" > > [ 88.035] compiled for 1.10.6, module version = 1.0.0 > > [ 88.035] Module class: X.Org Server Extension > > [ 88.035] ABI class: X.Org Server Extension, version 5.0 > > [ 88.035] (II) Loading extension DOUBLE-BUFFER > > [ 88.035] (II) LoadModule: "glx" > > [ 88.035] (II) Loading > /usr/local/lib/xorg/modules/extensions/libglx.so > > [ 88.040] (II) Module glx: vendor="X.Org Foundation" > > [ 88.040] compiled for 1.10.6, module version = 1.0.0 > > [ 88.040] ABI class: X.Org Server Extension, version 5.0 > > [ 88.041] (==) AIGLX disabled > > [ 88.041] (II) Loading extension GLX > > [ 88.041] (II) LoadModule: "record" > > [ 88.042] (II) Loading > > /usr/local/lib/xorg/modules/extensions/librecord.so > > [ 88.043] (II) Module record: vendor="X.Org Foundation" > > [ 88.043] compiled for 1.10.6, module version = 1.13.0 > > [ 88.043] Module class: X.Org Server Extension > > [ 88.043] ABI class: X.Org Server Extension, version 5.0 > > [ 88.043] (II) Loading extension RECORD > > [ 88.043] (II) LoadModule: "dri" > > [ 88.043] (II) Loading > /usr/local/lib/xorg/modules/extensions/libdri.so > > [ 88.045] (II) Module dri: vendor="X.Org Foundation" > > [ 88.045] compiled for 1.10.6, module version = 1.0.0 > > [ 88.045] ABI class: X.Org Server Extension, version 5.0 > > [ 88.045] (II) Loading extension XFree86-DRI > > [ 88.046] (II) LoadModule: "dri2" > > [ 88.046] (II) Loading > /usr/local/lib/xorg/modules/extensions/libdri2.so > > [ 88.047] (II) Module dri2: vendor="X.Org Foundation" > > [ 88.047] compiled for 1.10.6, module version = 1.2.0 > > [ 88.047] ABI class: X.Org Server Extension, version 5.0 > > [ 88.047] (II) Loading extension DRI2 > > [ 88.047] (II) LoadModule: "intel" > > [ 88.047] (II) Loading > /usr/local/lib/xorg/modules/drivers/intel_drv.so > > [ 88.053] (II) Module intel: vendor="X.Org Foundation" > > [ 88.053] compiled for 1.10.6, module version = 2.17.0 > > [ 88.053] Module class: X.Org Video Driver > > [ 88.053] ABI class: X.Org Video Driver, version 10.0 > > [ 88.053] (II) LoadModule: "vesa" > > [ 88.053] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so > > [ 88.054] (II) Module vesa: vendor="X.Org Foundation" > > [ 88.054] compiled for 1.10.6, module version = 2.3.0 > > [ 88.054] Module class: X.Org Video Driver > > [ 88.054] ABI class: X.Org Video Driver, version 10.0 > > [ 88.054] (II) LoadModule: "fbdev" > > [ 88.057] (WW) Warning, couldn't open module fbdev > > [ 88.057] (II) UnloadModule: "fbdev" > > [ 88.057] (II) Unloading fbdev > > [ 88.057] (EE) Failed to load module "fbdev" (module does not exist, > 0) > > [ 88.057] (II) intel: Driver for Intel Integrated Graphics Chipsets: > > i810, > > i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, > 915G, > > E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview > G, > > 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, > > 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, > > Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), > > Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), > > Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), > > Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile > (GT2), > > Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge > Server > > [ 88.060] (II) VESA: driver for VESA chipsets: vesa > > [ 88.060] (--) Using syscons driver with X support (version 2.0) > > [ 88.060] (--) using VT number 9 > > > > [ 88.062] (II) Loading > /usr/local/lib/xorg/modules/drivers/intel_drv.so > > [ 88.062] (WW) Falling back to old probe method for vesa > > [ 88.062] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > > support > > [ 88.062] drmOpenDevice: node name is /dev/dri/card0 > > [ 88.062] Failed to change owner or group for file /dev/dri! 2: No > such > > file or directory > > [ 88.062] Failed to change owner or group for file /dev/dri/card0! 2: > No > > such file or directory > > [ 88.062] drmOpenDevice: open result is -1, (No such file or > directory) > > [ 88.062] Failed to change owner or group for file /dev/dri/card0! 2: > No > > such file or directory > > [ 88.062] drmOpenDevice: open result is -1, (No such file or > directory) > > [ 88.062] drmOpenDevice: Open failed > > [ 89.135] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > > [ 89.135] drmOpenDevice: node name is /dev/dri/card0 > > [ 89.135] drmOpenDevice: open result is 8, (OK) > > [ 89.135] drmOpenByBusid: drmOpenMinor returns 8 > > [ 89.135] drmOpenByBusid: Interface 1.4 failed, trying 1.1 > > [ 89.135] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > > [ 89.135] (II) intel(0): Creating default Display subsection in Screen > > section > > "Builtin Default intel Screen 0" for depth/fbbpp 24/32 > > [ 89.135] (==) intel(0): Depth 24, (--) framebuffer bpp 32 > > [ 89.135] (==) intel(0): RGB weight 888 > > [ 89.135] (==) intel(0): Default visual is TrueColor > > [ 89.135] (II) intel(0): Integrated Graphics Chipset: Intel(R) > Ivybridge > > Mobile (GT2) > > [ 89.135] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)" > > [ 89.135] (**) intel(0): Relaxed fencing enabled > > [ 89.135] (**) intel(0): Wait on SwapBuffers? enabled > > [ 89.135] (**) intel(0): Triple buffering? enabled > > [ 89.135] (**) intel(0): Framebuffer tiled > > [ 89.135] (**) intel(0): Pixmaps tiled > > [ 89.135] (**) intel(0): 3D buffers tiled > > [ 89.135] (**) intel(0): SwapBuffers wait enabled > > [ 89.136] (==) intel(0): video overlay key set to 0x101fe > > [ 89.136] (II) intel(0): Output LVDS1 has no monitor section > > [ 89.136] (II) intel(0): Output VGA1 has no monitor section > > [ 89.350] (II) intel(0): Output HDMI1 has no monitor section > > [ 89.368] (II) intel(0): Output DP1 has no monitor section > > [ 89.378] (II) intel(0): Output HDMI2 has no monitor section > > [ 89.387] (II) intel(0): Output HDMI3 has no monitor section > > [ 89.405] (II) intel(0): Output DP2 has no monitor section > > [ 89.423] (II) intel(0): Output DP3 has no monitor section > > [ 89.423] (II) intel(0): EDID for output LVDS1 > > [ 89.423] (II) intel(0): Manufacturer: SEC Model: 324c Serial#: 0 > > [ 89.423] (II) intel(0): Year: 2010 Week: 0 > > [ 89.423] (II) intel(0): EDID Version: 1.3 > > [ 89.423] (II) intel(0): Digital Display Input > > [ 89.423] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 > > [ 89.423] (II) intel(0): Gamma: 2.20 > > [ 89.424] (II) intel(0): DPMS capabilities: StandBy Suspend Off > > [ 89.424] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb > > 4:4:4 > > [ 89.424] (II) intel(0): First detailed timing is preferred mode > > [ 89.424] (II) intel(0): redX: 0.566 redY: 0.337 greenX: 0.351 > greenY: > > 0.560 > > [ 89.424] (II) intel(0): blueX: 0.150 blueY: 0.094 whiteX: 0.313 > > whiteY: 0.329 > > [ 89.424] (II) intel(0): Manufacturer's mask: 0 > > [ 89.424] (II) intel(0): Supported detailed timing: > > [ 89.424] (II) intel(0): clock: 98.2 MHz Image Size: 310 x 174 mm > > [ 89.424] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 > > h_blank_end 1760 h_border: 0 > > [ 89.424] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 > > v_blanking: 930 v_border: 0 > > [ 89.424] (II) intel(0): Unknown vendor-specific block f > > [ 89.424] (II) intel(0): SAMSUNG > > [ 89.424] (II) intel(0): LTN140KT03401 > > [ 89.424] (II) intel(0): EDID (in hex): > > [ 89.424] (II) intel(0): 00ffffffffffff004ca34c3200000000 > > [ 89.424] (II) intel(0): 00140103801f1178ea1d859156598f26 > > [ 89.424] (II) intel(0): 18505400000001010101010101010101 > > [ 89.424] (II) intel(0): 0101010101015d2640a060841e303020 > > [ 89.424] (II) intel(0): 250036ae100000190000000f00000000 > > [ 89.425] (II) intel(0): 000000000032c8043200000000fe0053 > > [ 89.425] (II) intel(0): 414d53554e470a204ca34b54000000fe > > [ 89.425] (II) intel(0): 004c544e3134304b54303334303100ca > > [ 89.425] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 89.425] (II) intel(0): Printing DDC gathered Modelines: > > [ 89.425] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 89.425] (II) intel(0): Not using default mode "320x240" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "512x384" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "640x480" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "640x512" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "800x600" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "896x672" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "928x696" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "960x720" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "700x525" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Not using default mode "1024x768" (doublescan > > mode not supported) > > [ 89.425] (II) intel(0): Printing probed modes for output LVDS1 > > [ 89.425] (II) intel(0): Modeline "1600x900"x60.0 98.21 1600 1648 > > 1680 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 89.425] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 > > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > > [ 89.426] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 > > 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > > [ 89.426] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 > > 1024 600 601 603 625 +hsync +vsync (35.2 kHz) > > [ 89.426] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 > > 800 480 490 492 525 -hsync -vsync (31.5 kHz) > > [ 89.426] (II) intel(0): EDID for output VGA1 > > [ 89.632] (II) intel(0): EDID for output HDMI1 > > [ 89.650] (II) intel(0): EDID for output DP1 > > [ 89.660] (II) intel(0): EDID for output HDMI2 > > [ 89.669] (II) intel(0): EDID for output HDMI3 > > [ 89.687] (II) intel(0): EDID for output DP2 > > [ 89.705] (II) intel(0): EDID for output DP3 > > [ 89.705] (II) intel(0): Output LVDS1 connected > > [ 89.705] (II) intel(0): Output VGA1 disconnected > > [ 89.705] (II) intel(0): Output HDMI1 disconnected > > [ 89.705] (II) intel(0): Output DP1 disconnected > > [ 89.705] (II) intel(0): Output HDMI2 disconnected > > [ 89.705] (II) intel(0): Output HDMI3 disconnected > > [ 89.705] (II) intel(0): Output DP2 disconnected > > [ 89.705] (II) intel(0): Output DP3 disconnected > > [ 89.705] (II) intel(0): Using exact sizes for initial modes > > [ 89.705] (II) intel(0): Output LVDS1 using initial mode 1600x900 > > [ 89.706] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless > > otherwise stated. > > [ 89.706] (II) intel(0): Kernel page flipping support detected, > enabling > > [ 89.706] (**) intel(0): Display dimensions: (310, 170) mm > > [ 89.706] (**) intel(0): DPI set to (131, 134) > > [ 89.706] (II) Loading sub module "fb" > > [ 89.706] (II) LoadModule: "fb" > > [ 89.707] (II) Loading /usr/local/lib/xorg/modules/libfb.so > > [ 89.709] (II) Module fb: vendor="X.Org Foundation" > > [ 89.709] compiled for 1.10.6, module version = 1.0.0 > > [ 89.709] ABI class: X.Org ANSI C Emulation, version 0.4 > > [ 89.709] (II) Loading sub module "dri2" > > [ 89.709] (II) LoadModule: "dri2" > > [ 89.709] (II) Loading > /usr/local/lib/xorg/modules/extensions/libdri2.so > > [ 89.710] (II) Module dri2: vendor="X.Org Foundation" > > [ 89.710] compiled for 1.10.6, module version = 1.2.0 > > [ 89.710] ABI class: X.Org Server Extension, version 5.0 > > [ 89.710] (II) UnloadModule: "vesa" > > [ 89.710] (II) Unloading vesa > > [ 89.710] (==) Depth 24 pixmap format is 32 bpp > > [ 89.710] (II) intel(0): [DRI2] Setup complete > > [ 89.710] (II) intel(0): [DRI2] DRI driver: i965 > > [ 89.710] (II) intel(0): Allocated new frame buffer 1600x900 stride > > 6656, tiled > > [ 89.716] (II) UXA(0): Driver registered support for the following > > operations: > > [ 89.716] (II) solid > > [ 89.716] (II) copy > > [ 89.716] (II) composite (RENDER acceleration) > > [ 89.716] (II) put_image > > [ 89.716] (II) get_image > > [ 89.716] (==) intel(0): Backing store disabled > > [ 89.716] (==) intel(0): Silken mouse enabled > > [ 89.716] (II) intel(0): Initializing HW Cursor > > [ 89.873] (II) intel(0): RandR 1.2 enabled, ignore the following RandR > > disabled message. > > [ 89.873] (==) intel(0): DPMS enabled > > [ 89.873] (==) intel(0): Intel XvMC decoder enabled > > [ 89.873] (II) intel(0): Set up textured video > > [ 89.874] (II) intel(0): [XvMC] xvmc_vld driver initialized. > > [ 89.874] (II) intel(0): direct rendering: DRI2 Enabled > > [ 89.874] (--) RandR disabled > > [ 89.874] (II) Initializing built-in extension Generic Event Extension > > [ 89.874] (II) Initializing built-in extension SHAPE > > [ 89.874] (II) Initializing built-in extension MIT-SHM > > [ 89.874] (II) Initializing built-in extension XInputExtension > > [ 89.874] (II) Initializing built-in extension XTEST > > [ 89.874] (II) Initializing built-in extension BIG-REQUESTS > > [ 89.874] (II) Initializing built-in extension SYNC > > [ 89.874] (II) Initializing built-in extension XKEYBOARD > > [ 89.874] (II) Initializing built-in extension XC-MISC > > [ 89.874] (II) Initializing built-in extension XINERAMA > > [ 89.874] (II) Initializing built-in extension XFIXES > > [ 89.874] (II) Initializing built-in extension RENDER > > [ 89.874] (II) Initializing built-in extension RANDR > > [ 89.874] (II) Initializing built-in extension COMPOSITE > > [ 89.874] (II) Initializing built-in extension DAMAGE > > [ 89.912] (II) AIGLX: Loaded and initialized > > /usr/local/lib/dri/swrast_dri.so > > [ 89.912] (II) GLX: Initialized DRISWRAST GL provider for screen 0 > > [ 89.913] (II) intel(0): Setting screen physical size to 423 x 238 > > [ 92.986] (II) config/hal: Adding input device AT Keyboard > > [ 92.987] (II) LoadModule: "kbd" > > [ 92.987] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so > > [ 92.988] (II) Module kbd: vendor="X.Org Foundation" > > [ 92.989] compiled for 1.10.6, module version = 1.6.1 > > [ 92.989] Module class: X.Org XInput Driver > > [ 92.989] ABI class: X.Org XInput driver, version 12.2 > > [ 92.989] (II) Using input driver 'kbd' for 'AT Keyboard' > > [ 92.989] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so > > [ 92.989] (**) AT Keyboard: always reports core events > > [ 92.989] (**) AT Keyboard: always reports core events > > [ 92.989] (**) Option "Protocol" "standard" > > [ 92.989] (**) Option "XkbRules" "base" > > [ 92.989] (**) Option "XkbModel" "pc105" > > [ 92.989] (**) Option "XkbLayout" "us" > > [ 92.989] (**) Option "config_info" > > "hal:/org/freedesktop/Hal/devices/atkbd_0" > > [ 92.989] (II) XINPUT: Adding extended input device "AT Keyboard" > (type: > > KEYBOARD) > > [ 95.110] (II) config/hal: Adding input device PS/2 Mouse > > [ 95.110] (II) LoadModule: "mouse" > > [ 95.111] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so > > [ 95.112] (II) Module mouse: vendor="X.Org Foundation" > > [ 95.112] compiled for 1.10.6, module version = 1.7.1 > > [ 95.112] Module class: X.Org XInput Driver > > [ 95.112] ABI class: X.Org XInput driver, version 12.2 > > [ 95.112] (II) Using input driver 'mouse' for 'PS/2 Mouse' > > [ 95.112] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so > > [ 95.112] (**) PS/2 Mouse: always reports core events > > [ 95.112] (**) Option "Device" "/dev/psm0" > > [ 95.112] (==) PS/2 Mouse: Protocol: "Auto" > > [ 95.112] (**) PS/2 Mouse: always reports core events > > [ 95.165] (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 > > [ 95.165] (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 > > [ 95.165] (**) PS/2 Mouse: Buttons: 9 > > [ 95.165] (**) Option "config_info" > > "hal:/org/freedesktop/Hal/devices/psm_0" > > [ 95.165] (II) XINPUT: Adding extended input device "PS/2 Mouse" > (type: > > MOUSE) > > [ 95.165] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 > > [ 95.165] (**) PS/2 Mouse: (accel) acceleration profile 0 > > [ 95.165] (**) PS/2 Mouse: (accel) acceleration factor: 2.000 > > [ 95.165] (**) PS/2 Mouse: (accel) acceleration threshold: 4 > > [ 95.183] (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0 > > [ 95.183] (II) PS/2 Mouse: SetupAuto: protocol is PS/2 > > [ 95.340] (II) PS/2 Mouse: ps2EnableDataReporting: succeeded > > [ 96.475] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 96.475] (II) intel(0): Printing DDC gathered Modelines: > > [ 96.475] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 96.755] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 96.755] (II) intel(0): Printing DDC gathered Modelines: > > [ 96.755] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 97.036] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 97.036] (II) intel(0): Printing DDC gathered Modelines: > > [ 97.036] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 97.315] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 97.315] (II) intel(0): Printing DDC gathered Modelines: > > [ 97.315] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 107.345] (II) intel(0): EDID vendor "SEC", prod id 12876 > > [ 107.345] (II) intel(0): Printing DDC gathered Modelines: > > [ 107.345] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648 > 1680 > > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) > > [ 108.696] Segmentation fault at address 0x3fffffffed > > [ 108.696] > > Fatal server error: > > [ 108.697] Caught signal 11 (Segmentation fault). Server aborting > > [ 108.697] > > [ 108.697] > > Please consult the The X.Org Foundation support > > at http://wiki.x.org > > for help. > > [ 108.697] Please also check the log file at "/var/log/Xorg.0.log" for > > additional information. > > [ 108.697] > > [ 108.698] (II) UnloadModule: "kbd" > > [ 108.698] (II) Unloading kbd > > [ 108.733] (II) UnloadModule: "mouse" > > [ 108.733] (II) Unloading mouse > > [ 108.733] (WW) intel(0): drmDropMaster failed: Unknown error: -22 > > > > Perhaps someone got an idea? > > > > Thanks a lot > > > > Johannes > > _______________________________________________ > > freebsd-current_at_freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > To unsubscribe, send any mail to " > freebsd-current-unsubscribe_at_freebsd.org" > -- > This message is for the person(s) named above only and may contain > privileged, proprietary, or otherwise private information. If you received > this transmission in error, please notify the sender immediately and delete > the original. Any other use of the email by you is prohibited. > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Thu Dec 13 2012 - 20:01:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:33 UTC