Re: USB3 and a Seagate FA GoFlex

On Fri, Feb 10, 2012 at 2:08 AM, Hans Petter Selasky <hselasky_at_c2i.net>wrote:

> On Friday 10 February 2012 07:53:16 Sam Fourman Jr. wrote:
> > UQ_MSC
>
> Try to add some of the quirks like this:
>
> usbconfig -d X.Y add_quirk UQ_MSC_XXX
>
> UQ_MSC_NO_INQUIRY
> UQ_MSC_NO_SYNC_CACHE
>
> Then replug your device.
>
>

Icarus# usbconfig
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen1.1: <XHCI root HUB 0x1b73> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen0.3: <product 0x3304 vendor 0x13d3> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen0.4: <USB2.0 UVC 2M WebCam USB2.0 UVC 2M WebCam> at usbus0, cfg=0
md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <FA GoFlex Desk Seagate> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=ON

Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_INQUIRY
Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_SYNC_CACHE



ugen1.2: <Seagate> at usbus1 (disconnected)
umass0: at uhub1, port 1, addr 1 (disconnected)
(pass2:umass-sim0:0:0:0): lost device
(pass2:umass-sim0:0:0:0): removing device entry
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
ugen1.2: <Seagate> at usbus1
umass0: <Seagate FA GoFlex Desk, class 0/0, rev 3.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4400
umass0:3:0:-1: Attached to scbus3
(probe0:umass-sim0:0:0:0): SCSI status error
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid
field in CDB)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: <  > Removable Direct Access SCSI-2 device
pass2: 400.000MB/s transfers
GEOM: new disk da0
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in
process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <  > Removable Direct Access SCSI-2 device
da0: 400.000MB/s transfers
da0: 1907729MB (3907029167 512 byte sectors: 255H 63S/T 243201C)
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error


--HPS
>



-- 

Sam Fourman Jr.
Fourman Networks
http://www.fourmannetworks.com