I was wondering if anyone is aware of any ongoing effort to support the on CPU temp sensors on the AMD K15 CPU's amdtemp only supports up to K11 so far as I can tell Sam Fourman Jr. Titan# dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #1 r231712: Tue Feb 14 15:46:59 CST 2012 root_at_Titan:/usr/obj/usr/src/sys/TITAN amd64 WARNING: WITNESS option enabled, expect reduced performance. link_elf_obj: symbol PHYS_TO_VM_PAGE undefined KLD file vboxdrv.ko - could not finalize loading module_register: module pci/sdhci already exists! Module pci/sdhci failed to register: 17 CPU: AMD FX(tm)-6100 Six-Core Processor (3624.21-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>> TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16497942528 (15733 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded cryptosoft0: <software crypto> on motherboard acpi0: <GBT GBTUACPI> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfca0000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf8000000-0xf9ffffff,0xd0000000-0xd7ffffff,0xdc000000-0xdfffffff irq 18 at device 0.0 on pci1 nvidia0: <GeForce GT 545> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io hdac0: <NVIDIA GT116 HDA Controller> mem 0xfbffc000-0xfbffffff irq 19 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfd1f8000-0xfd1fffff irq 17 at device 0.0 on pci2 xhci0: 64 byte context size. usbus0 on xhci0 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci3: <ACPI PCI bus> on pcib3 ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f mem 0xfdbff000-0xfdbff1ff irq 18 at device 0.0 on pci3 ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahci1: <ATI IXP700 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfdfff000-0xfdfff3ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ahcich4: <AHCI channel> at channel 2 on ahci1 ahcich5: <AHCI channel> at channel 3 on ahci1 ahcich6: <AHCI channel> at channel 4 on ahci1 ahcich7: <AHCI channel> at channel 5 on ahci1 ohci0: <OHCI (generic) USB controller> mem 0xfdffe000-0xfdffefff irq 18 at device 18.0 on pci0 usbus1: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xfdffc000-0xfdffcfff irq 18 at device 19.0 on pci0 usbus3: <OHCI (generic) USB controller> on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffb000-0xfdffb0ff irq 17 at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) hdac1: <ATI SB600 HDA Controller> mem 0xfdff4000-0xfdff7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 fwohci0: <VIA Fire II (VT6306)> port 0xbf00-0xbf7f mem 0xfddff000-0xfddff7ff irq 22 at device 14.0 on pci4 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:49:e5:50:51:51:05:00 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xcfd84000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:49:e5:51:05:00 fwe0: Ethernet address: 02:49:e5:51:05:00 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:49:e5:50:51:51:05:00 _at_ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode ohci2: <OHCI (generic) USB controller> mem 0xfdffa000-0xfdffafff irq 18 at device 20.5 on pci0 usbus5: <OHCI (generic) USB controller> on ohci2 pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfd9ff000-0xfd9fffff,0xfd9f8000-0xfd9fbfff irq 17 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 50:e5:49:bd:28:28 pcib6: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci6: <ACPI PCI bus> on pcib6 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfd8f8000-0xfd8fffff irq 17 at device 0.0 on pci6 xhci1: 64 byte context size. usbus6 on xhci1 pcib7: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci8: <ACPI PCI bus> on pcib8 ohci3: <OHCI (generic) USB controller> mem 0xfdff9000-0xfdff9fff irq 18 at device 22.0 on pci0 usbus7: <OHCI (generic) USB controller> on ohci3 ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfdff8000-0xfdff80ff irq 17 at device 22.2 on pci0 usbus8: EHCI version 1.0 usbus8: <EHCI (generic) USB 2.0 controller> on ehci2 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range hwpstate0: <Cool`n'Quiet 2.0> on cpu0 firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec hdacc0: <NVIDIA (0x0015) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0015) HDA CODEC Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0015) HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <NVIDIA (0x0015) HDA CODEC> at cad 1 on hdac0 hdaa1: <NVIDIA (0x0015) HDA CODEC Audio Function Group> at nid 1 on hdacc1 pcm1: <NVIDIA (0x0015) HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa1 hdacc2: <NVIDIA (0x0015) HDA CODEC> at cad 2 on hdac0 hdaa2: <NVIDIA (0x0015) HDA CODEC Audio Function Group> at nid 1 on hdacc2 pcm2: <NVIDIA (0x0015) HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa2 hdacc3: <NVIDIA (0x0015) HDA CODEC> at cad 3 on hdac0 hdaa3: <NVIDIA (0x0015) HDA CODEC Audio Function Group> at nid 1 on hdacc3 pcm3: <NVIDIA (0x0015) HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa3 hdacc4: <Realtek ALC889 HDA CODEC> at cad 0 on hdac1 hdaa4: <Realtek ALC889 HDA CODEC Audio Function Group> at nid 1 on hdacc4 pcm4: <Realtek ALC889 HDA CODEC PCM (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4 pcm5: <Realtek ALC889 HDA CODEC PCM (Front Analog)> at nid 27 and 25 on hdaa4 pcm6: <Realtek ALC889 HDA CODEC PCM (Rear Digital)> at nid 30 on hdaa4 pcm7: <Realtek ALC889 HDA CODEC PCM (Onboard Digital)> at nid 17 on hdaa4 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 5.0Gbps Super Speed USB v3.0 usbus7: 12Mbps Full Speed USB v1.0 usbus8: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b6f> at usbus0 uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <0x1b6f> at usbus6 uhub6: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 ugen7.1: <ATI> at usbus7 uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ugen8.1: <ATI> at usbus8 uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 uhub5: 2 ports with 2 removable, self powered uhub7: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub8: 4 ports with 4 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered ugen1.2: <Logitech> at usbus1 ugen3.2: <Logitech> at usbus3 ums1: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 2> on usbus1 ukbd0: <USB Keyboard> on usbus3 ums1: 8 buttons and [XYZ] coordinates ID=0 kbd2 at ukbd0 uhid0: <USB Keyboard> on usbus3 ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 ada0: <ST3250820AS 3.AAD> ATA-7 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad10 SMP: AP CPU #1 Launched! cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 cd0: <Optiarc DVD RW AD-7190S 1.01> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #5 Launched! Timecounter "TSC-low" frequency 14157085 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ada0p2 [rw]... lock order reversal: 1st 0xffffff83de30e8f8 bufwait (bufwait) _at_ /usr/src/sys/kern/vfs_bio.c:2658 2nd 0xfffffe0012346200 dirhash (dirhash) _at_ /usr/src/sys/ufs/ufs/ufs_dirhash.c:284 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 _witness_debugger() at _witness_debugger+0x2c witness_checkorder() at witness_checkorder+0x853 _sx_xlock() at _sx_xlock+0x5d ufsdirhash_acquire() at ufsdirhash_acquire+0x33 ufsdirhash_add() at ufsdirhash_add+0x19 ufs_direnter() at ufs_direnter+0x977 ufs_makeinode() at ufs_makeinode+0x28f VOP_CREATE_APV() at VOP_CREATE_APV+0x8d vn_open_cred() at vn_open_cred+0x46a kern_openat() at kern_openat+0x1f9 amd64_syscall() at amd64_syscall+0x39e Xfast_syscall() at Xfast_syscall+0xf7 --- syscall (5, FreeBSD ELF64, sys_open), rip = 0x80094931c, rsp = 0x7fffffffd798, rbp = 0x800c0708b --- fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 re0: link state changed to UP acquiring duplicate lock of same type: "os.lock_mtx" 1st os.lock_mtx _at_ nvidia_os.c:872 2nd os.lock_mtx _at_ nvidia_os.c:872 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 _witness_debugger() at _witness_debugger+0x2c witness_checkorder() at witness_checkorder+0x93a _mtx_lock_flags() at _mtx_lock_flags+0x85 os_acquire_spinlock() at os_acquire_spinlock+0x1a _nv014437rm() at _nv014437rm+0x9 lock order reversal: 1st 0xfffffe0012156620 pseudofs (pseudofs) _at_ /usr/src/sys/kern/vfs_syscalls.c:4181 2nd 0xffffffff811cafc0 allproc (allproc) _at_ /usr/src/sys/fs/pseudofs/pseudofs_vnops.c:765 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 _witness_debugger() at _witness_debugger+0x2c witness_checkorder() at witness_checkorder+0x853 _sx_slock() at _sx_slock+0x63 pfs_readdir() at pfs_readdir+0x101 kern_getdirentries() at kern_getdirentries+0x135 sys_getdirentries() at sys_getdirentries+0x23 amd64_syscall() at amd64_syscall+0x39e Xfast_syscall() at Xfast_syscall+0xf7 --- syscall (196, FreeBSD ELF64, sys_getdirentries), rip = 0x80153624c, rsp = 0x7fffffffd558, rbp = 0x1 --- pid 1776 (perl5.12.4), uid 0: exited on signal 6 (core dumped) pid 1774 (perl5.12.4), uid 0: exited on signal 6 (core dumped) lock order reversal: 1st 0xfffffe014285b098 ufs (ufs) _at_ /usr/src/sys/kern/vfs_syscalls.c:3583 2nd 0xffffff83df9bb358 bufwait (bufwait) _at_ /usr/src/sys/ufs/ffs/ffs_vnops.c:260 3rd 0xfffffe017cf787f8 ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:2167 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 _witness_debugger() at _witness_debugger+0x2c witness_checkorder() at witness_checkorder+0x853 __lockmgr_args() at __lockmgr_args+0xdc6 ffs_lock() at ffs_lock+0x8c VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b _vn_lock() at _vn_lock+0x47 vget() at vget+0x7b vfs_hash_get() at vfs_hash_get+0xd5 ffs_vgetf() at ffs_vgetf+0x48 softdep_sync_buf() at softdep_sync_buf+0x56a ffs_syncvnode() at ffs_syncvnode+0x2b3 ffs_fsync() at ffs_fsync+0x43 sys_fsync() at sys_fsync+0x14d amd64_syscall() at amd64_syscall+0x39e Xfast_syscall() at Xfast_syscall+0xf7 --- syscall (95, FreeBSD ELF64, sys_fsync), rip = 0x80a91884c, rsp = 0x7ffffe78ccb8, rbp = 0 --- -- Sam Fourman Jr. Fourman Networks http://www.fourmannetworks.comReceived on Tue Feb 21 2012 - 14:58:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:24 UTC