On Thu, Jun 28, 2012 at 8:15 PM, Kevin Oberman <kob6558_at_gmail.com> wrote: > On Thu, Jun 28, 2012 at 8:45 AM, Andrey Fesenko <f0andrey_at_gmail.com> wrote: >> I have lenovo thinkpad x220 >> >> # uname -a >> FreeBSD bsdx220 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r237683: Thu Jun >> 28 08:41:40 MSK 2012 root_at_bsdx220:/usr/obj/usr/src/sys/MY_INTEL >> amd64 >> >> # pciconf -lvb >> vgapci0_at_pci0:0:2:0: class=0x030000 card=0x21da17aa chip=0x01268086 >> rev=0x09 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '2nd Generation Core Processor Family Integrated >> Graphics Controller' >> class = display >> subclass = VGA >> bar [10] = type Memory, range 64, base 0xf0000000, size 4194304, enabled >> bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, >> size 268435456, enabled >> bar [20] = type I/O Port, range 32, base 0x6000, size 64, enabled >> >> After # kldload i915kms screen is black, if # kldunload i915kms panic > > Don't do this. It has been clearly stated that i915kms my not be > unloaded and that attempting to unload it WILL panic the system. > > Also, don't load i945kms. This WILL lock up the system with a blank screen. > > The modules required are autoloaded during Xorg initialization. Just > make absolutely sure that you have the latest version of > xf-video-intel. (If you installed a rather early version of the KMS > code, it is possible that you have two xf-video.intel* ports in your > tree, thought I don't expect this is the case. > -- > R. Kevin Oberman, Network Engineer > E-mail: kob6558_at_gmail.com Thank you so much, it worked :) necessary as it is written in the wikiReceived on Fri Jun 29 2012 - 06:49:05 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:28 UTC