Re: No ATA disks on 9.1-RC3

19.11.2012 13:19, Volodymyr Kostyrko пишет:
> 19.11.2012 10:59, Volodymyr Kostyrko wrote:
>> 19.11.2012 10:24, Alex Keda wrote:
>>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>>> ada0: <WDC WD1600BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device
>>> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>>> ada0: Command Queueing enabled
>>> ada0: 152627MB (312581809 512 byte sectors: 16H 63S/T 16383C)
>>> ada0: Previously was known as ad4
>>
>> Looking for this one? ATA_CAM was made default for now.
>
> Damn I'm sorry. Looks like I need my coffee back...
>
> The change actually is at:
>
> > ahci0: <ATI IXP600 AHCI SATA controller> port
> 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f
> mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
> > ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
>
> and
>
> > ahci0: <ATI IXP600 AHCI SATA controller> port
> 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f
> mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
> > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
> > ahci0: AHCI v0.00 with 1 ?Gbps ports, Port Multiplier not supported
> with FBS
> > ahci0: Caps: ?Gbps FBS 2cmd 1ports
>
> The bad thing about that is that there was no major rewrite of ahci
> code in this timeframe. There are some point that can be checked though:
>
> 1. What is your BIOS settings for controller? Can you try switching it
> between Legacy/Compatible mode? There was a change that fixed behavior
> for detecting different BIOS settings.
BIOS does not have SATA controller settings