Hi! > There were lots of reports that stock bge(4) does not work on Dell > Rx20/HP DL 360 G8. I tested it with 9.1-RC1 amd64 on a HP DL 360 G8. Without the patch, bge0 did not work (timeouts etc). With the patch, bge0 does work: bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3 bge0: APE FW version: NCSI v1.0.88.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: ac:16:2d:77:22:88 pci0:3:0:1: failed to read VPD data. > box. I'm especially interested in whether there is any ASF/IPMI > regression on BCM570x/571x. Any ipmi-specific tests I should make ? -- pi_at_opsec.eu +49 171 3101372 8 years to go !Received on Mon Sep 17 2012 - 08:41:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:30 UTC