On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote: > Hi, > > >On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote: > >> Hi, here is the dmesg output. > >> > >> bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem > >> 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci4 > >> bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E > >> miibus0: <MII bus> on bge0 > >> brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 > >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > >> > > > >It seems your controller is BCM5784 A1. The latest WIP have one > >change that may affect its DMA behavior. So it would be good to > >know how the WIP version works on your box. > > I update my system to 9-STABLE and using your WIP files. > after I reboot the whole system. I cannot find bge anymore. > > here is the pciconf -lv output. > > none1_at_pci0:4:0:0: class=0x020000 card=0x705d103c chip=0x165b14e4 > rev=0x10 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'NetXtreme BCM5723 Gigabit Ethernet PCIe' > class = network > subclass = ethernet Hmm, the WIP version didn't remove the chip id so bge(4) may have failed to attach. Could you check any message printed by bge(4) in dmesg output? > > Regards. > > Qian > > > > >> FreeBSD 9.0 RELEASE. > >> > >> Regards. > >> > >> Qian > >> > >> > > >> >watchdog timeouts can be triggered by various issues so it's hard > >> >to guess the root cause of the issue. > >> >Would you show me the dmesg output(bge(4)/brgphy(4) output > >> >only)? > >> >Received on Thu Sep 20 2012 - 22:56:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:30 UTC