Re: Call for bge(4) testers

From: Wanpeng Qian <spf72sa9_at_rhythm.ocn.ne.jp>
Date: Tue, 25 Sep 2012 11:46:14 +0900
>On Fri, Sep 21, 2012 at 08:34:29PM +0900, Wanpeng Qian wrote:
>> >On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
>> >> Hi,
>> >> 
>> >> >On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
>> >> >> Hi, here is the dmesg output.
>> >> >> 
>> >> >> bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> 
>> >> >> mem 
>> >> >> 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci4
>> >> >> bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
>> >> >> miibus0: <MII bus> on bge0
>> >> >> brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
>> >> >> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
>> >> >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-
>> >> >> flow
>> >> >> 
>> >> >
>> >> >It seems your controller is BCM5784 A1. The latest WIP have one
>> >> >change that may affect its DMA behavior. So it would be good to
>> >> >know how the WIP version works on your box.
>> >> 
>> >> I update my system to 9-STABLE and using your WIP files.
>> >> after I reboot the whole system. I cannot find bge anymore.
>> >> 
>> >> here is the pciconf -lv output.
>> >> 
>> >> none1_at_pci0:4:0:0:	class=0x020000 card=0x705d103c chip=0x165b14e4 
>> >> rev=0x10 hdr=0x00
>> >>     vendor     = 'Broadcom Corporation'
>> >>     device     = 'NetXtreme BCM5723 Gigabit Ethernet PCIe'
>> >>     class      = network
>> >>     subclass   = ethernet
>> >
>> >Hmm, the WIP version didn't remove the chip id so bge(4) may have
>> >failed to attach.
>> >Could you check any message printed by bge(4) in dmesg output?
>> 
>> There is neither message related to bge in the dmesg output.
>> nor ifconfig -a output.
>> 
>> anything else I can try ?
>
>Does stock bge(4) in latest stable/9 recognize your controller?
>If the answer is yes, would you post full verbose boot message?

I rebuild the kernel without your WIP files. unfortunately it seems 
9-STABLE drop the support of this card while 9.0-RELEASE is fine.

still no relate bge message in dmesg.

here is the output of pciconf -lcbv

none1_at_pci0:4:0:0:	class=0x020000 card=0x705d103c chip=0x165b14e4 
rev=0x10 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5723 Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 64, base 0xfe9f0000, size 65536, 
enabled
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 03[40] = VPD
    cap 09[60] = vendor (length 108)
    cap 05[50] = MSI supports 1 message, 64 bit 
    cap 10[cc] = PCI-Express 2 endpoint max data 128(256) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 d8d385fffeaf9f38
ecap 0004[16c] = unknown 1
Received on Tue Sep 25 2012 - 00:46:25 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:30 UTC